• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.43-48
• /
• 2019

We design a reconfigurable optical node for metropolitan WDM networks, and numerically study the capability of the node in the optical signal level. Unlike a long-haul WDM system, major limitations of metropolitan WDM systems are power loss, fiber dispersion and optical signal-to-noise ratio(OSNR) degradation due to EDFAs. Therefore, we include the behaviors of transmitter and receiver, and fiber, EDFAs, and optical filters(MUX/DeMux) in numerical simulations with varying parameters over wide range. From simulation results, we can identify the maximum span numbers for OC-48 and OC-192 to achieve $BER<10^{-12}$ using the node structure at various received powers and residual dispersions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.257-262
• /
• 2010

In this paper, we propose an effective method for detecting signals among multi-user in cooperative communication system. Spread sequence is inserted to NULL space of synchronization channel to synchronize between each user among frame formats of the cooperative communication and then transmitted. In the receiver, the wanted signal is detected by using correlation among the inserted spread sequences. As simulation results, correlations among the signals using m-sequence in AWGN, Rician, and Rayleigh channel are shown. Using the simulation results in this paper, we expect a reliable cooperative communication.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.57-62
• /
• 2019

This paper evaluates the QE-MMA (Quantized Error-MMA) adaptive equalization algorithm by the number of quantizer in order to compensates the intersymbol interference due to channel in the transmission of high spectral efficient nonconstant modulus signal. In the adaptive equalizer, the error signal is needed for the updating the tap coefficient, the QE-MMA uses the polarity of error signal and correlation multiplier that condered nonlinear finite bit power-of-two quantizing component in order to convinience of H/W implementation. The different adaptive equalization performance were obtained by the number of quantizer, these performance were evaluated by the computer simulation. For this, the equalizer output signal constellation, residual isi, maximum distortion, MSE, SER were applied as a performance index. As a result of computer simulation, it improved equalization performance and reduced equalization noise were obtained in the steady state by using large quantizer bit numbers, but gives slow in convergence speed for reaching steady state.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.85-90
• /
• 2019

This paper related with the M-CMA adaptive equalization algorithm which is possible to improve the residual isi and robustness performance compare to the current MMA algorithm that is reduce the intersymbol interference occurs in channel when transmitting the QAM signal. The current MMA algorithm depend on the cost function and error function using fixed signal dispersion constant, but the M-CMA algorithm depend on the new proposed cost function and error function using multiple dispersion constant. By this, it is possible to having robustness of the CMA and simultaneous compensation of amplitude and phase of MMA. The computer simulation was performed in the same channel and noise environment for compare the proposed M-CMA and current MMA algorithm. The equalizer output signal constellation, residual isi, MD, MSE learning courves and SER, represents the robustness were used for performance index. As a result of simulation, the M-CMA has more superior to the MMA in robustness and other performance index.

• International journal of advanced smart convergence
• /
• v.2 no.1
• /
• pp.21-23
• /
• 2013

The antenna pattern in this case has a main beam pointed in the desired signal direction, and has a null in the direction of the interference.The conventional antenna pattern concepts of beam width, side lobes, and main beams are not used, as the antenna weights are designed to achieve a set performance criterion such as maximization of the output SNR.A new direction of arrival estimation method using effects of model errors and sensitivity analysis is proposed. Two subspaces are used to form a signal space whose phase shift between the reference signal and its effects of model error signal. Through simulation, the performance showed that the proposed method leads to increased resolution and improved accuracy of DOA estimation relative to those achieved with existing method. Since a desired signal is obtained after interference rejection through correction effects of model error, the effect of channel interference on the estimation is significantly reduced.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.295-302
• /
• 2011

In this paper we consider technological requirements to broadcast digital television signals using single frequency networks(SFN) in the Advanced Television Systems Committee(ATSC) transmission systems and propose Interference Cancellation Digital On Channel Regenerative Repeater(IC-DOCR) thar overcomes the limitation of EDOCR(Equalization Digital On Channel Repeater) proposed by ETRI. The proposed IC-DOCR maintains the benefits of EDOCR that have good output signal quality removing multi-path, additive white Gaussian noise(AWGN). In additional, since the Interference Cancellation algorithm using the 8-VSB symbol demodulation of received signal removes the Interference of feedback signal, IC-DOCR improve the weakness of EDOCR that have low isolation between receive and transmit antenna so that can overcome the limitation of output signal power. we did analysis and verification of the proposed system performance using computational simulation.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.927-934
• /
• 2013

This paper aims to realize a Signal to Noise Ratio Estimator which constitutes a critical index of the broadcasting system in OFDM system with a synchronized type based on ISDB-T system. Of the elements which are comprising OFDM segments of ISDB-T system using the MSE algorithm suitable for ASIC design owing to its low complexity among a diverse SNR estimation methods, SNR estimation method using the broadcasting information data and the SNR estimation method using scattered pilot signal were realized by RTL. These two methods were compared in terms of their performance through simulation test not only in the AWGN channel which is an ideal channel, but also in SFN channel and frequency selective fading channel, which are distorted channels. Complexity of two methods were also compared through RTL realization. As a result of this comparison analysis, it was concluded that the SNR estimation method using scattered pilot signal shows more excellent performance and easiness in realization.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.37-43
• /
• 2009

Reliability should be assured to support the stable ubiquitous sensor network services in wireless sensor networks. Data transmission reliability is the most important one in the reliability factors in USN. When we consider the wireless communication environment of sensor networks, data transmission reliability requires the performance improvement. For this, this paper introduces the method that can handle the reliability and the performance together. The proposed scheme uses the self relay signal between sensor nodes to deliver the ACK and the next data is scheduled to be sent on acceptance of this self relay signal. For the evaluation of the performance improvement, the analysis and the simulation have been done.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.37-43
• /
• 2012

In this paper, we analysis wideband spectrum sensing with distance based weight combining for Cognitive Radio (CR) systems. CR systems is implemented the spectrum of the Primary User(PU) by using a energy detection method. Threshold is determined in accordance with the constant false alarm rate (CFAR) algorithm for energy detection. The signal of PU is BPSK signal and the wireless channel between a PU and CR systems is modeled as Gaussian channel. From the simulation results, the wideband sensing with distance based and Distance based weight Combing (DWC) methods shows higher spectrum sensing performance than single CR user spectrum sensing.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.305-308
• /
• 2001

We analyze mathematically a VSB (vestigial side-band) transceiver system for the Advanced Television Systems Committee (ATSC) digital television standard and extract a near-baseband equivalent VSB channel model. This model shows the multi-path fading effect of the quadrature component on the in-phase component. Also, we obtain a simplified model of the VSB transceiver system, which is represented by convolution of the transmission signal (before modulation) and the VSB channel. This simplified model is efficiently used for simulation of VSB systems to improve its performances, especially in an equalization part. Applying the DTV channel specifications tested by the Advanced Television Test Conter (ATTC) to the channel model, we obtain an equivalent VSB channel and show the equalization result by using the conventional derision-feedback equalize (DFE).