• Wind and Structures
• /
• v.31 no.5
• /
• pp.403-418
• /
• 2020

To investigate the effects of central buckles on the dynamic behavior and flutter stability of long-span suspension bridges, four different connection options between the main cable and the girder near the mid-span position of the Aizhai Bridge were studied. Based on the flutter derivatives obtained from wind tunnel tests, formulations of self-excited forces in the time domain were obtained using a nonlinear least square fitting method and a time-domain flutter analysis was realized. Subsequently, the influences of the central buckles on the critical flutter velocity, flutter frequency, and three-dimensional flutter states of the bridge were investigated. The results show that the central buckles can significantly increase the frequency of the longitudinal floating mode of the bridge and have greater influence on the frequencies of the asymmetric lateral bending mode and asymmetric torsion mode than on that of the symmetric ones. As such, the central buckles have small impact on the critical flutter velocity due to that the flutter mode of the Aizhai Bridge was essentially the symmetric torsion mode coupled with the symmetric vertical mode. However, the central buckles have certain impact on the flutter mode and the three-dimensional flutter states of the bridge. In addition, it is found that the phenomenon of complex beat vibrations (called intermittent flutter phenomenon) appeared in the flutter state of the bridge when the structural damping is 0 or very low.

• Journal of the Korean Society of Costume
• /
• v.27
• /
• pp.17-26
• /
• 1996

This thesis is to study the original form of Buckles of our country in ancient times On the upper garment bound the leather belts that was hanged a hook that shaped of animal form at the end. The background of Buckles was originated from those northern mounted normadic groups which was Scythe style costume culture. In Korea through the antique records and tombs bequests the styles of Buckles was divided into three groups horse-shaped tiger-shaped bar-shaped Buckle. These styles were influened by scythe style and developed greatly and trasmitted to Japan.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.38-51
• /
• 2006

In Scythian art the multitude of animal representations well illustrates the preoccupation of this nomadic people with animals in their environment. Usually only wild animals are represented. The purpose and meaning of the animal motifs used in Scythian ornaments appears that in some cases the work was intended to be purely ornamental, while many times the motifs had symbolic meaning (such as the successful dominance of the aggressor over the victim portrayed in the attack scenes). Following earlier Scythian migrations, Sarmatian animal-style art is distinguished by complex compositions in which stylized animals are depicted twisted or turned back upon themselves or in combat with other animals. Without copying nature, they accurately conveyed the essence of every beast depicted. Scythian bound the leather belts that was hanged a hook that shaped of different kinds at the end on the upper garment. Through the antique records and tombs bequests the styles of Scythian Buckles was divided into six groups, animal-shaped, animal's head shaped, animal fight-shaped, rectangle-shaped, rectangle openwork-shaped, genre scene shaped Buckle. In Korea, through the antique records and tombs bequests the styles of Buckles was horse-shaped and tiger-shaped Buckles that were influenced by scythe style.

• Korean Journal of Human Ecology
• /
• v.10 no.4
• /
• pp.365-378
• /
• 2001

This study aims to investigate the situation of clothing remains in the museums located in Jeolla Province and the problems appeared in the exhibitions, management and safekeeping in order to provide the basic data of costume studies which contribute to understanding our inherent clothing culture. The method of this study included classification of the clothing remains of the thirteen museums in Jeolla province according to the system used in the National Museum of Korea, the research data was analyzed by using charts. The result of this study is as following : The total of 8696 clothing remains were inspected, and these were consisted of 78% ornaments, 9.4% clothings, 5.4% hats, 4.4% shoes, 1.8% belts and buckles, 1.0% boxes for hats and clothes.

• Steel and Composite Structures
• /
• v.9 no.2
• /
• pp.89-101
• /
• 2009

This paper presents a simplified model to study post-buckling behaviours of the axially restrained steel column at elevated temperatures in fire. The contribution of axial deformation to the curvature of column section is included in theoretical equations. The possible unloading at the convex side of the column when buckling occurs is considered in the stress-strain relationship of steel at elevated temperatures. Parameters that affect structural behaviours of the axial restrained column in fire are studied. The axial restraint cause an increase in the axial force before the column buckles; the buckling temperature of restrained columns will be lower than non-restrained steel columns. However, the axial force of a restrained column decreases after the column buckles with the elevation of temperatures, so make use of the post-buckling behaviour can increase the critical temperature of restrained columns. Columns with temperature gradient across the section will produce lower axial force at elevated temperatures.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.209-216
• /
• 2019

Lead isotope ratios in horse-shaped bronze buckles excavated from the Songjeol-dong site in Cheongju and the mid-western region of the Korean Peninsula have been determined by thermal ionization mass spectrometry. The lead isotope ratios of the samples with data provenance were plotted in zone 3 of the South Korean galena map. The results indicated that the horse-shaped bronze buckles could be made using galena located in the same area as the archaeological site. These results can be used as basic data for comparison purposes in future studies on the manufacturing technology and provenance of bronze artifacts.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.61-70
• /
• 2013

A turn-buckle is capable of adjusting the tensile force by left-hand threads and right-hand threads between tension members. There are different types of turn-buckles according to tension member and connection form but the practical and existing turn-buckles are incapable of measuring the tensile force. A turn-buckle for adjusting and measuring tensile force has therefore been developed. This study shows the ultimate strength and reliability for measurement of the new turn-buckles through finite element analysis of the developed ones. From analytic results of the new turn-buckles which have the measurement limit loads of 100kN, 200kN and 300kN, the ultimate strength is approximately five times stronger than the measurement limit capacity. Additionally, a review of the new turn-buckle, which has the measurement limit load of over 300kN, shows that there is a tendency for the size of turn-buckle to become larger. So the connection devices were designed and the loading test was conducted from the concept that the parallel connection of turn-buckle with 300kN capacity can measure the tensile force of 600kN. The results of parallel loading test show the sufficient possibility. Furthermore, the mock-up test was constructed to investigate the release of initial load and corrosion when the new turn-buckle is installed at the outdoor and exposed to rain and atmosphere.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.28-31
• /
• 1997

Buckling analysis of thin compressed beam has been carried out. Pre-buckling and post-buckling are simulated by finite element method incorporating with the incremental nonlinear theory and the Newton-Raphson solution technique. In order to find the bifurcation point, the determinent of the stiffness matrix is calculated at every iteration procedure. For post-buckling analysis, a small perturbed initial guess is given along the eigenvector direction at the bifurcation point. Nonlinear elastic buckling and elastic-plastic buckling of cantilever beam are analyzed. The buckling load and buckled shape of the two models are compared.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.204-220
• /
• 2007

The background of Korean Ethnical Costume was originated from those northern mounted nomadic groups, which was Scythe style Costume Culture. Through the antique records and paintings of tombs bequests hereby describe the forms of Scythian Cotume (1) Headgear : There was Conical Cap(or Pointed Cap), Feathered Cap, and Crown. (2) Clothes : Both Men and Women wore Jacket as upper garment with leftsided collars, narrow sleeves to the length of the hip line. As lower garment, they wore the tight Trousers and Kungo(:窮袴)that was attached with gusset. (3) Belts and Boots : On the upper garment bound the leather Belts that was hanged a hook that was shaped of animal form at the end. Scythian Buckles was divided into six groups, animal-shaped, animal's head shaped, animal fight-shaped, rectangle-shaped, rectangle openwork-shaped, genre scene shaped Buckle. To the Boots, they wore leather boots. (4) Ornaments : Ornaments divided into Dress Trimming(:Gold plaques), Earrings, Necklaces(;Torques), Bracelets, Rings. Scythian Gold Plaques were divided into several types according to the shape, animal style(curved beast shape, profile shape, head reversed over its back shape), round shape, quadrilateral form, star shape, flower shape, crescent shape, bundle shape, human appearance. Earrings consisted of a plain ring and pendant ring was a middle ornament hung from it to a pendants which hung was made of heart shaped leaves of the tree, beads-linked. Scythian Torques were divided into several types according to the shape, Torque with Terminal style, Spiral style, Layers style, Crescent-shaped pectoral style, Crown style. Scythian Bracelet were divided into 4 styles according to the shape, Bracelets with ends shaped like beasts style, Spiral style, Layers style, Crown with openwork style. Rings were rhomb-shaped and animal shaped styleRings (5) Animal motifs used in Scythian ornaments appears that in some cases the work was intended to be purely ornamental, while many times the motifs had symbolic meaning (such as the successful dominance of the aggressor over the victim portrayed in the attack scenes). Magical use of symbols may have been inten-ded to guarantee the power of the aggressor.

• Journal of the Korean Society of Costume
• /
• v.61 no.10
• /
• pp.135-150
• /
• 2011

The ranking belts for Joseon dynasty officials that are based on references and relics are studied in this paper in terms of architecture, detailed names, and structural changes according to different time. Officials' uniforms consist of hats, clothes, belts, and shoes. Among these, the belt is an important sign that represents the wearer's ranking. The ranking belts of the Joseon dynasty which were brought from Ming at the late stage of the Koryo dynasty became classified as the following four classes : Seo-dai(a rhinoceros' horn, 犀帶), Gum-dai(gold, 金帶), Eun-dai(silver, 銀帶), and Heug-gag-dai(black horn, 黑角帶). A ranking belt consists of a basic belt body and a plaque that represents the wearer's rank. A plaque consists of 20 plates: three front-center plates that represent the Sam-tai(三台) constellation, six front-side plates that represent the Namduyug constellation(南斗六星), seven back plates that represent the Big Dipper(北斗七星), left side Bo(輔), right side Pil(弼), and a couple of Tamie at both ends. The architecture of the belt body; the basic frame for ranking belts, shows some differences between the former and the latter periods of the Joseon dynasty. In the former period, the belt had a pair of a buckle so that the wearers were able to adjust the belt size. But later, the belt didn't have the buckles to adjust the belt size and consequently it only performed a locking or unlocking function. Therefore, the belts in the latter period were longer than normal and one size fit all. In addition to the functional change of buckles, the shapes of the ranking belts show changes from the round shape to the square shape as time goes on.