• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.14-19
• /
• 2015

Recently, water sewage disposal facilities are able to manage real-time data collection and record management through compact broadband modem LAN switching technology. Therefore, it needs more stable and efficient facility management. So, we required practical use of environmental facilities convergence based on broadband integrated modem. In this paper, we proposed short distance wireless communication network of compact broadband modem for sewage disposal facilities. And it received data inside of water treatment facility using the two communication methods (IEEE802.11x and IEEE802.15.4x). Then, our proposed an data-flow control algorithm of wireless network technology will prioritize processing data when emergency happen through collecting data, analysis data and processing. Lastly, we proved usefulness by experiment and simulation analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.2
• /
• pp.178-186
• /
• 2018

A chirp-echo data acquisition and processing system was developed for use as a simplified, PC-based chirp echo-sounder with some data processing software modules. The design of the software and hardware system was implemented via a field-programmable gate array (FPGA). Digital signal processing algorithms for driving a single-channel chirp transmitter and dual-channel receivers with independent TVG (time varied gain) amplifier modules were incorporated into the FPGA for better real-time performance. The chirp-echo data acquisition and processing system consisted of a notebook PC, an FPGA board, and chirp sonar transmitter and receiver modules, which were constructed using three chirp transducers operating over a frequency range of 35-210 kHz. The functionality of this PC-based chirp echo-sounder was tested in various field experiments. The results of these experiments showed that the developed PC-based chirp echo-sounder could be used in the acquisition, processing and analysis of broadband acoustic echoes related to fish species identification.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.5
• /
• pp.501-510
• /
• 2016

Capabilities of several beamforming techniques are compared for estimating the position of a moving source. Beamforming has enabled to widen our perspective of aeroacoustics in wind tunnel experiments and has provided useful approach in array measurements. Meanwhile beamforming techniques have been developed in a way to improve estimation accuracy and to save ing effort at the same time. In order to achieve reasonable outcome from aeroacoustic measurement, it is important to identify the spectral characteristics of source and to select an appropriate beamformer. Though aeroacoustic sources normally generates broadband noises, many array signal processing have been focused on narrowband processing which makes calculation numerically efficient. However, calculation in frequency-domain requires selection of single frequency of interest which affects spatial resolution and sidelobe level as a consequence. To be able to localize broadband noise source, it is proposed to use broadband beamforming. The formulas implements the deletion of diagonal term from cross spectral matrix. In this study, trajectory of flying source emitting broadband noise was simulated and several beamformers are applied.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.87-90
• /
• 2014

Recently, environment facilities are able to manage real-time data collection and record management through integrated broadband modem LAN switching technology. Therefore, it need more stable and efficient facility management. So, we required practical use of environmental facilities convergence based on broadband integrated modem. In this paper, we proposed an integrated broadband modem LAN switching technology which can applicable to the environment facility. Also, we presented integrated broadband modem of design plan and communication system. And it received data inside of environment facility using the two communication methods(IEEE802.11x and IEEE802.15.4x). Then, our proposed integrated broadband modem LAN switching technology will prioritize processing data when emergency happen through collecting data, analysis data and processing. Lastly, we proved usefulness by experiment and simulation analysis.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1346-1349
• /
• 2002

This paper presents the design and implementation of 16-QAM modem that can be applied to fixed broadband wireless access systenm. It is implemented in the hardware prototype that consist of FPGA(Field Programmable Gate Array) for digital signal processing and analog front end module for analog signal processing. We provide 20.48Mbps data rate using implemented modem and test the modem in KOREA 26㎓ broadband wireless local loop system including IFU(Intermediate Frequency Unit) and RFU(Radio Frequency Unit) via air interface.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1096-1097
• /
• 2007

We address the data confidentiality for wireless broadband (WiBro) networks. In WiBro, as the channel is wireless in nature, it suffers from passive and active attack. Passive attack, for example is to decrypt traffic based on statistical analysis and active attack is to modify traffic or inject new traffic from unauthorized mobile stations. Due to high mobility, frequent session key distribution is a bottleneck for the mobile stations. In aspect of WiBro, there is a communication between mobile station to base station, and also in mobile station to mobile station. It is expected to ensure data confidentiality while maintaining minimum overhead for the resource constrained mobile stations. In this paper, we proposed a security framework based on the concept of hyper-encryption to provide data confidentiality for wireless broadband networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.5
• /
• pp.413-417
• /
• 2014

In coherent superhigh speed optical transmission link, compensating the system impairments are critical issues. Among these issues, phase noise and carrier frequency offset are the most important impairments which interrupt the signal recovery. This paper suggests a algorithm of digital signal processing that compensates the phase noise and carrier frequency offset and verified its validity. The suggested digital signal processing algorithm has a lower computational complexity compared with the previous algorithms, so it can ease the burden of signal processing at the receiver to provide high speed optical transmission system.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.95-98
• /
• 2001

The adaptive line enhancer (ALE) is widely used for enhancing narrowband signals corrupted by broadband noise. In this paper, we propose novel ALE methods to improve the enhancing capability. The proposed methods are motivated by the fact that the output of the ALE is a fine estimate of the desired narrowband signal with the broadband noise component suppressed. The proposed methods preprocess the input signal using ALE filter to regenerate a finer input signal. Thus the proposed ALE is driven by the input signal with higher signal-to-noise ratio (SNR). The analysis and simulation results are presented to demonstrate that the proposed ALE has better performance than conventional ALE´s.

• IE interfaces
• /
• v.17 no.1
• /
• pp.121-127
• /
• 2004

In this paper, we present the base station(BS) processing capacity to provide the multimedia services in IMT-2000 wireless communication network. The IMT-2000 services are classified into two types, circuit and packet services, and user‘s environments such as indoor, pedestrian and vehicle are considered. Using the parameters of service economics and wireless technology, the user's reference traffic and BS‘s traffic are computed. The traffic is measured by throughput(kbps). Based on the measured traffic, the accommodating users in BS are also evaluated. In addition to, the BS design capacity is presented for varying the number of users and traffic distribution in different user's environments.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.300-304
• /
• 2017

In a cylindrical sonar, a conventional broadband energy detector has limitations in the separation of adjacent targets. In this paper, a broadband detection algorithm using cross-correlation is applied to the cylindrical sonar to improve the bearing resolution. The proposed algorithm uses split beamforming before broadband detection processing using cross-correlation to generate half beams. The time delay obtained from the peak of correlation between half beams is used to estimate the bearing of target. Simulations demonstrate the improved performance of the proposed algorithm against the conventional algorithm.