• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.245-250
• /
• 2014

This paper presents the broadband printed sleeve-monopole antenna implementing the sleeve monopole structure in the form of PCB. In the proposed antenna, the antenna performance was improved by the diameter variation of the radiator, the length variation of the sleeve, and the variation of the diameter of the sleeve conductor. HFSS simulator of ANSYS corp. was used in order to confirm the antenna parameter characteristic. According to the simulation results, the VSWR was less than 2 for the range of 2.12GHz~3.18GHz. The frequency bandwidth is 1.08GHz. The frequency range of the actual fabricated antenna was 2.0GHz~3.55GHz, the frequency bandwidth is 1.55GHz. The maximum gain was 1.64dBi. The proposed antenna was $56{\times}5{\times}1.6mm$ in size. The utilization possibility of the broadband printed sleeve-monopole antenna could be confirmed according to compare and analyze the simulation and measurement data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.41-51
• /
• 2017

Recently, Broadband Internet service in the rural area is deployed actively so it will be needed to identify the factors influencing success for continuous spread. In this paper, we explain the users'satisfaction of BcN for rural area and verify success factors such as obstacles the digital divide through the empirical analysis. We select basic variables from Information System (IS) Success Model and add specific variables from former research about overcoming digital divide. The results show that system quality has a significant influence on satisfaction. Use and satisfaction have an impact on eliminating the digital divide in rural area. Based on the findings, academic and practical implications for establishing Broadband Service in rural area are also discussed.

• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.760-765
• /
• 2012

In this paper, we studied a design method for a quasi-Yagi antenna (QYA) with broadband characteristics of an impedance bandwidth ratio greater than 2 : 1 and a gain > 4 dBi. The QYA is fed by a microstrip line fabricated on a coplanar strip line and it consists of 3 elements; a planar dipole, a nearby director close to the dipole, and a ground plane reflector. By placing a wide rectangular patch-type director near to the dipole driver, broadband characteristics are achieved. An optimized 3-element QYA for operation over 1.6-3.5 GHz (bandwidth ratio 2.2 : 1) is fabricated on an FR4 substrate with a size of 90 mm by 90 mm and tested experimentally. The results show an impedance bandwidth of 1.56-3.74 GHz (bandwidth ratio 2.4 : 1) for VSWR < 2, a peak gain of 4.2-6.3 dBi, and a front-to-back ratio (FBR) > 13.6 dB within the bandwidth.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.511-523
• /
• 2007

In broadband convergence network(BcN), heterogeneous broadband wired & wireless subnetworks and various terminal equipments will be interconnected. In order to provide end-to-end realtime multimedia services on such heterogeneous networking environment, as a result, two major problems should be resolved: i) Multimedia session establishment & negotiation that adjusts the differences in the capability of multimedia data processing at the end terminal nodes, ii) quality of service(QoS)-guaranteed connection establishment or resource reservation with connection admission control(CAC) in each heterogeneous subnetworks along the path. The session layer signaling(e.g., SIP/SDP) should be extended for QoS negotiation, and must be tightly cooperating with network layer signaling or resource reservation with CAC function. In this paper we propose a session and connection management architecture for the QoS-guaranteed realtime multimedia service provisioning on BcN, with Q-SIP/SDP, resource reservation protocol with traffic engineering extension, and CAC functions. The detailed interaction scenario and related algorithms for QoS-guaranteed realtime multimedia session, resource reservation and connection establishment are explained and analyzed. From the experimental implementation of the proposed scheme on a small scale BcN testbed, we verified that the proposed architecture is applicable for the realtime multimedia service provisioning. We analyze the network performance and QoS parameters in detail.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.265-275
• /
• 2004

In this paper, an OFDM-CDMA broadband system is considered for a possible candidate of fixed wireless broadband access network applications. With an emphasis on a preamble design for multi-channel separation, we address a channel estimation based on the time-domain windowing and its imperfectness in OFDM-based multiple-antenna transmission systems. By properly designing each preamble for multiple antennas to be orthogonal in the time domain, the channel estimation can be applied to the ETSI HlPERLAN/2 and IEEE-802.11a standards in the case of more than two transmit antennas. Also, an effect of diversity techniques on the performance of OFDM-CDMA based broadband wireless access networks is investigated and the maximum achievable diversity gain for a two-path Rayleigh fading environment is evaluated Simulation results show that the OFDM-CDMA system applying a space-time-frequency diversity with a full-rate full diversity code can give the diversity of D = 4 and D = 8 for both multi-user cases of maximum user and half user capacities, respectively.

• International Journal of Computer Science & Network Security
• /
• v.22 no.12
• /
• pp.245-251
• /
• 2022

In this paper, a high gain, broadband planar vivaldi antenna (PVA) by utilizing a broadband stripline feed is developed for wireless communication for IoT systems. The suggested antenna is designed by attaching a tapered-slot construction to a typical vivaldi antenna, which improves the antenna's radiation properties. The PVA is constructed on a low-cost FR4 substrate. The dimensions of the patch are 1.886λ₀×1.42λ₀×0.026λ₀, dielectric constant Ɛ_r=4.4, and loss tangent δ=0.02. The width of the feed line is reduced to improve the impedance bandwidth of the antenna. The computed reflection coefficient findings show that the suggested antenna has a 46.2% wider relative bandwidth calculated at a 10 dB return loss. At the resonance frequencies of 6.5 GHz, the studied results show an optimal gain of 5.82 dBi and 85% optimal radiation efficiency at the operable band. The optometric analysis of the proposed structure shows that the proposed antenna can achieve wide enough bandwidth at the desired frequency and hence make the designed antenna appropriate to work in satellite communication and medical internet of things (M-IoT) healthcare applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.9-14
• /
• 2016

The Korea Communication Commission(KCC) measures communication qualities of mobile phones' voice calls, mobile internet, and broadband internet to provide quality communication services. It particularly focuses on measuring qualities of mobile internet data that is on the rise in terms of usage. However, existing quality measurement simply measures the speed of mobile communication through data without providing much information to users and does not disclose measured data, making it hard for individuals to objectively determine their communication quality. Thus, to improve such problems, the author suggests a system that measures qualities of mobile communication through Android. The method guarantees user convenience and reliability and improved mobile communication by making it easy for users to select the quantity of data to be used. It also saves the current GPS obtained through GPS module or mobile communication network and transfers measured data to servers so that the data can be processed into new information and be reinterpreted.

• Korean Management Science Review
• /
• v.11 no.3
• /
• pp.103-128
• /
• 1994

Due to the trend of evolution toward a broadband communication network with fiber-optics, the design and operation of fiber-optic network have been received a great deal of research attention recently. Furthermore, even a single fiber link failure in the network may result in severe service loss. Thus, the network survivability becomes an importantissue in planning and designing the network. This survey is on modelling of various fiber-optic subscriber loop network(FSLN) design problems, which are essential ones for providing broadband communication services and B-ISDN services. Models are classified and investigated as either conventional decomposition-iteration approach or integrated design method. To build survivable networks, SHR models are also suggested by ring control schemes. The result of this study will be effectively applied to build a design model for FSLN in the practical applications.

• Journal of Communications and Networks
• /
• v.8 no.4
• /
• pp.475-479
• /
• 2006

In Korea, we witness vivid evidences of changing trend in communication that insist the emergence of new networking architecture. To accommodate the changing trend and to hold current strong position in global IT industry, Korea have launched broadband convergence network (BcN) initiative. BcN vision for Korea is to be the first in the world to realize converged network infrastructure and ubiquitous service environment. In this paper, we have introduced the concept and the vision of BcN with a viewpoint of a new paradigm to prepare future-proof communication environment. And then, we have disclosed BcN research and development (R&D) activities including R&D philosophy, R&D phases, and key technologies required. Also, we have discussed current development issues in three technology branches including service and control technology, unified transport technology, and next-generation access technology.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.263-267
• /
• 2004

A new type of interaction circuitry for a broadband gyro-TWT is presented in this paper. A method for the analysis of dispersion characteristics of a periodic structure, which is composed of conducting posts in a rectangular waveguide, is presented. This method utilizes a mode matching technique and equivalent circuit model. The calculated and measured results demonstrate that this periodic structure could be utilized for the interaction circuit of a wide band Gyro-TWT.