• 대한전기학회논문지
• /
• 제37권6호
• /
• pp.361-367
• /
• 1988

In this study new design method with auxiliary slot on salient pole is proposed for the reduction of cogging torque which is the problem of corm type DC Brushless motor. And FEM(Finite element method) is adapted in trial motor which is designed by the method proposed in this paper. and learn the quantative characteristics of cogging torque. Comparing results of analysis with measurement it is porved that the proposed design has a propriety.

• 조명전기설비학회논문지
• /
• 제19권4호
• /
• pp.98-107
• /
• 2005

브러시리스 DC 전동기(BLDCM)는 일반적으로 $120[^{\circ}]$ 구형파 전압을 인가하여 구동하며 속도 제어를 위하여 2상 PWM 형태의 펄스로 이를 인가한다. 본 논문은 네 가지 PWM 방법을 이용한 BLDCM 제어 시스템을 소개하고, 2차원 시간차분 유한요소법을 이용하여 각 PWM 방식에 따른 전동기 성능 특성을 해석하고 비교한다. 또한 제안한 해석 기법의 타당성을 입증하기 위하여 BLDCM 시작기를 제작, 실험을 통하여 해석치와 실험치를 비교한다.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1925-1933
• /
• 2017

The brushless DC motor's commutation torque ripple is caused by inconsistency in the rate of phase current change. Thus, a method that considers armature resistance is proposed to modulate phase current. The three-phase control strategy, which involves the "open-phase conduction, off-phase pulse width modulation, and maintained non-commutation phase" technique, is applied during commutation at full-speed segments of the motor. Changes in each phase current are analyzed theoretically by establishing mathematical model based on phase current to determine the relative difference among shutdown phase, duty, and motor operating parameters. The turn-on and turn-off phase current change rates are made to be consistent to ensure less non-commutation phase current ripple, then the torque ripple is inhibited. The simulation results show that the phase commutation current and torque ripple coefficient of the proposed method are reduced from 56.9% and 55.5% to 6.8% and 6.1%, respectively. In the experiment system, the pulsation coefficient of the motor phase current is reduced from 40.0% to 16.7% at low speed and 50.0% to 18.8% at high speed. The simulation and experimental results show that the proposed control method significantly inhibits commutation current and torque in the full section.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.295-303
• /
• 2013

This paper reports an investigation of pulse width modulation (PWM) techniques for two-phase brushless DC (BLDC) motors fed by a two-phase eight-switch inverter in a fan application. The three-phase BLDC motor is widely applied in industry; however, a lower-cost two-phase BLDC motor and drive circuit has been greatly in demand in recent years. In this paper, we introduce a mathematical model of the two-phase BLDC motor with sinusoidal back electromotive forces (EMFs) based on traditional three-phase BLDC motors. To simplify the drive algorithm and speed up its application, we analyze the principle of block commutation for a two-phase BLDC motor drive in the 180-electrical-degree conduction mode, and we further propose five PWM schemes to improve the commutation performance of the two-phase BLDC drive. The effectiveness of the proposed PWM methods is verified through experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.200-204
• /
• 1998

In this paper, a mathematical model of Brushless DC machine fed by pwm inverter is developed. Dynamic and steady state characteristics of Brushless DC motor is simulated and analyzed: electromagnetic torque, speed, phase voltage, and current. In mathematical modeling, the shaft transformation referencing rotor frame from to "a,b,c" three phase frame to "d,g" two phase frame is described.

• Journal of Magnetics
• /
• 제15권1호
• /
• pp.40-44
• /
• 2010

This paper introduces two types of magnetization, and reports the effect of the magnetization direction on the iron loss in a brushless DC (BLDC) motor using a 2-D time-stepped voltage source finite-element method (FEM). The iron losses were found to consist of hysteresis and eddy current loss, which were calculated from the time variation of the magnetic field distribution. To confirm the analysis, a prototype BLDC motor was constructed with a sintered ferrite magnet. The analysis and experimental results suggest that the magnetization direction has a significant effect in terms of the iron loss characteristics of the BLDC motor.

• 전력전자학회논문지
• /
• 제9권5호
• /
• pp.491-497
• /
• 2004

본 논문은 브러시리스직류전동기의 새로운 회전자위치추정 방법에 관한 것이다. 회전자 위치추정이 부정확하게 이루어졌을 때, 역기전력과 상전류 사이의 위상차가 나타나고 이는 다시 전동기의 토크리플을 일으킨다는 사실은 알려져 있다. 이러한 추정오차를 줄이기 위하여 인버터의 정상모드 기간 중에 나타나는 중성점전압을 기반으로 하는 새로운 방법을 제안하고 있다. 이 중성점전압이 효과적인 회전자 위치 추정오차의 한 지표임을 확인하고, 중성점전압의 발생, 획득방법, 보상방법 등을 다루고 있다. 본 알고리즘은 전동기 단자전압센서와 단일 직류링크 전류센서 만을 이용하여 실현할 수 있으며, 관련 시뮬레이션 및 실험결과는 그 타당성을 보여주고 있다.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.173-178
• /
• 2011

In order to verify the performance of brushless DC (BLDC) motors, the simulation method has been widely used. The current of a BLDC motors flows on two phase windings to obtain a constant torque. However, the freewheeling current caused by the inductance component of a BLDC motor exists at the commutation point so that the current can flow on three phase windings at the same time. Due to the changes of the excited phases, the model equations are frequently changed during BLDC motor drive operation. The model equations can be also changed by the applied switching pattern since the current path in the inverter circuit changes according to switching pattern. A BLDC motor system can utilize various switching patterns for many different purposes. However, such changes of the model equations complicate the simulation procedure. In this paper, the technique to set up model equations is proposed to ease the simulation of a BLDC motor system through an inverter circuit analysis. The proposed technique will be verified using the C language. Although this method does not provide the level of detail obtainable from commercial simulation tools like PSIM or SIMULINK, it can provide an efficient way to quickly compare various conditions.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권1호
• /
• pp.1-9
• /
• 2001

In this paper, the general research on the analysis of the vibration due to magnetic exciting force in the small brushless DC(BLDC) motor, which is used in the Digital Versatile Disk(DVD) ROM driving system, is performed. The first part of the study is the analysis of the magnetic exciting force in the air gap region. As a verification of the exciting force by numerical analysis, the magnetic exciting force distribution in the air gap region is computed by using Reluctance Network Method(RNM). In addition, the effect of the eccentricity on the magnetic exciting force is discussed. The other part of the research is the structural analysis of the rotor structure of the BLDC motor. The matural mode analysis of the rotor structure is performed, and the vibration response due to magnetic exciting force is found. As a result of the procedures, the basic estimation of the effect of the magnetic exciting force on the vibration of BLDC motor is suggested.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.170-172
• /
• 2003

Among low power servo applications, classical DC motors are very popular because they are reasonably cheap and easy to control. The main disadvantage is the mechanical collector which has only a limited life period. Also, brush sparking can destroy the rotor coil, generate EMC problems. So permanent magnet brushless do motors and drives are being used increasingly in a wide range of applications. This has been made possible with the advantages of high performance permanent magnets with high coercively and residual magnetic, which make it possible for the PM to have superior power density, torque to inertia ratio and efficiency, when compared to an induction or conventional dc machine. This paper presents the design of a PM brushless dc motor drive simplistically operates as a classical dc motor. The BLDC motor drive system for this paper composes to the power integrated circuits, the one chip device. And several simple semiconductors add to drive system for a motor drive system simplistically operates as a conventional dc motor. Test results confirmed the feasibility of the proposed motor drive system design.