• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1041-1042
• /
• 2007

This paper proposes a new method for detecting broken rotor bars in a squirrel-cage induction motor. The air-gap flux variation analysis was done using search coils inserted in stator slots when broken rotor bar occurs. An accurate modeling and analysis of air-gap flux variation in the induction motor are developed using finite-element (FE) software packages, and measurement of the flux are made using search coils. The simulation was done for the induction motor with 380 [V], 7.5 [kW], 4 Poles, 1,760 [rpm] ratings using the commercial FE analysis tool. The simulation and experiment results can be useful for detecting the broken rotor bar of an induction motor.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.981-988
• /
• 2018

An experiment was performed for the OECD/NEA ROSA-2 Project with the large-scale test facility (LSTF), which simulated a steam generator tube rupture (SGTR) accident due to a double-ended guillotine break of one of steam generator (SG) U-tubes with operator recovery actions in a pressurized water reactor. The relief valve of broken SG opened three times after the start of intact SG secondary-side depressurization as the recovery action. Multi-dimensional phenomena specific to the SGTR accident appeared such as significant thermal stratification in a cold leg in broken loop especially during the operation of high-pressure injection (HPI) system. The RELAP5/MOD3.3 code overpredicted the broken SG secondary-side pressure after the start of the intact SG secondary-side depressurization, and failed to calculate the cold leg fluid temperature in broken loop. The combination of the number of the ruptured SG tubes and the HPI system operation difference was found to significantly affect the primary and SG secondary-side pressures through sensitivity analyses with the RELAP5 code.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.422-434
• /
• 2019

Several model-scale tests with a ship model have been performed in the ice tank of the Marine Technology Group in the Aalto University. The ship model of ice going tanker Uikku was mounted rigidly to the main carriage and towed through ice fields. The model tests were performed by changing ice thickness, drift angles and speeds in different ice fields. This paper reports the testing results and different phenomenon during model tests. The measured ice forces are presented and compared to level ice forces. The process of ice forces from broken ice on the ship is also analyzed for some typical tests. The research work could provide guidance on marine structures operating in waters covered by broken ice.

• International Journal of Advanced Culture Technology
• /
• v.8 no.4
• /
• pp.287-293
• /
• 2020

More and more people are paying attention to the psychological pleasure and relaxation that sound hearing brings. In most cases, humans seem to have a special preference for natural sounds. Natural sounds are mainly white noise and pink noise such as wind, rain, waves, waterfall sounds, etc. All of these are often considered to be beneficial to human health, but in reality the same category of natural sounds is no different. It will be very different due to space, time and other factors. Each sound can be unique, so people's hearing experience is also different. This paper quantitatively analyzes the spectrum and brain waves to analyze the feeling of hearing the natural Broken Falls sound. In particular, we aim to objectively analyze the objective feeling of Broken Falls sound falling on the human auditory system through sound spectrum and brain waves.

• Geomechanics and Engineering
• /
• v.19 no.2
• /
• pp.105-114
• /
• 2019

In this paper, simulation tests were conducted with similar materials to study the distribution of residual voids in longwall goaf. Short-time step loading was used to simulate the obvious deformation period in the later stage of arch breeding. Long-time constant loading was used to simulate the rheological stage of the arch forming. The results show that the irregular caving zone is the key area of old goaf for the subsidence control. The evolution process of the stress arch and fracture arch in stope can be divided into two stages: arch breeding stage and arch forming stage. In the arch breeding stage, broken rocks are initially caved and accumulated in the goaf, followed by the step deformation. Arch forming stage is the rheological deformation period of broken rocks. In addition, under the certain loads, the broken rock mass undergoes single sliding deformation and composite crushing deformation. The void of broken rock mass decreases gradually in short-time step loading stage. Under the water lubrication, a secondary sliding deformation occurs, leading to the acceleration of the broken rock mass deformation. Based on above research, the concept of equivalent height of residual voids was proposed, and whose calculation equations were developed. Finally, the conceptual model was verified by the field measurement data.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.366-374
• /
• 2009

To determine the optimum operating conditions of the indented cylinder length grader based on varietal characteristics, broken rice removal capabilities were measured on the milled rice of 41 varieties at different conditions consisted of 3 types of indented cylinders with different indent-opening diameters and 3 different collecting-angles of broken rice. The broken rice removal capabilities were swayed by the indent's opening diameter and depth as well as the angle of the collecting trough of broken rice on the point of instrument, and by the kernel length and width as well as 1000 grain weight of milled rice on the point of rice variety. When the angle of broken rice collecting-trough reached to near the horizontal center line of the indented cylinder on the direction of upward turning side, which was referred $0^{\circ}$ in this paper, the amount of rice collected in trough increased, whereas the loss of head rice also increased. Considering the removal rate of broken rice as well as loss of head rice, it was thought that the suitable angle of trough for broken rice collecting was located $5^{\circ}$ to $15^{\circ}$ depending on varietal characteristic and indent opening diameter. It was thought that 4.2 mm or more of indent opening diameter was recommendable for the rice varieties having heavier 1000 grain weight than 22.3g, as well as larger sizes than 2.9 and 5.2 mm in width and length of rice kernel, respectively; 3.8 mm for the small-sized thin kernels, and a proper diameter between 3.8 and 4.2 mm for short to middle kernels. The varieties with relatively shorter length compared to width of kernel were more difficult to separate the broken rice than the opposite ones. For effective separation of that, it seems that some specific indent shapes such as wider opening and shallow depth etc. are required. When the broken rice content were excessively high, wider diameters of indent openings than specified sizes were thought to be the better.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.525-535
• /
• 2016

This study is to testify the differences between middle school students of normal and broken family and the effect of positive psychological capital on their school life adaptation. The main results are as follows. First, the middle school students of broken family showed lower level in self-efficacy, hope, resilience and optimism (positive psychological capital) than students of normal family. Second, the middle school students of broken family also showed lower level in school adaptation than students of normal family. Third, positive psychological capital was positively correlated with school adaptation in both groups of them. Fourth, self-efficacy, hope and optimism positively influenced school adaptation in students of normal family, only hope of positive psychological capital did it in students of broken family. It seemed that especially hope of positive psychological capital of broken family's students was very important and should be focused in planning and practicing interventions for them. The limitation and future tasks were discussed.

• 재활복지
• /
• v.17 no.4
• /
• pp.291-309
• /
• 2013

Web usability is utilized as a standard for constructing and managing website to be useful by people of all abilities and disabilities. Link integrity is one of main criteria for web usability evaluation. Links that are found to be broken or pointing to irrelevant information lead gradual degradation of link integrity over time. This study has conducted investigation for link integrity of Korean public institution website. Among 49 website that are accessible by an automatic link checker software, 91.8% of the website has more than one broken links. Also average number of broken links is 50.5 that is 0.33% of the number of links. 29 websites consist of internal broken links. And 22 website do not provide any information on the missing page. Broken links enlower website confidence by reducing web usability as well as they prohibit web search engine not to provide information on the website. Therefore, web developers and managers need to be aware of importance of link integrity and prohibit web usability degradation by performing link validation as a web management task or periodically.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.14 no.1
• /
• pp.23-32
• /
• 2007

The nature of genetic variation and diversity among the 65 multivoltine silkworm genotypes was evaluated for 16 post cocoon characters. The components of genetic variation revealed higher PCV (60.487%) and GCV (44.56%) for evenness (variation 1) followed by cohesion (PCV=55.38%, GCV=40.36%) and non-broken filament length (PCV=32.05%, GCV=31.28%). The higher heritability ($h^2$ in broad sense) was observed for boil-off loss (95.6%) followed by non-broken filament length (95.22%). The both genotypic and phenotypic correlation indicated significant positive correlation of filament length with non-broken filament length, silk recovery, raw silk, neatness, and low neatness; and negative correlation with denier, renditta and silk waste. The principal component analysis (PCA) revealed 75.381 % of total variance from the five principal components extracted. On the basis of Mahalonobis' $D^2$ values (Ward's minimum variance), the sixty-five multivoltine silkworm genotypes were classified in to 9 clusters with substantial inter and intra cluster distances. Number of genotypes included in different clusters varied from 3 to 17. The results indicated that the optimum distance obtained in cluster VII (15.059) along with higher cluster mean values especially for filament length, non broken filament length, renditta, silk recovery, silk waste, and raw silk emphasized the utilization of these genotypes in the conventional silkworm breeding programme for improvement of multivoltine silk fibre quality. The possibility of exploiting genetic variation in post cocoon traits for efficient breeding programme is discussed.

• Journal of Biosystems Engineering
• /
• v.23 no.3
• /
• pp.245-252
• /
• 1998

The structural characteristics of a small scale rice polisher was analyzed to improve its performance. Spraying characteristic of nozzles used for rice polishing was also analyzed by a machine vision system. The internal pressure of the polishing chamber was measured according to outlet resistance, water spraying, and roller shaft speed. In addition, the performance of the rice polisher was evaluated to improve it in the basis of internal pressure in polishing chamber, whiteness, and broken rice ratio of clean rice according to the operating conditions. Actual nozzle discharge rate and drop size were 125 cc/min and 86~97 ${\mu}{\textrm}{m}$, respectively. In the case of water spraying on rices, the internal pressure showed 4.9~9.8N/$\textrm{cm}^2$ increase. broken rice ratio decreased, and there was no difference in whiteness. The internal pressure inueased up to two times with the increase of the outlet resistance. Also, the pressure at the upper part of screen was one and half times as high as the pressure at the lower part. In the case of water spraying rate of 150 cc/min, the roller shaft speed of 850 rpm resulted in no difference in whiteness and decrease of 0.3% in broken rice ratio, comparing to the roller shaft speed of 950 rpm.