• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.80-88
• /
• 1996

The aim of the present investigation was to see the effect of combined use of PDGF BB and IGF -1 on the guided tissue regeneration(GTR) using barrier membrane in the treatment of human furcation involvement. Twelve patients with initially diagnosed as having moderate to advanced adult periodontitis with mandibular class II buccal furcation defects have been wer selected. Initial scaling and root planing has been performed and baseline data consisting of probing depths and attachment levels have been recorded prior to surgical procedures. The GTR procedures using either barrier membrane(control : ePTFE) alone or together with the application of PDGF - BB and IGF -l(experimental : ePTFE+PDGF/IGF) have been done under the routine guidelines. During the surgery, the distance from CEJ either to the bottom of the bone defects(CEJ - BD) or to the bone crest(CEJ-BC) were measured. Horizontal distance to the deepest area in the furcal defects were measured from the reference line connection the most prominent bony walls of the two buccal roots. 6 months following the GTR therapy, all the measurements were made repeatedly. The probing attachment gain of the experimental and the control grous were 2.14mm and l.07mm, respectively with no statically significnant difference. Amont of vertical bone fill in the experimental and the control groups were 2.43mm and 2.29mm, rexpectively. Amonut of horizontal bone fill were 2.86mm in the experimental group and 2.17mm in the control group, respectively. However, there were no significant differences in the amount of bone fill(both vertical and horizontal)between the two groups.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.3
• /
• pp.42-48
• /
• 1990

This is a case report on an unusual - heavy buccal frenum in young lady which was treated by frenectomy, vestibuloplasty and total-palatal mucosal free graft. The authors noticed that this abnormal condition lead several chronic complications in young patient as like as premature loss of upper molar teeth, early and rapid loss of alveolar bone around insertion of frenum, over - extended eruption of lower molar teeth and abnormal mandibular movements, etc. After frenectomy and surgical extension of buccal vestiblue on both upper and lower posterior regions, we obtained a full - sized palatal mucosal graft and moved it on upper and lower extension area seperately as two pieces of free grafts to offer inherent function of denture - bearing mucogingiva and same color - matching with oral mucosa and to prevent post - operative relapse of vestibular height. We discussed here about unusual abnormality and their complications of unusual buccal frenum and its treatment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.43-66
• /
• 1997

Dental implant may be immediately placed in postextraction socket which has alveolar bone defect. The purpose of this study was to compare the bone regeneration and bone quality around defects adjacent to implants that were placed into extraction sockets according to EFEB, GTAM barrier and GTAM barrier with DFDB. Mandibular P2, P3 and P4 were extracted bilaterally in dogs, and buccal defects were created about 4mm in depth and 3.3mm in width. Screwed pure titanium implants, 3.8mm in diameter and 10mm in length, were placed into the extraction sockets. The experimental groups were divided into four groups : the G group was covered with a GTAM barrier on the defective area, the D+G group was filled with DFEB and covered with a GTAM barrier, the D group was filled with DFDB only and the control group was sutured without any special treatment on the defective area. The experimental animals were killed after 12 weeks and specimens were prepared for light microscopic evaluation and fluorescent dyes were administered daily for 2 weeks after implantation, and injected on the 4th and 11th week for fluorescent microscopic examination to observe new bone formation and bone remodeling. The new Bone height of the buccal defect was measured and compared with the another for bone gain and the removal torque for the implant was measured for the comparison of bone density and bone-implant osseointegration. Results obtained were as follows : 1. Experimental groups showed bone regeneration in oder from D+G, G, D group and control. D+G and G group was significantly from D group and control(P<0.01). 2. In the defective area of control the regenerated alveolar bone showed poorly developed lamellated structure and fibrous tissue intervention into the bone-implant interface but the others showed well developed lamellated structure and osseointegration. 3. All implant groups showed no significaant difference in the removal torque for implant(P>0.05) These results suggest that immediate implants placed in defective sockets were successfully osseointegrated and utilizing placed in defective sockets were successfully osseointegrated and utilizing not only the combination of GTAM and DFDB but also only the GTAM was favorable for the predictable regeneration of the defective area.

• Journal of Periodontal and Implant Science
• /
• v.48 no.3
• /
• pp.193-200
• /
• 2018

Purpose: The present study describes 3 patients with chronic periodontitis and consequent vertical resorption of the alveolar ridge who were treated using implant-based restoration with guided bone regeneration (GBR). Methods: After extraction of a periodontally compromised tooth, vertical bone augmentation using a K-incision was performed at the healed, low-level alveolar ridge. Results: The partial-split K-incision enabled soft tissue elongation without any change in buccal vestibular depth, and provided sufficient keratinized gingival tissue during GBR. Conclusions: Within the limits of this study, the present case series demonstrated that the novel K-incision technique was effective for GBR and allowed normal implant-based restoration and maintenance of a healthy periodontal condition. However, further long-term follow-up and a large-scale randomized clinical investigation should be performed to evaluate the feasibility of this technique.

• The korean journal of orthodontics
• /
• v.48 no.2
• /
• pp.98-106
• /
• 2018

Objective: This study aimed to explore the usefulness of adjunctive buccal and palatal corticotomy for adult maxillary expansion in an animal model using cone-beam computed tomography (CBCT). Methods: Twelve adult sheep were randomly divided into two groups (each n = 6): a control group, where no treatment was administered, and a treatment group, where buccal and palatal corticotomy-assisted maxillary expansion was performed. CBCT scans were taken before (T1) and after (T2) treatment. Differences in all transverse dental and alveolar dimensions, alveolar width at crest level, hard palate level, horizontal bone loss, interdental cusp width and inter-root apex were assessed using Wilcoxon signed-rank and Mann-Whitney U-tests. Kruskal-Wallis tests and pairwise comparisons were used to detect the significance of differences among the inter-premolar and inter-molar widths. Results: CBCT data revealed significant changes in all transverse dental and alveolar dimensions. The mean interpremolar alveolar width showed an increase of 2.29 to 3.62 mm at the hard palate level, 3.89 to 4.38 mm at the alveolar crest level, and 9.17 to 10.42 mm at the buccal cusp level. Dental changes in the vertical dimension were not significant. Conclusions: Our findings based on an adult animal model suggest that adjunctive buccal and palatal corticotomy can allow for both skeletal and dental expansion, with the amount of dental expansion exceeding that of skeletal expansion at alveolar crest and hard palate levels by two and three folds, respectively. Therefore, this treatment modality is potential to enhance the outcomes of maxillary expansion in adults.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.549-558
• /
• 2001

This study was undertaken to demonstrate the forces in the maxillary alveolar bone generated by the activation of the maxillary posterior crossbite appliance In the treatment of posterior buccal crossbite caused by buccal ectopic eruption of the maxillary second molar. A photoelastic model was fabricated using a Photoelastic material (PL-3) to simulate alveolar bone and ivory-colored resin teeth. The model was observed throughout the anterior and posterior view in a circular polariscope and recorded photographically before and after activation of the maxillary posterior crossbite appliance. The following conclusions were reached from this investigation : 1. When the traction force was applied on the palatal surface of the second molar, stresses were concentrated at the buccal and palatal root apices and alveolar crest area. The axis of rotation of palatal root was at the root apex and that of the buccal root was at the root li4 area. In this result, palatal tipping and rotating force were generated. 2. When the traction force was applied on the buccal surface of the second molar, more stresses than loading on the palatal surface were observed in the palatal and buccal root apices. Furthermore, the heavier stresses creating an intrusive force and controlled tipping force were recorded below the buccal and palatal root apices below the palatal root surface. In addition, the axis of rotation of palatal root disappeared whereas the rotation axis of the buccal root moved to the root apex from the apical 1/4 area. 3. When the traction force was simultaneously applied on the maxillary right and left second molars, the stress intensity around the maxillary first molar root area was greater than the stress generated by the only buccal traction of the maxillary right or left second molar. As in above mentioned results, we should realize that force application on the palatal surface of second molars with the maxillary posterior crossbite appliance Produced rotation of the second molar and palatal traction, which nay cause occlusal Interference. That is to say, we have to escape the rotation and uncontrolled tipping creating occlusal interference when correcting buccal posterior crossbite. For this purpose, we recommend buccal traction rather than palatal traction force on the second molar.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.5
• /
• pp.276-283
• /
• 2012

Objectives: Curettage and enucleation are two of the most common procedures performed in oral and maxillofacial surgery units. To access a cystic lesion, the buccal cortical plate is removed. The no reposition (NR) group underwent surgery without repositioning the buccal cortical plate. The reposition (R) group underwent surgery with a repositioning of the buccal cortical plate. This study compared the two surgical procedures in terms of bone healing and complications. Materials and Methods: Patients who underwent curettage and enucleation surgery were enrolled in this study. Panoramic radiographs of the patients in both the NR group (n=26) and R group (n=34) were taken at the baseline and at 6, 12 and 24 months after surgery. The radiolucent area was calculated to evaluate bony healing in each radiograph. The complications were analyzed through a review of the medical records. Results: The correlation between bony healing and surgical approach was not significant in the 6th, 12th, and 24th month (P<0.05). The complication rate was not associated with gender, graft material, bone graft and drain insertion (P<0.05). On the other hand, the R group had a higher complication rate (35.3%) than the NR group (0%). The difference in the mean lesion size between the NR group ($37,024{\pm}3,617$ pixel) and R group ($92,863{\pm}15,931$ pixel) was significant (independent t test, P=0.004). Conclusion: Although the reposition method is chosen when the lesion size is large, it is associated with more complications. Indeed, infection, discomfort and recurrence of the lesion were the most common complications in the R group. Furthermore, the R method does not have a strong point in terms of bone healing compared to the NR method. Therefore, the R method cannot be considered an ideal approach and should be used in limited cases.

• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.343-349
• /
• 2014

The dental osseointegration implant should be enough to endure occlusion load and it's required to have efficient design and use of implant to disperse the stress into bones properly. Solidworks as a finite element analysis program for modeling and analysis of stress distribution was used for the research. The simple crown model was designed on applying conjoined condition with tightening torque of 20 Ncm of a abutment screw between a cement retained implant abutment and a fixture. A $45^{\circ}$ oblique loading from lingual to buccal side on buccal cusps of crown and performed finite element analysis by 100 N of external load. The results by a analysis for stress distribution of supporting bones of fixture were as below. The von Mises stress was concentrated on the upper side of supporting compact bone regardless of the diameters and lengths of fixture, and the efficiency result of stress reduction was increase of fixture's diameter than it's length. Therefore, it's effective to use wider fixture as possible to the conditions of supporting jaw bone.

• Journal of Food Hygiene and Safety
• /
• v.14 no.1
• /
• pp.22-26
• /
• 1999

The purpose of this experiment was to examine the antimicrobial effect of the natural flavonoid hesperidin on dental caries and alveolar bone resorption in the albinorats. Twenty five day old male rats were fed with the experimental diets for 42 days. At the end of the 42 day experimental period, the molar tooth occlusal surface was examined by a dissecting microscope. The sulcular caries lesions were recorded: the first molar caries incidence was higher than that of the second molar and the third molar. Alvelolar bone resorption was measured on the buccal and lingual aspects of each molars. Three measurements were taken on the first molar (mesialpoint, midpoint, distalpoint). The results of this experiments, showed that hesperidin is effective in reducing dental caries and alveolar bone resorption.

• Restorative Dentistry and Endodontics
• /
• v.47 no.2
• /
• pp.17.1-17.8
• /
• 2022

Endodontic microsurgery is a predictable treatment option when orthograde treatment or retreatment is unsuccessful or unfeasible. However, when there is a gross compromise of periapical bone, achievement of bone regeneration after the surgical procedure may be hampered. In such cases, the application of guided tissue regeneration principles, with adjunctive use of leukocyte platelet-rich fibrin to fill the bone defect as a bone substitute and as a membrane to cover the site, provides a cost-effective solution with the benefits of accelerated physiological healing and reduced post-surgical pain and discomfort. This case report presents 2 cases of endodontic microsurgery of the upper lateral incisors with loss of buccal cortical plate, where platelet-rich fibrin was successfully applied.