• 수완나부미
• /
• 제1권2호
• /
• pp.1-20
• /
• 2009

This research tries to review the history and concepts of Thai temple mural painting. According to the research results, the history of Thai mural painting dates back to the late 14th century when Wat Chedi Chet Taeo in Si Satchanalai was built. The Sinhalese elements embedded in the Sukhothai murals are also found in the Ayuthayan stupa murals made in the early 15th century. The mid 18th century's Burmese invasion into Ayuthaya destroyed most of Buddhist temples in the Kingdom of Ayuthaya and as a result, Buddhist murals of the late Ayuthayan age are hardly found except for some temple murals located outside of the capital. The late Ayuthayan murals are much different from the early Ayuthayan murals in that they are narrative in depicting Jataka and the life of Lord Buddha. This classical mural painting culminated in the age of Rama III of Bangkok Dynasty. His successor Rama IV undertook westernized reforms which influenced the area of traditional mural painting. Consequently, new western style Buddhist mural paintings were produced while themes of mural painting were enlarged to the other subjects such as historical recording of royal and social events. This trend continued in the age of Rama V but the development of Thai Buddhist mural painting discontinued after the death of Rama V due to the rapid westernization and decrease of illiteracy. The existing Buddhist murals produced on or before the reign of Rama V are deteriorating and disappearing. The reasons for this are partly because of Thailand's humid climate. However, some social backgrounds such as the lack of concern for preserving old Buddhist murals can not be disregarded. Considering the substantial value of Thai Buddhist murals as a cultural resource in Thai society, it is very urgent to establish appropriate conservation policy for them.

• 보존과학회지
• /
• 제38권4호
• /
• pp.334-346
• /
• 2022

The manufacturing technique was studied through the structure and material characteristics of the walls and the painting layers of the Avalokitesvara Bodhisattva mural of Geungnakjeon Hall, Daewonsa Temple. The mural is painted and connected to the earthen wall and the Junggit, and the wall is composed of wooden laths as a frame, the first and middle layers, the finishing layer, and the painting layer. The first layer, middle layer, and finishing layer constituting the wall were made by mixing weathered soil and sand. It was confirmed that the first layer had a high content of loess below silt, and the finishing layer had a high content of fine-sand and very fine sand. For the painting layer, a ground layer was prepared using soil-based mineral pigments, and lead white, white clay, atacamite, minium, and cinnabar (or vermilion) pigments were used on top of it. The Avalokitesvara Bodhisattva mural was confirmed to belong to a category similar to the soil-made buddhist mural paintings of Joseon Dynasty. However, it shows characteristics such as a high content of fine sand in the finishing layer and overlapping over other colors. Such material and structural characteristics can constitute important information for future mural conservation status diagnoses and conservation treatment plans.

• 보존과학회지
• /
• 제38권4호
• /
• pp.314-326
• /
• 2022

Investigation of conservation status, optical survey, infrared thermography, and ultrasonic examination were performed on Avalokitesvara Bodhisattva mural and Buddhist Monk Bodhidharma mural to determine the conservation status and physical properties. As a result of investigation of conservation status, the types of damage are largely divided into the wall and finishing layer damage, painting layer degradation, damage due to restoration materials, stains and contamination, and biological damage. As a result of the optical survey, drawing, stains, and repainted site were confirmed. Result of the infrared thermography, the delamination of the finishing layer was confirmed, and some locations and shapes of the wooden lath inside the wall were identified. The result of the 3D scanning, the deviation, and the separation of the wall was confirmed. As a result of ultrasonic examination, it was confirmed that the physical properties of the mural were identified and the ultrasonic speed was relatively low due to physical damage such as delamination and exfoliation of the finishing layer and cracking. Ultrasonic speed values were also high in some wall cracks or delamination, and it was confirmed by the infrared thermography results that the wooden lath inside the wall was located in those parts. It was possible to understand that the wooden lath inside the walls affects the ultrasonic speed during the ultrasonic examination. Therefore, management through periodic inspection of the relevant elements is necessary, and a countermeasure for damage that may occur in the future should be prepared along with intensive monitoring of the major damage identified in this diagnosis result.

• 보존과학회지
• /
• 제29권1호
• /
• pp.81-92
• /
• 2013

과거 국내 사찰벽화 보존처리는 유공성과 친수성의 특성을 고려한 재료선정이나 적합성에 대한 연구가 미흡한 상황에서 유럽의 재료 및 공법이 적용되었다. 그리고 합성수지를 사용하여 채색층 고착처리가 이루어진 벽화들은 현재까지 만족스럽지 못한 결과들이 나타나고 있다. 따라서 본 논문에서는 보존처리 효과를 규명하고자 사찰벽화 채색층 보강에 사용되는 고착제를 선별하여 고착처리 적용연구를 실시하였다. 고착제의 점도와 접착력 그리고 침투상태의 관계성을 파악한 결과 대부분 점도가 높은 시료에서 접착력이 증가하였고, 저점도의 시료에서는 접착력이 낮게 측정되었다. 시료별 고착제의 침투상태는 유사하지만 채색층과 토양 마감면의 상응 및 결합반응은 큰 차이점이 있는 것을 발견할 수 있었다. 동물성 아교와 MC의 경우, 채색층을 포함하여 토양과의 고착반응이 우수한 것으로 보이며, 토양과 견고하게 결속되어 안정적인 고착효과를 나타내는 것으로 판단된다. 합성수지계인 PVAc와 아크릴수지는 침투는 원활하지만, 토양과의 고착반응은 효과가 떨어지는 것으로 보인다.

• 보존과학회지
• /
• 제29권4호
• /
• pp.395-406
• /
• 2013

문화재의 손상 부위를 대상으로 하는 보존 처리는 원 유물의 재료와 유사한 물질로 복원하고 재처리가 가능하도록 해야 한다. 흙으로 구성된 우리나라의 사찰 벽화는 연질의 재질적 특성을 지니고 있는데, 그간 벽화의 균열과 박락 부위 보강에 사용되는 충전제(메움제)에 관한 연구들이 진행되었고, 전통 재료 활용의 적합성이 여러 연구 결과를 통해 밝혀졌다. 그러나 현재 이러한 연구 결과만을 가지고 사찰 벽화 보존 처리 현장에서 적용하기에는 몇 가지 제한점이 있다. 이는 충전제의 물리적 특성 연구가 부족하였으며 실제 보존 처리 시 요구되는 다양한 혼합 비율에 대한 규격이 마련되어 있지 않다는 점이다. 본고에서는 토벽화 충전제의 물리적 특성을 파악하기 위하여, 1 차 실험은 토양 혼합비 및 유기매제를 달리한 12 조건의 의사시료를 제작하여 비교 분석을 실시하고, 2 차 실험은 1 차 실험에서의 안정적인 조건의 결과를 토대로 실제 보존 처리 대상의 벽체 조건에 맞는 충전제를 제작 및 테스트 후 보존 처리에 적용하였다.

• 보존과학회지
• /
• 제38권1호
• /
• pp.45-54
• /
• 2022

This study examined the production technique of bracket murals in Daeungjeon Hall, Gaeamsa Temple by conducting a analysis of their wall structure, material characteristics, and painting layers. Wall was a single-branch structure with support layer, middle layer, finishing layer, and painting layer. The support layer, middle layer and finishing layer, were produced by mixing sand (quartz, feldspars etc.), and loess. The ratio of above medium sand to below fine sand was approximately 0.7 : 9.3 in the support layer, 4 : 6 in the middle layer and 6 : 4 in the finishing layer, which had a more percentage of above medium sand than the support layer. The analysis of the painting layer showed that natural soil pigment was used to establish a relatively ground layer of up to 50 ㎛, and pigments such as Lead sulfate, atacamite and mercury sulfide were painted on top of the layer. This study's results confirmed that the bracket mural paintings in Gaeamsa Temple are within the category of the production style of murals during the Joseon period. However, the points that the middle layer was formed several times, the significant difference in particle size distribution between the wall, and the absence of chopped straw in the support layer are a feature of bracket mural paintings in Gaeamsa Temple. These properties of murals as material and structure may be viewed for correlation with the degree of damage to wall structure of mural painting and would serve as an important reference to diagnosis the conservation conditions of murals or prepare conservation treatments.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.205-210
• /
• 2023

Stone cave paintings are continuous interactions as independent mediums in places such as text, images and stone cave architecture. Unlike Buddha statues, the narrative of the text always fascinates and guides the viewer to the timeliness of the image, that is, the narrative. In particular, in Buddhist art, Buddha statues are never simple images, and murals are never simple paintings. Before the Tang Dynasty, most unknown artists were artisans, and many artists still worked on murals in temples and palaces, and independent paintings such as scrolls and sides became an important form of painting after the Tang Dynasty, changing the mechanism of painting creation. In this paper, the graphic creation process prioritizes dedication and service, but we can still feel the creativity of the painters strongly. The historical resources of how to paint these paintings, the clues to the copies, and the precursor to the foreground, encourage the painters to constantly try to resemble each other and discover problems...Therefore, in this paper, it was confirmed that reinvention and creativity are very important, and that Dunhuang Buddhist art is the basis for artists' creation and the source of vitality.

• 보존과학회지
• /
• 제37권6호
• /
• pp.701-711
• /
• 2021

본 연구에서는 진도 쌍계사 대웅전 내부 벽화를 대상으로 현미경 조사, SEM-EDS, XRD, 입도분석 등을 통한 과학적 조사를 실시하여 벽화의 구조 및 재질특성을 파악하였다. 분석결과 벽체는 모래와 풍화토 등 토양을 사용하여 벽체를 제작하였으며, 초벽층, 중벽층, 그리고 마감층의 층위를 구성한 점들을 미루어 볼 때 전형적인 사찰벽화 토벽화 제작양식을 반영하고 있다. 그러나 토벽체 위에 석회로 마감층을 조성하고, 그 위에 징크 화이트를 사용하여 바탕칠한점 등의 특이점이 확인되었다. 또한 채색층의 균열 양상, 화면의 광택, 두께감 있는 붓 터치 등 유화 기법으로 제작된 회화 표면과 유사한 특징들이 관찰되었다. 연구 결과, 진도 쌍계사 대웅전 내부 벽화는 흙으로 벽체를 조성하였으나, 채색층은 건성유를 사용한 서양화 기법이 쓰인 것으로 판단되며, 이는 국내 현존하는 사찰벽화에서 유화 기법이 사용된 최초 연구 사례로 볼 수 있다.

• 보존과학연구
• /
• 통권29호
• /
• pp.65-90
• /
• 2008

This study examines the status and the physical features of Paraloid B-72 layers with examination of microstructure and analysis of organic matters. Paraloid B-72 layers were coated on samples from the colour layer of outer wall painting in Mireuk hall in Geumsan temple. On the basis of the previous examination result, it has made the samples which are similar to outer wall in Mireuk hall in Geumsan temple. The samples can be divided into two, one; 5% Paraloid B-72 coating and another is without coating. Then samples have been experimented under the compulsive environments of infrared radiation and immersion, thereafter compared the results of the damages and physical features between two samples. As a result of the comparison, the sample with Paraloid B-72 had more serious cracks, exfoliations and peeling layers than that of without Paraloid B-72. Otherwise, in the examination of ultraviolet radiation, the sample with Paraloid B-72 coating showed weaker physical properties, less density in structure of colour layer and less hardness in surface of colour layer than the sample without coating. The percentage of moisture content after the ultraviolet radiation was higher in the sample without Paraloid B-72 than the sample with Paraloid B-72 coating. Observing the conditions before the ultraviolet radiation, the sample with Paraloid B-72 coating demonstrated lower rate in moisture evaporation rate than the sample without Paraloid B-72. As a consequence, in examination of this samples, the change of physical features are increased in the sample with Paraloid B-72 coating than that without Paraloid B-72 when compulsive environment of heat, moisture and ultraviolet rays for a short term are imposed.

• 보존과학연구
• /
• 통권24호
• /
• pp.131-152
• /
• 2003

In ancient times, many kinds of different inorganic pigments were used as colorants for making objects. These pigments are still evidentin well known objects such as Danchung, mural painting and Buddhist painting. This study discusses the results obtained from an analysis of the pigments used on the Buddha pigments. The results can be briefly summarized as below; Firstly, the microcrystalline structures revealed on the cross section of analyzed pigments, samples of which were taken from various parts of Buddha pigments show that different sizes and shapes of pigment particle were used for different purposes such as coloring, toning of the pigments. The arrangement of pigments and their usages are varied according to the owner temples and the place where it was created. Secondly, a result of the analysis on the composition and structure of the pigments shows that the main components in their composition are: Red pigments - Red lead($Pb_3O_4$) and Cinnabar(HgS)Green pigments - Malachite[$CuCO_3$.$Cu(OH)_2$] and Prussian Blue[$Fe4(Fe(CN)_6)_2$]Gold pigments - pure gold(Au)Yellow pigments - Orpiment($A_s2S_3)White pigments - Lead Cyanamide[$Pb_3(CO_3)_2(OH)_2]Ultramarine pigments - Azulite[$Cu_3(CO_3)_2(OH)_2]Especially, we knew that pigments used on the Ssanggye temple not repaired to the artificial synthetic pigment