• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.6
• /
• pp.530-534
• /
• 2011

This paper reports two cases of schwannomas arising from the oral cavity. One is an intraoral ancient schwannoma located at the left cheek, which evolved over a period of 13 years. The tumor was a well-demarcated buccal mass, which was located in the left lower first premolar area, with an obliterated the buccal vestibule, leaving the overlying mucosa intact. The second case was a central intraosseous schwannoma located from the left lower 1st molar periapical area to the left 3rd molar periapical area. Pathologically, the first mass was composed of the spindle shaped tumor cells with wavy nuclei beneath the fibroconnective tissue of the gingiva but second case mass was not. Occasional nuclear pleomorphism was observed but mitosis or necrosis was absent. There were Antoni A and B areas along with strong, diffuse staining with the S-100 protein. Ancient schwannomas were diagnosed. Schwannoma is a slow-growing benign tumor, and an ancient schwannoma that shows cellular atypism is a variant of a schwannoma caused by purely degenerative changes. To date, only limited cases of ancient schwannomas in the oral cavity have been reported.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.220-227
• /
• 2020

Purpose: This study aims to investigate the cusp variation pattern of the Korean mandibular second premolar and to determine the difference in tooth diameter and surface area using a virtual three-dimensional model. Methods: Dental casts from 69 students were scanned as a virtual dental models with a three-dimensional dental model scanner. Tooth diameter, absolute and relative individual areas, total crown area, the number of lingual cusps and central groove pattern were analyzed using RapidForm 2004. The Mann-Whitney U-test and the Kruskal-Wallis test were performed to verify sexual dimorphism, the difference in tooth diameter and surface according to the cusp variation pattern (α=0.05). Results: There was no significant difference except in buccolingual diameter (p<0.05) and buccolingual diameter at the cervix (p<0.05). The relative surface area of the total clinical crown was 65.76% for the buccal half and 34.24% for the lingual half, with a ratio of 2:1. In the case of the presence of two lingual cusps, the ratio was 21.47% for the mesiolingual half and 14.12% for the distaolingual half, with a ratio of 3:2. The dominant central groove patterns of the second premolar were the H-pattern (42.0%), followed by the Y-pattern (37.7%), then the U-pattern (20.3%). The relative buccal half was largest in the U-pattern central groove and the relative lingual half was largest in the Y-pattern central groove (p<0.05). Conclusion: This study is significant in that it measured quantitative surface areas and the findings could be a meaningful reference to comprehend dental anatomy in Koreans.

• The Journal of the Korean dental association
• /
• v.12 no.12
• /
• pp.913-918
• /
• 1974

The authors have observed clinically and histopathologically on two cases of rhabdomyosarcomas occurred in the oral cavity. The results were as follow: 1. A case of adult pleomorphic rhabdomyosarcoma, involving the right mandibular third molar area of 52 year old male, revealed pathological fracture of the right mandibular angle area. Microscopically, sections of this tumor showed cross striations by staining of phosphotungstic acid hematoxylin. 2. A case of embryonal alveolar rhabdomyosarcoma, involving the right buccal area of one year and ten months old female, revealed severe bone destruction on the right mandibular body area. Microscopically, sections of this tumor did not show cross striations.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.627-643
• /
• 1995

The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on the maxillary left first molar and then filled with composite resin. Three dimentional model with 3049 nodes and 2450 8-node blick elements was made by the serial photographic method and isthmus (1/4, 1/3, 1/2 and 2/3 of intercusplal distance between mesiobuccal cusp tip and mesiolingual cusp tip) was varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 1500N was applied vertically on the node from the lingual slope of the mesiobuccal cusp. The results were as follows : 1. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 2. When it comes to stress distribution, the stress was concentrated in the facio-gingival line angle and the buccal side of the distal margin of the cavity in both Band R model. 3. With the increase of the isthmus width, the stress decreased in the area of the facio-gingival line angle, and increased in the area of facio-gingival line angle as well as the buccal side of the distal margin of the cavity in B model. In R model, the stress increased both in the area of facio-gingival line angle and the buccal side of the distal margin of the cavity, therefore the possibility of crack increased. 4. As the width of cavity increased, in B model, the direction of crack moved from horizontal to vertical on the facio-gingival line angle and the facio-pulpal line angle. In R model, the direction of the crack was horizontal on the facio-gingival line angle and moved from horizontal to the $45^{\circ}$ direction on the facio-pulpal line angle.

• Imaging Science in Dentistry
• /
• v.32 no.3
• /
• pp.141-145
• /
• 2002

Purpose : The purpose of this study was to propose standard values for alveolar and basal bone in normal adult mandibles, and radiologically analyze the remodeling process of the edentulous mandible by examining molar areas and comparing them to the established normal values. Materials and Methods : Panoramic and CT scans of mandible were performed on 20 normal adults and 20 edentulous or partially edentulous adults. In both groups, arch half diameter and distance of alveolar bone were measured. Also the distance from the mandibular canal to the caudal edges, the buccal and lingual external borders of basal bone, were measured. A statistical comparison between the mean values of normal and edentulous mandibles was carried out in the selected areas. Results : There was evidence of decreasing arch half diameter and distance in the edentulous mandible, but statistically no significant change was seen between the normal and edentulous alveolar bone. There was evidence of decreasing buccal basal bone and increasing in the lingual basal bone in the edentulous mandible. A statistically significant difference between normal and edentulous mandibles was noted in the buccal basal bone. Conclusion: There was an inward and forward atrophic change of the edentulous mandibular molar area compared to the control. CT scanning required the use of sophisticated and expensive procedures to analyze the remodeling process of edentulous mandibles. Consequently, the development and application of a more simplified and objective radiographic procedure for broad and long-term study of remodeling procedures of edentulous mandible was recommended.

• Imaging Science in Dentistry
• /
• v.50 no.2
• /
• pp.133-139
• /
• 2020

Purpose: This study compared 2 cone-beam computed tomography (CBCT) systems in the detection of mechanically simulated peri-implant buccal bone defects in dry human mandibles. Materials and Methods: Twenty-four implants were placed in 7 dry human mandibles. Peri-implant bone defects were created in the buccal plates of 16 implants using spherical burs. All mandibles were scanned using 2 CBCT systems with their commonly used acquisition protocols: i-CAT Gendex CB-500 (Imaging Sciences, Hatfield, PA, USA; field of view [FOV], 8 cm×8 cm; voxel size, 0.125 mm; 120 kVp; 5 mA; 23 s) and Orthopantomograph OP300 (Intrumentarium, Tuusula, Finland; FOV, 6 cm×8 cm; voxel size, 0.085 mm; 90 kVp; 6.3 mA; 13 s). Two oral and maxillofacial radiologists assessed the CBCT images for the presence of a defect and measured the depth of the bone defects. Diagnostic performance was compared in terms of the area under the curve (AUC), accuracy, sensitivity, specificity, and intraclass correlation coefficient. Results: High intraobserver and interobserver agreement was found (P<0.05). The OP300 showed slightly better diagnostic performance and higher detection rates than the CB-500 (AUC, 0.56±0.03), with a mean accuracy of 75.0%, sensitivity of 81.2%, and specificity of 62.5%. Higher contrast was observed with the CB-500, whereas the OP300 formed more artifacts. Conclusion: Within the limitations of this study, the present results suggest that the choice of CBCT systems with their respective commonly used acquisition protocols does not significantly affect diagnostic performance in detecting and measuring buccal peri-implant bone loss.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.217-230
• /
• 1997

The location of the mandibular canal and the cortical thickness of the mandible is important in the practice of dentistry. This study was performed on twenty chosen dry mandibles, which were of adults and included fully erupted premolars and molars. The purpose of this study was to evaluate the location of the mandibular canal and the cortical thickness of the mandible on computed tomograms and to aid in the surgical treatment plans. The obtained results were as follows; 1. The horizontal distance between the mandibular canal and the buccal external border was 6.6±0.9mm on Somesial root of the first molar), and it was increased posteriorly. The horiwntal distance between the mandibular canal and the lingual external border was 4.1±1.lmm on S/sub 0/, and it was decreased posteriorly. 2. The vertical distance between the alveolar crest and the mandibular canal was 16.9±1.6mm on S/sub 0/, and it was decreased posteriorly. The vertical distance between the inferior border of mandible and the mandibular canal was 8.8±1.3mm on S/sub 0/, and it was increased anteriorly and posteriorly. 3. The thickness of the buccal cortical plate was 2.2±0.4mm on S/sub 0/. and it was increased posteriorly. But, that of the lingual cortical plate was 2.0±0.6mm on S/sub 0/ and it was decreased posteriorly. 4. The area of the buccal cortical plate was 66.5±1.0mm² on S/sub 0/. and it was increased posteriorly. But, that of the lingual cortical plate was 65.8±0.9mm² on S/sub 0/ and it was decreased posteriorly.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.4
• /
• pp.818-839
• /
• 1996

The strain gage, holographic and photoelastic analysis etc. have been used for stress analysis of prosthesis, orthodontic or orthopedic appliances and filling materials. But these methods has some limitation in analyzing the internal stress. The Finite Element Analysis has been proved to compensate this defect and widely used in this area. The purpose of this study was to compare the stress distributions of the various temporary filling methods being used in pulpotomy procedure. Three different models were designed according to temporary filling material and method: amalgam filling with ZOE base(Model I), amalgam filling with ZPC sub-base and ZOE(Model II), IRM filling only(Model III). The results of the experiment were as follows: 1. In model I under the load case 6 and 1, the significant stress was shown to be concentrated on the buccal portion of crown. 2. Model II showed the similar pattern of stress distribution to Model I. 3. In model III under load case 2, the stress was mainly distributed on the buccal cusp tip and buccal margin of filling material. In same model under the load case 3, the stress was distributed on the lingual cusp tip. 4. Based on the above data, IRM can be assumed to have advantage over the other tested materials in reducing the incidence of crown fracture by localized the stress within the filling materials.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.185-199
• /
• 1999

This study was peformed to investigate the distribution and magnitude of stress at supporting tissue of abutment teeth and residual ridge tissue with remaining unilateral posterior teeth. Four types of removable partial dentures that included clasp retained removable partial denture, attachment retained removable partial denture, telescopic removable partial denture, and swing-lock partial denture were designed, and strain gauge was used for stress analysis. Each prosthesis was subjected to simulated vertical and oblique load. The following conclusions were drawn from this study. 1. The clasp retained removable partial denture generally distributed simulated vertical force more evenly to the supporting structure. 2. The stress at buccal side of 1st premolar was the lowest in swing-lock partial denture and that was highest in attchment retained removable partial denture. The stress at lingual side of 1st premolar was the lowest in telescopic partial denture. 3. In clasp retained removable partial denture, stress was lower at load site and ridge crest at mid-line, but it was higher at 1st premolar area on vertical load. 4. In attachment removable partial denture, stresses at buccal side of 1st premolar. lingual side of 1st premolar on vertical load, and ridge crest at midline on oblique load were higher. 5. In telescopic removable partial denture, stress at lingual side of 1st premolar was the least in all removable partial dentures, but the stress at load site was higher. 6. In swing-lock removable partial denture, stress at buccal side of 1st premolar was the lowest, and stresses at load site and distal end of residual ridge crest were higher.

• Restorative Dentistry and Endodontics
• /
• v.1 no.1
• /
• pp.18-25
• /
• 1975

The author has experienced 8 cases of periapical lesion which were very closed to adjacent root tip. To avoid damage on neighboring nerve and blood supply polyvinyl tube was inserted through buccal window leaving a little pathological changes in involved area. The results are as follows: 1. The purpose to maintain adjacent tooth vitality was achieved by means of intubation in the lesion. 2. Swelling and pain after operation was rather lesser than routine apical surgery, because of drainage. 3. The total treatment period seems longer than that of routine apical amputation.