• ETRI Journal
• /
• v.39 no.5
• /
• pp.672-682
• /
• 2017

Video compression exploits statistical, spatial, and temporal redundancy, as well as transform and quantization. In particular, the transform in a frequency domain plays a major role in energy compaction of spatial domain data into frequency domain data. The high efficient video coding standard uses the type-II discrete cosine transform (DCT-II) and type-VII discrete sine transform (DST-VII) to improve the coding efficiency of residual data. However, the DST-VII is applied only to the Intra $4{\times}4$ residual block because it yields relatively small gains in the larger block than in the $4{\times}4$ block. In this study, after rearranging the data of the residual block, we apply the DST-VII to the inter-residual block to achieve coding gain. The rearrangement of the residual block data is similar to the arrangement of the basis vector with a the lowest frequency component of the DST-VII. Experimental results show that the proposed method reduces the luma-chroma (Cb+Cr) BD rates by approximately 0.23% to 0.22%, 0.44% to 0.58%, and 0.46% to 0.65% for the random access, low delay B, and low delay P configurations, respectively.

• Journal of Advanced Navigation Technology
• /
• v.21 no.4
• /
• pp.359-364
• /
• 2017

Since the existing analog village broadcasting system has some technical problems in applying and degradations in performance due to its old equipments, it had been required recently to be changed to a wireless digital system and to develop the standardization. However, it is important to analyze the interference between villages in deploying the efficient digital wireless village broadcasting system. In this paper, simulations for co-channel and adjacent channel interference have been carried out considering digital private mobile radio(dPMR) and digital mobile radio(DMR) systems as a representative mobile radio. These results for frequency reuse and channel separation drawn from the separation distance between villages in co-channel interference and the frequency offset in adjacent interference can be helpful to establish a standard and the testing service in the near future.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.206-213
• /
• 2014

This paper presents a novel 90 GHz band 16-quadrature amplitude modulation (16-QAM) orthogonal frequency-division multiplexing (OFDM) communication system. The system can deliver 6 Gbps through six channels with a bandwidth of 3 GHz. Each channel occupies 500 MHz and delivers 1 Gbps using 16-QAM OFDM. To implement the system, a low-noise amplifier and an RF up/down conversion fourth-harmonically pumped mixer are implemented using a $0.1-{\mu}m$ gallium arsenide pseudomorphic high-electron-mobility transistor process. A polarization-division duplex architecture is used for full-duplex communication. In a digital modem, OFDM with 256-point fast Fourier transform and (255, 239) Reed-Solomon forward error correction codecs are used. The modem can compensate for a carrier-frequency offset of up to 50 ppm and a symbol rate offset of up to 1 ppm. Experiment results show that the system can achieve a bit error rate of $10^{-5}$ at a signal-to-noise ratio of about 19.8 dB.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.1-7
• /
• 2013

LED lamps are appropriate to the light source for use in broadcasting lighting. When the lighting frequency of LED lamp is different from the shutter frequency of camera, however, the flicker appears on the moving image which is taken by the camera under the dimmed light of LED lamp with conventional dimming methods. In this study, a new dimming method for the LED lamps used as the broadcasting lighting is proposed to minimize the flicker. A lighting period in the proposed dimming method is divided into the several sub-periods which have weight of the bits. Also, the proposed dimming method has characteristics that are optimizing the turn-on timings of two LED lamps to reduce the turn-off periods of the lamps and not to overlap the turn-on periods of the lamps. In the experiments, the incidence of the flicker is taken by the camera under several lighting conditions of the conventional dimming methods and the proposed dimming method. In addition, the brightness values of the frames are obtained in the moving image, and incidence of the flicker is evaluated and compared with conventional methods. From the results, the incidence of the flicker in the proposed method is more improved than the conventional methods.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.972-980
• /
• 2016

An ultra-wideband microwave monolithic integrated circuit high-power amplifier with excellent input and output return losses for phased array jammer applications was designed and fabricated using commercial $0.25-{\mu}m$ AlGaN/GaN technology. To improve the wideband performance, resistive matching and a shunt feedback circuit are employed. The input and output return losses were improved through a balanced design using Lange-couplers. This three-stage amplifier can achieve an average saturated output power of 15 W, and power added efficiency of 10% to 28%, in a continuous wave operation over a frequency range of 6 GHz to 18 GHz. The input and output return losses were demonstrated to be lower than -15 dB over a wide frequency range.

• ETRI Journal
• /
• v.31 no.1
• /
• pp.65-67
• /
• 2009

We introduce an advanced terrestrial digital multimedia broadcasting (AT-DMB) system that overcomes the limitation of data transmission rates of T-DMB by doubling it with the same frequency bandwidth. In this letter, we propose an efficient algorithm which generates a scalable transport stream in AT-DMB by multiplexing certain types of elementary streams encoded using scalable video coding and an MPEG-surround audio coder for high-quality multimedia services.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.306-307
• /
• 2015

본 논문에서는 ATSC (Advanced Television Systems Committee) 3.0 시스템을 위한 LDM (Layered Division Multiplexing) 기술을 제안하고, 그 성능을 전산실험을 통해 분석한다. 제안된 LDM 시스템은 기존의 TDM (Time Division Multiplexing) / FDM (Frequency Division Multiplexing) 기술에 비해 약 3 에서 9 dB 의 성능 이득을 나타낸다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.110-115
• /
• 2000

A K-band GaAs MMIC receiver module has been developed using 0.15 ${\mu}{\textrm}{m}$ HEMT technology process. It incorporates two front end low noise amplifiers, a double balanced diode mixer, and filters. The RF input frequency ranges 20.1 to 21 GHz and the IF output 1.1 to 2 GHz. Test results show an overall conversion gain of more than 27 dB, and less than a 2.2 dB noise figure. The image-rejection ratio greater than 21 dB has been obtained. The isolation between RF and IF ports is better than 27 dB, and between LO and IF is more than 50 dB.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.718-721
• /
• 2013

This letter proposes a novel calibration method for a multiport amplifier (MPA) to achieve optimum port-to-port isolation by correcting both the amplitude and phase of the calibration signals. The proposed architecture allows for the detection of the phase error and amplitude error in each RF signal path simultaneously and can enhance the calibrated resolution by controlling the analog phase shifters and attenuators. The designed $2{\times}2$ and $4{\times}4$ MPAs show isolation characteristics of 30 dB and 27 dB over a frequency range of 19.5 GHz to 22.5 GHz, respectively.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.29-39
• /
• 2010

This paper presents and analyzes laboratory test results of distributed translator (DTxR) for distributed frequency network (DFN) in the ATSC (Advanced Television Systems Committee) terrestrial digital TV broadcasting system. The DTxR laboratory test is classified to receiving part test and transmitting part test. The receiving part test includes dynamic range, random noise, single echo, and adjacent channel interference. The transmitting part test includes quality of output signal (out-of channel emission, quality of transmitting signal, and phase noise), frequency synchronization among output signals, and TxID (Transmitter Identification) signal's affect to the legacy receiver. By the laboratory test results, the receiving part of DTxR eliminates average -2.5 dB of single echo and has average 17.5 dB at TOV (Threshold of Visibility) under random noise environment. In addition, the transmitting part of DTxR satisfies the specification of US FCC (Federal Communications Commission), and frequency difference among DTxR output signals is less than 0.001 Hz.