• Title/Summary/Keyword: Buccal

Search Result 1,237, Processing Time 0.033 seconds

Saffron Reduction of 7,12-Dimethylbenz[a]anthracene-induced Hamster Buccal Pouch Carcinogenesis

  • Manoharan, Shanmugam;Wani, Shamsul Afaq;Vasudevan, Krishnamoorthy;Manimaran, Asokan;Prabhakar, Murugaraj Manoj;Karthikeyan, Sekar;Rajasekaran, Duraisamy
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.14 no.2
    • /
    • pp.951-957
    • /
    • 2013
  • Our aim was to investigate the chemopreventive potential of saffron in DMBA-induced hamster buccal pouch carcinogenesis. Assessment was by monitoring the percentage of tumor bearing hamsters, tumor size as well as the status of detoxification agents, lipid peroxidation and antioxidants. Oral squamous cell carcinomas were induced in the buccal pouch of Syrian golden hamsters by painting them with 0.5% DMBA in liquid paraffin three times a week for 14 weeks. We observed 100% oral tumor formation with severe histopathological abnormalities in all the hamsters treated with DMBA alone, activities of phase I and phase II detoxification enzymes, lipid peroxidation and antioxidants being significantly altered. Though oral administration of saffron completely prevented the formation of tumors, we noticed severe hyperplasia and dysplasia in hamsters treated with DMBA, suggesting that tumors might eventually develop. Oral administration of saffron return detoxification enzymes, lipid peroxidation and antioxidants to normal ranges. The chemopreventive potential of saffron thus is likely due to antioxidant properties and modulating effects on detoxification in favour of the excretion of carcinogenic metabolites during DMBA-induced hamster buccal pouch carcinogenesis.

Both buccal mucosa transposition flap for reconstruction of lower lip near-total mucosal defect (아래 입술 점막 전체 결손의 재건을 위한 양측 볼점막 자리 옮김 피판술)

  • Park, Bo Young;Kang, So Ra;Kim, Yang Woo
    • Archives of Plastic Surgery
    • /
    • v.36 no.1
    • /
    • pp.109-112
    • /
    • 2009
  • Purpose: Squamous cell carcinoma(SCC) of the lower lip is the most common malignant tumor comprising 90% of all lip SCC. The typical picture of SCC of the lower lip is of an ulcerated lesion with raised margins. Surgery is the treatment of choice for SCC of lower lip. Depending on the location and size of the tumor, different types of flaps are used. We used new method - 'both buccal mucosa transposition flap' for the reconstruction of the near total mucosal defect of the lower lip. Methods: This 67 - year - old men presented with the crusted $1cm{\times}1cm$ sized ulceration of the lower lip that was arised 30 years ago. There were no size and color change, except the bleeding and ulceration. At first, We diagnosed the SCC through the incisinal biopsy. Then We performed the wide excision of the tumor and reconstruction of the lower lip. After the excision of the whole tumor, the defect was measured at $8cm{\times}3.5cm$. We designed the buccal mucosa transposition flap taking care to avoid the parotid duct. The flap was made in a triangular shape for the reconstruction of defected lower lip. The donor site defect can be sutured primarily. Results: A patient in this study had no postoperative complications such as necrosis, dehiscence, infection of the flap or donor site. Reconstructed lower lip is relatively close to that of the natural lip; More satisfactory aesthetic and functional results can be obtained by using this technique rather than other techniques. Conclusion: 'Both buccal mucosa transposition flap' is reliable method for the reconstruction of the large lower lip mucosal defect. The operation is simple and performed in one stage, with no postoperative complications. This technique can offer consistently good functional and esthetic outcomes after reconstruction of lower lip mucosal defect.

A Clinical Comparision of Nonresorbable and Resorbable Membrane in the Treatment of Human Class II Furcation Defects (II급 치근이개부병변에서 비흡수성막과 흡수성막을 이용한 조직유도재생술의 임상적 비교)

  • Jang, Chae-Yun;Lee, Jae-Mok;Suh, Jo-Young
    • Journal of Periodontal and Implant Science
    • /
    • v.31 no.4
    • /
    • pp.689-711
    • /
    • 2001
  • The purpose of this study was to compare clinical results of guided tissue regeneration(GTR) using either a nonresorbable ePTFE membrane or a resorbable membrane made from a synthetic copolymer of glycolide and lactide(PLGA) in the treatment of human class Ⅱ furcation defects. The ePTEE membranes were applied to 16 patients with maxillary molar buccal class Ⅱ furcation defects as Group I, PLGA membranes were applied to 15 patients with maxillary molar buccal class Ⅱ furcation defects as Group Ⅱ, ePTFE membranes were applied to 20 patients with mandibular molar buccal class Ⅱ furcation defects as Group Ⅲ and PLGA membranes were applied to 20 patients with mandibular molar buccal class Ⅱ furcation defects as Group Ⅳ and bone graft materials(DFDBA) were applied in all groups. Probing depth, gingival recession, clinical attachment level, tooth mobility and sulcus bleeding index(SBI) were measured at baseline, 3, 6 and 12months postoperatively. In addition, membrane exposure levels were measured at surgery, 1, 2 and 6weeks postoperatively and postoperative complications were evaluated. The results were as follows: In all groups, there were statistically significant differences in probing depth reduction, gain of clinical attachment and mobility reduction at values of 3, 6 and 12months postoperatively compared to values of baseline, whereas no significant differences in SBI except Group I and gingival recession(p<0.05). Membrane exposure levels were increased at 1, 2 and 6weeks postopratively compared to value of baseline in Group I(p<0.05). There were no statistically significant differences between ePTFE and PLGA membrane in probing depth, clinical attachment level and SBI. There were minimal gingival recession and membrane exposure in Group Ⅳ and pain and swelling were the most common postoperative complications in Group Ⅱ, Ⅲ(p<0.05). In conclusion, this study showed that both nonresorbable membrane and resorbable membrane were effective similarly in the treatment of class Ⅱ furcation defects, without statistical differences in clinical measurements.

  • PDF

TREATMENT OF PALATAL ABSCESS OF ODONTOGENIC ORIGIN IN CHILDREN: CASE REPORTS (소아에서 발생한 치성 기원 구개 농양의 치험례)

  • Ryu, Jae-Ryang;Kim, Young-Jin;Kim, Hyun-Jung;Nam, Soon-Hyeun
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.38 no.4
    • /
    • pp.421-426
    • /
    • 2011
  • Most of the intraoral infections origin in odontogenic infection. Odontogenic infection spreads out along the least resistant path. In maxilla, the thickness between periapical area and cortical bone is narrower on the buccal side than the palatal side. So infection usually spreads out along the buccal side rather than the palatal side. The failure of root canal treatment more frequently occurs on the buccal root compared to the palatal root. So the palatal abscess is rarer than the buccal abscess. It is difficult to differential diagnosis palatal abscess from salivary gland tumors, benign neural tumors and cysts on the palate. Therefore, when the palatal swelling is observed in children, you need to prevent the systemic spread of infection by early diagnosis of the odontogenic palatal abscess. In these cases, the patient who complained of the pain in deciduous teeth and the palatal swelling was diagnosed with odontogenic palatal abscess. The patient was treated with extraction and antibiotic medication. The palatal abscess was resolved, and we report after treatments.

Finite element analysis of stress distribution on supporting bone of cement retained implant by loading location (하중 위치에 따른 시멘트 유지형 임플란트 지지골의 유한요소법 응력 분석)

  • Kim, Kap-Jin
    • Journal of Technologic Dentistry
    • /
    • v.38 no.3
    • /
    • pp.143-149
    • /
    • 2016
  • Purpose: The purpose of this study is to evaluate the effect of two different oblique mechanical loading to occlusal surfaces of cement retained implant on the stress distributions in surrounding bone, using 3-dimensional finite element method. Methods: A 3-dimensional finite element model of a cement retained implant composed of three unit implants, simplified ceramic crown and supporting bone was developed according to the design of ement retained implant for this study. two kinds of surface distributed oblique loads(100 N) are applied to following occlusal surfaces in the single crowns; 1) oblique load on 2 occlusal points(50N for each buccal cusp, 2 buccal cusps exist), 2) oblique load on 4 occlusal points(25N for each buccal and lingual cusp, 2 buccal and 2 lingual cusps exist) Results: The results of the comparison of the stress distributions on surrounding bone are as follows. In the condition of oblique load on 2 occlusal points, VMS was 741.3 Mpa in the M1(Ø$4.0{\times}13mm$) model and 251.2 Mpa in the M2(Ø$5.0{\times}13mm$) model. It means the stress on the supporting bone is decreased. The results of oblique load on 4 occlusal points are similar to this one. Conclusion: Increasing the diameter of the implant fixture is helpful to distribute the stress on the supporting bone. Also, to obtain the structural stability of the supporting bone, it is effective to distribute the load evenly on the occlusal surface of crown in producing single crown implant.

Evaluation of the Lip during Smile in Normal Occlusion Adults (정상교합자의 미소시 구순 형태에 관한 연구)

  • Chi, Kuk-Sop;Kim, Kwang-Won
    • The korean journal of orthodontics
    • /
    • v.26 no.2 s.55
    • /
    • pp.197-204
    • /
    • 1996
  • This study was performed to mark the criteria of the eathetic smile that was necessary to improve the esthetic problem in oral maxillo-facial region. The facial straight photographs of 62 adults(30 males, 32 females : 19-24 years old) in resting position and during smile were taken. The measurements and proportion of lip-teeth relationship during smile were statistically analyzed with photogrammetry. The following results wow obtained : 1. In the evaluation of the change of lips, smile line ratio was 0.93, buccal corridor ratio was 0.63, and smile symmetry ratio was 0.96. 2. The width of mouth during smile was 1.31 times of the width inthe resting position and 0.48 times of face width. 3. The upper lip height during smile was 0.69 times of the height in the resting position and the lower lip height during smile was 0.93 times of the height in the resting position. 4. The mean exposed lenght of upper central incisor was 9.96mm. Maxillary incisor exposure was significantly correlated with the upper lip change ratio, mouth width change ratio, and buccal corridor ratio.

  • PDF

The effect of different radiographic parameters on the height, width and visibility of cross-sectional image of mandible in spiral tomography (나선형 단층방사선사진촬영에서 촬영조건이 악골 단면상의 높이, 폭 및 인지도에 미치는 영향)

  • Lee Tae-Wan;Han Won-Jeong;Kim Eun-Kyung
    • Imaging Science in Dentistry
    • /
    • v.33 no.1
    • /
    • pp.43-49
    • /
    • 2003
  • Purpose : To evaluate the differences in bone height, bone width, and visibility of posterior spiral tomographic images according to various exposure directions, image layer thickness, and inclination of the mandibular inferior border. Materials and Methods: Six partially and completely edentulous dry mandibles were radiographed using Scanora spiral tomography. Spiral tomography was performed at different exposure directions (dentotangential and maxillotangential projection), image layer thicknesses (2 mm, 4 mm and 8 mm), and at various inclinations to the mandibular border (+ 100, 00 and -10°). The bone height and width was measured using selected tomographic images. The visibility of mandibular canal, crestal bone, and buccal and lingual surfaces were graded as 0, 1, or 2. Results : The bone width at the maxillo-tangential projection was wider than at the dento-tangential projection (p < 0.05). The visibility of buccal and lingual surface at the maxillo-tangential projection was higher than at the dento-tangential projection (p<0.05). Thinner image layer thicknesses resulted in greater visibility of buccal and lingual surfaces (p < 0.05). Bone height was greatest in the -10° group, and at the same time the bone width of the same group was the narrowest (p < 0.05). The visibility of alveolar crest and buccal surface of the + 10° group was the highest, while the visibility of the mandibular canal was greatest in the 00 group. Conclusion: When spiral tomography is performed at the mandibular posterior portion for visualization prior to implant surgery, it is important that the inferior border of mandible be positioned as parallel as possible to the floor. A greater improvement of visibility can be achieved by maintaining a thin image layer thickness when performing spiral tomography.

  • PDF

The effect of periodontal therapy on the gingival thickness in patients with drug-induced gingival enlargement (치주치료가 약물성 치은비대 환자의 치은두께에 미치는 효과에 관한 연구)

  • Kim, Won-Kyung;Baek, Jin;Lee, Young-Kyoo
    • Journal of Periodontal and Implant Science
    • /
    • v.35 no.4
    • /
    • pp.1109-1116
    • /
    • 2005
  • The purpose of this study was to observe the effects of periodontal therapy, including nonsurgical periodontal therapy with azithromycin, surgical therapy, and maintenace therapy on the drug-induced gingival enlargement, by means of measuring gingival thickness. The test group of 18 patients with drug-induced gingival enlargement received scaling, root planing with azithromycin for 5 days, with or without surgical periodontal treatment. The control group of 18 patients who had not taken any medication, received scaling and root planing, with or without surgical periodontal treatment. Both groups received supportive periodontal therapy every 3 months for 2 years. The mean period of total treatment is 32 months in the test group and 31 months in the control group. The thickness of the buccal gingiva was measured using an ultrasonic device of $SDM^{(R)}$(Krupp Corp., Essen, Germany). The results revealed that the test $group(1.21{\pm}0.51mm)$ showed statistically thicker buccal gingiva than the control $group(1.01{\pm}0.3mm)$. In the test group, the buccal gingiva was thickest on 2nd molars and was thinnest on canines of both dental arches. In the control group, the buccal gingiva was thickest on central incisors in the maxilla and 2nd molars in the mandible, while the thinnest areas were on canines in the maxilla and 1st premolars in the mandible. It would be concluded that the periodontal treatment with azithromycin aids in decreasing the degree of the gingival enlargement but cannot prevent the recurrence completely.

Per-oral cross-facial sural nerve graft for facial reanimation

  • Jeong, Joohee;Almansoori, Akram Abdo;Park, Hyun-Soo;Byun, Soo-Hwan;Min, Seung-Ki;Choung, Han-Wool;Park, Joo Yong;Choi, Sung Weon;Kim, Bongju;Kim, Soung-Min;Lee, Jong-Ho
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.40
    • /
    • pp.22.1-22.4
    • /
    • 2018
  • Background: Cross-facial nerve graft is considered the treatment of choice for facial reanimation in patients with unilateral facial palsy caused by central facial nerve damage. In most cases, a traditional parotidectomy skin incision is used to locate the buccal and zygomatic branches of the facial nerve. Methods: In this study, cross-facial nerve graft with the sural nerve was planned for three patients with facial palsy through an intraoral approach. Results: An incision was made on the buccal cheek mucosa, and the dissection was performed to locate the buccal branch of the facial nerve. The parotid papillae and parotid duct were used as anatomic landmarks to locate the buccal branch. Conclusions: The intraoral approach is more advantageous than the conventional extraoral approach because of clear anatomic marker (parotid papilla), invisible postoperative scar, reduced tissue damage from dissection, and reduced operating time.

OSTEOGENESIS BY BMP-2 IN ADULT STEM CELL DERIVED FROM BUCCAL FAT PAD (BMP-2에 의한 협부 지방 성체 줄기세포의 골형성)

  • Kim, Chang-Hyen;Park, Cheol-Hun;Lee, Il-Kyu;Pyo, Sung-Woon
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.34 no.4
    • /
    • pp.412-418
    • /
    • 2008
  • Bone morphogenetic proteins (BMPs) in combination with stem cells gain more significance for their use in bone tissue engineering. The mesenchymal stem cell can be differentiated into osteoblast by the treatment of BMP. The aim of this study is to characterize the osteogenic differentiation process of adult stem cells derived from buccal fat pad according to BMP-2 within culture media and decide the appropriate concentration of BMP-2 to facilitate osteogenesis. The authors procured the stem cell from buccal fat pad and analyzed for presence of stem cell by flow cytomety against CD-34, CD-105 and STRO-1. The buccal fat derived stem cells (BFDC) were treated by application of the different concentration with BMP-2 of 0, 10, 50, 100 and 200ng/ml, respectively. And their ability to differentiate into osteogenic pathway were checked by alkaline phosphatase(ALP) staining, Alizarin red staining and RT-PCR for osteocalcin(OC) gene expression at 7, 14 and 21day of culture. Flow cytometric analysis and biochemical assays demonstrated that BFDC might be a distinguished stem cells, and mineralization was accompanied in proportion to BMP-2 concentration. However, with 100ng/ml concentration of BMP-2, the BFDC demonstrated most efficient staining pattern of ALP and Alizarin red. The feasibility of the osteogenic differentiation in the group of both 50ng/ml and 200ng/ml of BMP-2 showed similar activity and relatively weaker than that of 100ng/ml. These results suggest that the BMP-2 stimulate osteogenesis by BFDC effectively and that bone induction might be controlled through negative regulatory feedback in higher concentration.