• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.207-211
• /
• 2015

In this paper, we proposed a broadband planar Yagi-Uda dipole antenna with dual tapered balance and unblance (balun) by CPW-fed to CPS. This antenna consisted of driver, three directors, dual tapered balun and CPS-fed to CPS. The fed structure of CPW-fed to CPS had a benefit points much simpler than other planar Yagi-Uda antennas and provided design more flexibility in arranging the reflector. The proposed antenna is introduced dual tapered balun to improve the impedance matching. It balun is inserted between the CPW-ground and the CPS. The proposed antenna is exhibited the bandwidth of 4.78 GHz (1.94~6.72 GHz) (S11 < -10 dB) and the gain of 4.9~7.2 dBi within that bandwidth. This antenna will applicate wireless communication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1334-1340
• /
• 2003

In this paper, We have proposed an Heterodyne technique to generate millimeter-wave signal. Microwave signals in cellular broadband mobile communication networks and distributed networks can favorably be generated and distributed by optical techniques. In principle, these techniques have already been investigated for optical control of phase- array antennas, characterization of photo-detector and phase locking of millimeter-wave oscillators and now being applied to wireless communications. The generation and transmission of millimeter-wave radio signals by optical means is of interest for future pico-cell broadband mobile communication system, especially for systems operating at frequencies of 300Hz.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.178-182
• /
• 2002

Superconducting four-element patch array antenna was designed and fabricated using $high-T_{c}$ superconducting (HTS) thin film. The array antenna has single-feed circularly polarization and a resonance frequency of 11.85 GHz fur satellite communication system. To fabricate this antenna $YBa_2$$Cu_3$$O_{7-x}$(YBCO) superconducting thin films were deposited using rf-magnetron sputtering technique. Sequential rotation technique based on radiation elements($0^{\circ}$ , $90^{\circ}$, 1$80^{\circ}$, $270^{\circ}$ phase delay) was utilized to achieve circularly polarization. Simulated and measured results, the analysis on resonant frequency(fr), return loss, and bandwidth are presented. The results show that 10 dB return loss bandwidth of the array antenna is 11.04 GHz~12.59 GHz (13.15%) and 3dB axial ratio bandwidth is 11.42~12.52 GHz (9.2%).).).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.195-198
• /
• 1999

A technique is investigated for achieving broadband properties by controlling the operation frequency of microstrip antennas. The control is achieved by applying DC bias to the microstrip antenna. Air gap antenna with PZT post is fabricated. by using in C-band. In the case of Air gap antenna, the variation of center frequency was about 16Mhz and the bandwidth was increased up to 123.3% at 15dB, 160.7% at 20dB than before applying DC bias respectively. The change property of frequency in air gap antenna is nearly the same the C-V property in PZT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3104-3109
• /
• 2009

The technology of direction finding is very important to find the direction of emitters for ELINT(electronic intelligence) system. The principle of TDOA(time difference of arrival) is to receive an emitter signal with two antennas, measure the time difference between two antennas, and converse the time difference to direction difference. This technology can be used in broadband frequency system and make the system very simple because a phase-discriminator and a voltage comparator are not needed. For fine DF accuracy, high time resolution receiver and long basis line antennas are needed. The DF accuracy of noise added signals is simulated with different time

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1097-1106
• /
• 2009

In this paper, the cross monopole antenna with branch element is presented and its radiation characteristics are investigated. To confirm the broadband characteristics of the proposed antenna, the experimental antenna is designed, fabricated, and its radiation characteristics are measured in PCS, WCDMA, WiBro and S-DMB band(1.750~2.655 GHz). It is shown that the designed antenna has the non-directional pattern in the horizontal plane, the directional pattern in the vertical plane, VSWR less than 1.5 and gain over 1.9 dBi in 1.72~2.82 GHz. From these results, the presented antenna is conformed as a broadband antenna which can be used for PCS, WCDMA, WiBro and S-DMB band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1581-1587
• /
• 2004

In this paper, We have proposed an Heterodyne technique to generate millimeter-wave signal. Microwave signals in cellular broadband mobile communication networks and distributed networks can favorably be generated and distributed by optical techniques. In principle, these techniques have already been investigated for optical control of phase-array antennas, characterization of photo-detector and phase locking of millimeter-wave oscillators and now being applied to wireless communications. The generation and transmission of millimeter-wave radio signals by optical means is of interest for future pico-cell broadband mobile communication system, especially for systems operating at frequencies of 300Hz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2769-2774
• /
• 2010

In this paper, we have proposed sideband injection locking method, heterodyne technique, to generate millimeter-wave signal. Microwave signals in cellular broadband mobile communication networks and distributed networks can favorably be generated and distributed by optical techniques. In principle, these techniques have already been investigated for optical control of phase-array antennas, characterization of photo-detector and phase locking of millimeter-wave oscillators and now being applied to wireless communications. The generation and transmission of millimeter-wave radio signals by optical means is of interest for future pico-cell broadband mobile communication system, especially for systems operating at frequencies of tens of GHz applicable to LMDS. We experimented and analysed the generation of millimeter wave signal.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.465-470
• /
• 2002

A novel phased array antenna system for space-borne polarimetric SAR is proposed and completed in this paper.The antenna system assures polarimetric and multi-mode capability of SAR. It has broadband, high polarization isolation and high port to port isolation. The antenna system is composed of broadband polarimetric microstrip antenna, T/R modules and multifunction beam controller nit. The polarimetric microstrip antenna has more than 100MHz bandwidth at L-band with -30dB polarization isolation and high port to port isolation. The microstrip element and T/R module's structure and characteristics, the subarray's performances measuring results are presented in detail in this paper. A design scheme on beam controller of the phased array antenna is also proposed and completed, which is based on Digital Signal Processing (DSP) chip -TMS320F206. This beam controller unit has small size and high reliability compared with general beam controller. In addition, the multifunction beam controller unit can acquire and then send the T/R module's working states to detection system in real time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.74-75
• /
• 2016

Various types of microstrip antennas can be used for many applications in wireless communication systems. In this paper, we studied a design method for a broadband dual-fed stacked microstrip patch antenna. The impedance bandwidth is improved by adjusting the sizes of main radiating patch and parasitic patch, the distance between the patches, the length of inset feed line, etc. The antenna is designed by simulation for an operation in the frequency range of 2.3-2.7 GHz, and the antenna characteristics such as return loss, gain, radiation patterns are examined.