Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Driving Characteristic Analysis of Brushless DC Motor Considering PWM Mode

PWM 모드를 고려한 브러시리스 DC 전동기의 구동 특성 해석

  • Published : 2005.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Brushless DC motor(BLDCM) can be driven by 120[^{\circ}]$ square wave voltage and use PWM pulse patterns in two-phase feeding scheme to control the speed of the motor. This Paper introduces four PWM modes used BLDCM control system, and analyzes their different influences on the motor performances using a time-stepped voltage source finite element method. To verify the proposed computational method, we built the prototype motor for electrical power steering(EPS) and compared the predicted and the measured back EMF and phase current.

브러시리스 DC 전동기(BLDCM)는 일반적으로 $120[^{\circ}]$ 구형파 전압을 인가하여 구동하며 속도 제어를 위하여 2상 PWM 형태의 펄스로 이를 인가한다. 본 논문은 네 가지 PWM 방법을 이용한 BLDCM 제어 시스템을 소개하고, 2차원 시간차분 유한요소법을 이용하여 각 PWM 방식에 따른 전동기 성능 특성을 해석하고 비교한다. 또한 제안한 해석 기법의 타당성을 입증하기 위하여 BLDCM 시작기를 제작, 실험을 통하여 해석치와 실험치를 비교한다.

Keywords

References

  1. T. Kenjo and S. Nagamori, Permanent magnet and brushless DC motors, Sogo Electronics Publishing Company, Tokyo, 1984
  2. J. R. Hendershot Jr. and T. J. E. Miller, Design of brushless permanent-magnet motors, Oxford Science Publication, 1994
  3. Hyeong-Gee Yeo, 'A study on development of sensorless drive system for brushless DC motors,' A Thesis for a Doctor's degree, Korea University, 1998
  4. Zhang Xiangjun, Chen Boshi, 'The different influences of four PWM modes on the commutation torque ripples in sensorless brushless DC motors control system,' Electrical Machines and Systems, ICEMS, Proceedings of the Fifth International Conference, vol. 1, pp.575-578
  5. Dal-Ho Lim, Finite element method of electric field, Dong Myung Sa, 1986
  6. Yon-Do Chun, 'Analysis of eddy current loss and overhang effect in brushless DC motor,' A Thesis for a Doctor's degree, Hanyang University, 2001
  7. S. Ogasawara and H. Akagi, 'An approach to position sensorless drive for brushless dc motors,' IEEE Ind. Applicat., vol. 27, no. 5, pp. 928-933, September/October 1991 https://doi.org/10.1109/28.90349

Cited by

  1. A Study on Optimal Current Control Method for Small BLDC Motor Drive vol.29, pp.4, 2015, https://doi.org/10.5207/JIEIE.2015.29.4.108