• 한국전자파학회논문지
• /
• 제26권3호
• /
• pp.342-348
• /
• 2015

본 논문에서는 펄스 모드 발진기와 지연선로를 이용하여 새로운 감지 형태를 갖는 버블형 동작감지기를 제안하고, 설계 및 제작하였다. 제안된 동작감지기는 송신 신호의 펄스폭으로 버블 형태의 감지 영역을 형성하며, 지연선로에 의해 시간 지연되는 거리에 해당하는 물체에서 반사된 신호만을 감지하여 IF 신호를 만들어낸다. 제작된 동작감지기는 중심주파수 8 GHz, 펄스 폭 2 nsec, 펄스 주기 30 nsec를 갖는 펄스 모드 발진기를 신호원으로 사용하였으며, 7 nsec와 12 nsec의 지연 시간을 갖는 선로 2개를 사용하여 1 m, 3 m, 5 m의 위치에 버블막 형태의 감지 영역을 성공적으로 형성하여 물체를 감지하였다.

• 한국해양공학회지
• /
• 제32권1호
• /
• pp.28-35
• /
• 2018

An analytical method for predicting the velocity potential around a pulsating bubble close to a free or rigid wall was established using an image method. Because the velocity potential should satisfy two boundary conditions at the bubble surface and rigid wall, we investigated the velocity in the normal direction at the two boundaries by adding the image bubbles. The potential was analyzed by decomposing the bubble motion as two independent motions, pulsation and translation, and we found that when the number of image bubbles was greater than ten, the two boundary conditions were satisfied for the translation term. By adding many image bubbles after the approximation of the pulsation term, we also confirmed that the boundary condition at the wall was satisfied.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1503-1506
• /
• 2009

Bubble jet loop heat pipe is a newly devised variation of heat pipe in which heat is effectively transported by the latent heat of evaporation and condensation as well as the heat capacity of circulating working fluid. The circulatory and oscillating motion of the working fluid becomes possible by the motion of bubble jet which is generated at a narrow circular gap. These bubbles are condensed at the condensing section. Bubble jet loop heat pipe makes it possible to carry heat long distances upward and horizontal directions. Because Its structure is a very simple and a low cost, it is available for the floor heating, vinyl house heating, the defrosting of heat pump system and home refrigerator.

• The Journal of the Acoustical Society of Korea
• /
• 제28권1E호
• /
• pp.1-8
• /
• 2009

Primary radiation force on ultrasound contrast agents (UCA) in a propagating and standing acoustic field was explored. A specific ultrasound contrast agent $Albunex^{(R)}$ and $Optison^{(R)}$ were chosen for simulation. The model was developed based on a shelled bubble model proposed by Church. The numerical simulation suggests that bubble translational motion is more significant in therapeutic ultrasound due to higher intensity and long pulse duration. Even a single cycle of a propagating wave of 4 MPa at 1 MHz can cause a bubble translational motion of greater than $1{\mu}m$ which is approximately one tenth of capillary. Hence, UCA characteristics can be significantly changed in therapeutic ultrasound without rapid bubble collapses.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.389-396
• /
• 2001

Direct numerical simulation of bubble growth and merger process on a single nucleation site during partial nucleate boiling is performed. The equations governing conservation of mass, momentum and energy are solved using a finite difference method combined with a level set method for capturing the vapor-liquid interface. The level set method is modified to include the effects of phase change at the interface and contact angle at the wall. Also, a simplified formulation for predicting the evaporative heat flux in a thin liquid micro-layer is developed and incorporated into the level set formulation. Based on the numerical results, the bubble growth and merger pattern and its effect on the heat transfer are discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1891-1896
• /
• 2003

The bubble motion during nucleate boiling in a microchannel is investigated numerically. The liquid-vapor interface is tracked by a level set method which is modified to include the effects of phase change at the interface and contact angle at the wall. The computations are made for various channel sizes, liquid flow rates, and contact angles. Based on the numerical results, the bubble growth pattern and its effect on the flow and heat transfer are discussed.

• Korean Journal of Mathematics
• /
• 제20권3호
• /
• pp.323-331
• /
• 2012

We present a high-order potential ow model for the motion of the impulsively accelerated unstable interface of infinite density jump. The Layzer model for the evolution of the interface is extended to high-order. The time-evolution solutions of the bubble and the spike in the interface are obtained from the high-order model. We show that the high-order model gives improvement on the prediction of the evolution of the bubble and the spike.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.353-356
• /
• 2006

A set of solutions of the Navier-Stokes equation for the gas inside a spherical bubble with heat transfer through the bubble wall permits to predict correctly behavior of an ultrasonically driven bubble in aqueous solutions of sulfuric acid. Calculation results of the minimum velocity of bubble wall and the peak temperature and pressure are in excellent agreement with the observed ones. Further the calculated bubble radius-time curve displays alternating pattern of bubble motion as observed in experiment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.341-346
• /
• 2004

Motion of a bubble inside narrow tube is numerically studied. The numerical code assumes axi-symmetric incompressible flow field. The surface of the bubble is captured by VOF (Volume Of Fluid) method, and it is advected by MARS (Multiphase Advection and Reconstruction Scheme). Air bubble inside water is first studied, and it was found that a strong vortex, which is induced by the pressure difference caused by the surface tension, is formed at the rear part of the bubble. Then flow parameters are parametrically varied to understand the correlation between the bubble shape, the bubble velocity, and the flow parameters. The parametric study revealed that the aspect ratio of the bubble mainly depends on We number, and the oscillation of the bubble speeds is dependent on Re number.

• 대한기계학회논문집B
• /
• 제41권7호
• /
• pp.463-468
• /
• 2017

경피를 통한 약물 전달 방식에 있어, 본 연구에서 제안하고 있는 바늘 없는 주사기 시스템은 레이저와 마이크로젯 인젝터로 구성 되어 있다. 이때 마이크로젯 인젝터의 핵심 메커니즘은 레이저 유도버블이다. 동력원으로 Nd:YAG와 Er:YAG, 두 종류의 레이저가 사용되었다. 버블의 특성을 결정짓는 레이저 변수인 펄스폭, 파장 등이 본 연구에서 고려되었다. Nd:YAG 레이저의 경우에 펄스폭이 버블의 생존 시간보다 짧기 때문에 캐비테이션에 가까운 버블을 형성하는 반면 Er:YAG 레이저의 경우에 펄스폭이 상대적으로 길고 물에서의 흡수가 잘 되기 때문에 보일링 버블이 만들게 된다. 버블 및 마이크로젯의 자세한 움직임은 초고속 카메라를 통해 촬영되었다. 이와 같은 과정을 통하여 마이크로젯의 특성이 버블에 의해 결정되는 것을 본 연구를 통해 관찰되었다. 약물 전달 성능은 기니어피그 조직에 형광물질을 침투한 결과로 부터 분석하였다.