• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.513-513
• /
• 2009

최근 바이오디젤의 원료로 미세조류가 많은 관심을 끌고 있다. 미세조류는 물, 이산화탄소와 태양광을 이용해 광합성 성장이 가능하며, 지질(오일) 성분이 풍부하여 바이오디젤의 원료로 이용할 수 있다. 미세조류는 단위 면적당 오일 생산량이 곡물류의 50-100배 이상이며, 이산화탄소를 기질로 이용하므로 온실가스 직접 저감이 가능하다. 또한 배양시 비경작지나 황무지를 사용할 수 있으므로 기존 식용작물과 경쟁하지 않으며, 하수, 해수, 폐수 등 다양한 물자원을 이용할 수 있다. 본 연구에서는 고농도 $CO_2$에 내성을 지닌 Chlorella sp. KR-1을 대상으로 1 L 규모 기포탑 광생물반응기에서 균체 성장 및 지질(바이오오일) 합성에 대한 $CO_2$ 농도, 가스 공급속도, 질산염 농도 등 환경 및 영향 조건의 영향을 조사하였다. 가스 공급속도 0.4 L/min에서 $CO_2$ 농도를 0.03-20% 범위에서 조사하였을 때 최대 균체성장은 $CO_2$ 10%에서 관찰되었다. 균체내 지방산 함량은 $CO_2$ 농도 0.03%에서 가장 낮았고, 5-20% 범위에서는 $CO_2$ 농도 증가에 따라 감소하는 경향이 관찰되었다. 가스 공급속도를 0.2 L/min에서 0.8 L/min으로 증가시켰을 때 최대 균체농도는 0.6-0.8 L/min의 범위에서 관찰되었고, 생체내 최대 지방산 함량은 0.4 L/min에서 관찰되었다. Nitrate 농도 1-20 mM 범위에서 최종 균체농도는 nitrate 농도 증가에 따라 10mM까지 증가하였으나 그 이상에서는 증가하지 않았다. 반면 지방산 함량은 nitrate 농도 증가에 따라 감소하는 경향이 관찰되었다. 본 실험에서 얻은 최대 지방산 생산량은 1,100 mg/L이었으며, 주요 지방산은 C10:0(1.7%), C16:0(28.5%), C18:0(11%), C18:1n9c(25.9%), C18:2n6c(26.3%), C18:3n3(6.6%)이었다. 현재 100 L 규모 광생물반응기에서 석탄발전소 배가스($CO_2$ 12-15%, SOx 50ppm, NOx 100ppm)를 이용한 바이오오일 생산 실험이 진행 중이다.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.323-328
• /
• 2016

Pressurized membrane used for side-stream MBR process requires fouling control strategy both for normal and abnormal operation conditions for stable operation of the facilities. In this study, $85m^3/day$ of pilot-scale side-stream MBR process was constructed for the evaluation of fouling mitigation by air bubble injection into the membrane module. In addition, fouling phenomena at abnormal operation conditions of low influent and/or loading rate were also investigated. Injection of air bubble was found to be effective in delaying transmembrane pressure (TMP) increase mainly due to scouring effect on the membrane surface, resulting in expanded filtration cycle at a high flux of $40L/m^2{\cdot}h$ (LMH). At abnormal operation condition, injection of PACl (53 mg/L as Al) into the bioreactor showed 19% reduction of TMP increase. However, inhibition of nitrifying bacteria by continuous PACl injection was observed from batch experiments. In contrast, injection of powdered activated carbon (PAC, 0.6 g/L) was able to maintain the initial TMP of $0.2kg/cm^2$ for 5 days at the abnormal conditions. It may have been caused from the adsorption of extracellular polymeric substances (EPS), which was known to be excessively released during growth inhibition condition and act as the major foulants in MBR operations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.199-199
• /
• 2019

친환경적인 산업기술인 초미세기포(Ultra Fine Bubble, 이하 UFB) 제조 기술은 농업, 수처리, 그리고 환경재생 등 다양한 분야에서 적용되고 있다. UFB는 1,000nm 이하의 크기를 가진 기포로서 용존산소를 통한 농작물 성장 촉진 및 수중의 대장균 및 세균제거 등 다양한 성질을 지니고 있다. 본 연구는 기존의 방식과는 다르게 자왜현상을 메카니즘으로 갖는 타격식으로 제조된 UFB 생성장치를 통해 생성된 200nm이하의 크기를 가진 UFB를 실제 딸기 농장에 적용하여 딸기의 성장을 모니터링하고 살균 성능을 가진 화학제품과 UFB를 대장균에 적용하여 대장균 제거효율을 비교하였다. 딸기농장에 기존에 사용되던 지하수 대신 UFB를 주입하여 딸기성장 초기단계의 DO농도를 측정하고 딸기 생식단계에 산소포화도에 대한 질산염의 농도를 측정하여 상관관계를 분석하였으며 각각의 딸기 열매를 수확하여 무게를 비교하였다. 또한 대장균이 함유되어있는 대변을 채취하여 살균 성능을 가진 화학제품과 UFB수를 각각 대장균이 포함된 실험원수와 반응시켜 배양하고 검출된 대장균 개체 수에 확인하여 제거효율을 비교분석 하였다. 딸기성장 초기단계의 DO농도 측정결과 DO농도가 6~9ml/L로 높게 유지되고 있음을 확인하였고 딸기 생식단계에서 산소포화도가 일정하게 유지되고 있음에 따라 질산염의 농도가 점차 감소하는 것을 확인하였다. 또한 수확한 열매의 무게는 각각 37g, 19g으로 UFB수를 통해 재배된 딸기가 약 2배 이상 높은 것으로 나타났다. 이와 같은 결과는 수중의 용존산소가 딸기 성장 초기에 뿌리의 발육에 긍정적인 영향을 미치고 질산염을 원활하게 섭취하게 하여 딸기의 성장이 촉진되었고 열매의 무게가 증가하였다고 판단된다. 또한 대장균이 함유된 원수, 원수+화학제품, 원수+UFB를 접종하여 대장균과 반응시켜 배양하여 대장균 개체 수를 확인한 결과, 원수의 경우 약 600개의 대장균의 개체수가 나타났고, 원수+화학제품의 경우 검출된 대장균의 개체 수는 약 300개 정도로 나타났다. 이를 희석한 비율을 계산하여 대장균 개체 수를 나타내면 원수 약 6000개/ml, 원수+화학제품 약 6000개/ml로 비슷하게 나타난다. 반면, 원수+UFB 경우 검출된 대장균의 개체 수는 1개로 희석한 비율을 계산하여 대장균 개체 수를 나타내면 약 20개/ml로 나타난다. 이와 같은 결과를 통해 UFB는 99.9%의 대장균 제거효율을 보였으며, 화학제품은 대장균 제거효율을 보이지 않았다. 따라서 화학제품은 항균기능은 작용하지만 살균기능은 거의 없다고 판단하였고, UFB의 경우 기포가 소멸하면서 발생되는 초고온, 초고압을 형성하여 주변에 존재하는 대장균을 제거하였거나, 기포가 소멸할 때 발생되는 OH 라디칼을 통해 대장균의 세포를 화학적으로 분해시켜 대장균을 제거하였다고 보인다.

• Journal of Marine Bioscience and Biotechnology
• /
• v.15 no.2
• /
• pp.41-48
• /
• 2023

The objective of the present study was to improve the biomass productivity of newly isolated freshwater green microalga Parachlorella sp. This was accomplished by culture conditions optimization, including CO₂ concentration, superficial gas velocity, and light intensity, in 0.5 L bubble column photobioreactors. The supplied CO₂ concentration and gas velocity varied from 0.032% (air) to 10% and 0.02 m/s - 0.11 m/s, respectively, to evaluate their effects on growth kinetics. Next, to maximize the production rate of Parachlorella sp., a lumostatic operation based on a specific light uptake rate (q_e) was applied. From these results, the optimal CO₂ concentration in the supplied gas and the gas velocity were determined to be 5% and 0.064 m/s, respectively. For the lumostatic operation at 10.2 µmol/g/s, biomass productivity and photon yield showed significant increases of 83% and 66%, respectively, relative to cultures under constant light intensity. These results indicate that the biomass productivity of Parachlorella sp. can be improved by optimizing gas properties and light control as cell concentrations vary over time.

• Journal of Korean Academy of Nursing
• /
• v.3 no.1
• /
• pp.41-51
• /
• 1972

In this article, the writer attempted to study the followings: (1) mother's knowledge of milk feeding (including method of sterilization, formula and feeding) (2) reasons of artificial feeding (3) how much mothers are concerned about their artificial feeding infants (4) condition of growth and development of artificial feeding infants. As the object of study, 96 mothers with artificial feeding infants, who had consulted dep't of pediatrics of two Hospitals in Seoul (Korea Hospital and Med. College Woo Suk Hospital, Korea Uni.) and well baby clinic of the two Health Centers (Sung Dong and Dongdaemoon), were randomly sampled. The data were treated by the statistic method of chi-square and percentage, and come to the following conclusion. 1. Knowledge of milk feeding Sterilization: 70 percentages of mothers know about the milk sterilization (including bottle, nipple and instrument), but 55 percentages of them do not know the nipple sterilization correctly. Formula: 69 percentages of mothers follow the indicator or in accordance with doctor's directions, but 31 percentages do at their option by reasons that the baby often coughs up the milk, the baby is too small, the baby often has digestive troubles, or the baby grow fleshy heavily etc, except family economic problems. Feeding: only half of mothers know the correct feeding method, especially they do not know how to determine the heat degree of milk and how to bubble up the baby correctly. They just do feeding according to the accepted usages. 2. Reasons of artificial feeding Of the reasons of artificial feeding, 18 percentages were caused by infants and 82 percentages by mothers. Most of the reasons are mainly due to the lack of breast milk and sufficient supply of nourishments rather than mother's deficiency or mother's abnormality. 3. Mother's concern for artificial feeding infants Mothers who are sharply concerned for their artificial feeding baby's growth and development: 63%, mothers who made the baby (artificial feeding infant) routine vaccinated: 81%, mothers who ear anxious about the baby's future personality forming : 68%, mothers who care about the baby's condition of nourishment; 60%, mothers who are anxious about tile selection of baby's food; 54%. 4. The growth and development of artificial feeding infants compared with Korean average infants. The artificial feeding infants are above the Korean average infants in stature by 1.21 centimeters and in weight by 0.3 kilograms. Conclusion: It has been said that there is no better food for infant than the breast milk. However, the artificial feeding has been used for the supplement of nourishments and as substitute food for the breast milk. And this artificial feeding could give the married women the chance to act in society and more opportunity to develop themselves and to work for others at home and other fields. Considering these advantages, artificial feeding should not be exclusive, but preferably should be more improved and inquired positively. And even in artificial feeding, what is most important is that mothers should recognize the requirement and need of artificial feeding clearly and correctly, and they should be accustomed to the correct knowledge and skills of artificial feeding in order to practice it appropriately. In some degree, they should be properly trained in school education process.

• Journal of Marine Bioscience and Biotechnology
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2022

This study examined the growth, fatty acid (FA) content, and carotenoids of a newly isolated freshwater microalga, Mychonastes sp. 246, in various culture media. The appropriate temperature and light intensity for culturing Mychonastes sp. 246 were determined as 18℃-22℃ and 200-250 µmol/m²/s using a high throughput photobioreactor. The microalgal cells were cultivated in 0.5 L bubble column photobioreactors using BG11, Bold's Basal media, and f/2 media. According to the growth results of the microalgae, BG11, among the tested media, showed the highest biomass concentrations (3.5 ± 0.1 g/L in 10 d). To enhance the biomass growth of the microalgae, the N:P ratio in BG11 was manipulated from 45:1 to 7:1 based on the stoichiometric cell composition. The biomass concentrations of Mychonastes sp. 246 grown on the manipulated BG11 (MBG) increased to 38% (4.6 ± 0.3 g/L in d) compared with the original BG11 (3.3 g/L). The FA content of the microalgae grown on the MBG was lower (8.4%) than that of the original BG11 (10.1%) while the FA compositions did not exhibit any significant differences. Furthermore, three kinds of carotenoids were identified in Mychonastes sp. 246, zeaxanthin, lutein, and β-carotene. These results suggest an effective strategy for increasing biomass concentrations, FA content, and carotenoids of microalgae by performing a simple N:P adjustment in the culture media.

• Journal of Marine Bioscience and Biotechnology
• /
• v.15 no.2
• /
• pp.82-89
• /
• 2023

Microalgae, as photosynthetic organisms, possess the ability to produce a diverse array of bioactive compounds. This study focused on the transformant Chlamydomonas reinhardtii dZL and subjected it to cultivation under varying light intensities (60, 120, 180, and 240 µmol/m²/s). Our aim was to assess the impact of light intensity on both microalgal biomass and carotenoid production. The cultivation took place in 80 mL bubble column photobioreactors, specifically the Multi-cultivator. Notably, the culture exposed to 240 µmol/m²/s exhibited the most rapid cell growth, surpassing even the cell concentration achieved at 180 µmol/m²/s by day 8. A detailed analysis of the specific irradiance rate over time unequivocally revealed a sharp decline in growth rates when the rate fell below 2 × 10^-10 µmol/cell/s. Although the culture with 60 µmol/m²/s yielded the highest carotenoid content (1.2% of dry weight), the culture exposed to 240 µmol/m²/s recorded the highest carotenoid concentration at 8.9 mg/L owing to its higher biomass. Our findings reveal the critical importance of maintaining a specific irradiance rate above 2 × 10^-10 µmol/cell/s to enhance biomass and carotenoid productivity. This study lays the groundwork for defining optimal light intensity conditions applicable to mass culture systems, with the objective of augmenting C. reinhardtii biomass and optimizing carotenoid productivity.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.1
• /
• pp.15-24
• /
• 2017

This research is focused on how the venture-startup policies of South Korea has changed for the last ten years and then scope on its outcomes, limits and suggestions. Several policies for venture-startup has begun when "Small Business Startup Support Law" was developed in 1986. Government's support policies for venture and startup and development of venture had made a turning point in 1997 "Act on Special Measures for the Promotion of Venture Business" and venture companies has achieved remarkable growth with Information Technologies(IT). However, with the global IT bubble and the enrichment of venture companies, a number of venture companies experienced considerable difficulties due to multiple thresholds. There were a lot of efforts to revitalize venture-startup ecosystem such as fostering innovative SMEs and one-person creative enterprise support policy. From 2002 to 2004, Korean Government focused on preventing moral hazards of Korean Venture Business. From 2005 to 2006, It focused on fostering the role of venture capitals, and From 2007 to 2012, Single start-up business has been fostered by government policies. Generally speaking, it can be said that venture-startup policy was emphasized on building the hardware infrastructure of venture-startup and supporting with the funds.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.101-107
• /
• 1998

Carbon dioxide is estimated to be responsible for 60% of the global warming effect, and this percentage is tending upward. Studies on removal and fixation of $CO_2$ in the flue gas are recognized as one of the important roles of the future biotechnology. Photobiological systems have considerably higher photosynthetic efficiency than conventional biomass system. The experiment for the photosynthetic fixation of $CO_2$ and the biomass production was performed with various initial cell concentration in a tubular photobioreactor and a bubble column $CO_2$ contactor with a gas sparger of $CO_2$ -enriched air(0.03~20%). Synechocystis PCC 6803 could grow at 10~20% $CO_2$ content under pH control. The highest specific growth rate, 0.0258 $h^{-1}$ , was obtained at 5% $CO_2$-air mixture. The maximum cell production rate, 0.2784 g/L.day, was obtained when the initial cell concentration was 0.45 g/L at 5% $CO_2$ -air mixture. The maximum cell concentration was 2.03 g/L in the tubular photobioreactor when the light intensity was $45.5{\mu}$ $E/m^2$ . s. This system showed 0.482 g $CO_2$ /L . day of the $CO_2$ fixation.

• Journal of Energy Engineering
• /
• v.2 no.2
• /
• pp.179-186
• /
• 1993

Heat pipes. applied to a flat plate solar collector, have a long and slender configuration with relatively low heat flux in the evaporator section. Such a heat pipe has a tendency to build-up a liquid pool at the lower part of the evaporator section. and at this pool occurs such complicated phenomena of evaporation and fluid dynamics as superheat, sudden generation of bubble, its likely explosive growth process and flooding, etc. In the present study. we tried to solve these problems by means of adjusting two principal design parameters, the liquid inventory and the installation region of the wick, using 4 heat pipes and 3 thermospheres. The corresponding results can be summarized as follows$\^$1)/. The effective thermal conductances of the heat pipe was greatly improved by eliminating the wick in the adiabatic and condenser sections$\^$2)/. The liquid inventory should be increased by about 40% larger than what is saturated the wick$\^$3)/. In the evaporator section the wick has a favorable effect to reduce both unstable operation by intermittent occurrence of nucleate boiling and response time at the initial start-up process.