• 한국항해항만학회지
• /
• 제26권3호
• /
• pp.289-294
• /
• 2002

본 논문에서는 디지털 TV 중계기용 고출력 광대역의 3-Way 전력결합기를 설계.제작하였다. 대역폭 증가와 고출력을 동시에 이루기 위하여 Wilkinson 형태의 전력분배기를 채택하였다. 우선 Wilkinson 전력분배기를 균등(1 : 1) 및 비균등(2 : 1) 분배시켜, 동위상 4 포트 전력결합기를 시뮬레이션 하였다. 시뮬레이션 결과에 따라서 두께 120 mil인 유전체 기판을 사용하여 제작된 전력결합기는 디지털 TV 중계기 주파수 470~806 MHz 대역에서 삽입손실 -6.53dB 이하, 반사계수 -13dB 이하, 포트 간 분리도 -15 dB 이하, 출력 포트 간 위상차가 13$^{\circ}$이하의 특성을 보였다. 새롭게 만든 전력결합기는 회로에서의 고 임피던스로 인한 마이크로스트립 선로 폭의 한계와 고출력의 경우 선로간의 상호작용으로 인한 전력의 손실 및 협대역의 문제를 동시에 개선이 가능함을 알 수 있었다. 나아가서, 제작된 3-Way 결합기의 삽입손실, 반사계수, 포트간의 분리도 및 위상차가 디지털 TV 중계주파수 470~806 MHz에서 양호한 특성을 나타내는 것을 확인함으로써 고출력 및 광대역화가 실현가능하다는 것을 알 수 있었다.

• 한국ITS학회 논문지
• /
• 제13권1호
• /
• pp.127-134
• /
• 2014

본 연구에서는 X-밴드 taper 슬롯구조 능동위상 배열 안테나를 구현하였으며, 구현한 안테나의 성능을 해석하고 측정을 통하여 분석하였다. 제작된 광대역 위상배열 안테나의 능동반사계수 및 능동복사패턴을 측정한 결과를 통하여 설계된 위상배열 안테나의 능동반사계수 및 능동복사패턴 결과와 일치함을 확인하였고, 안테나의 광대역 빔 특성을 검증하여 설계 목표에 부합하는 안테나 구조를 제안하였다.

• ETRI Journal
• /
• 제37권1호
• /
• pp.26-31
• /
• 2015

Axial-ratio (AR) bandwidth enhancement is achieved for a circularly polarized (CP) cylindrical dielectric resonator antenna (DRA) using a wideband hybrid coupler (WHC) combined with dual probe feed. The presented WHC, comprised of a Wilkinson power divider and a wideband $90^{\circ}$ shifter, delivers good characteristics in terms of 3 dB power splitting and consistent $90^{\circ}$ (${\pm}5^{\circ}$) phase shifting over a wide bandwidth. In turn, the proposed CP DRA, for the employment of the WHC, in place of conventional designs, provides a significant enhancement on AR bandwidth and impedance matching. The antenna prototype with the WHC exhibits a 3 dB AR bandwidth of 48.66%, an impedance bandwidth of 52.5% for voltage standing wave ratio (VSWR) ${\leq}2$, and a bandwidth of 44.66% for a gain of no less than 3 dBi. Experiments demonstrate that the proposed WHC is suitable for broadband CP DRA design.

• 한국유체기계학회 논문집
• /
• 제2권4호
• /
• pp.57-64
• /
• 1999

The prediction method of the performance and aerodynamic noise from a sirocco fan was developed and compared with measured data. To predict the performance of the sirocco fan, the well-known slip coefficients and various loss models were tested and applied to forward curved sirocco impellers. Using loss models proposed for both impeller and casing, the predicted performance characteristics were in good agreement with measured ones by an ANSI test plenum. Various scaling models for aerodynamic noise from the sirocco fan were evaluated and tested against measured power levels in terms of flow coefficient. It was shown that the turbulent broadband sound power from the sirocco fan can be modeled successfully by trailing edge noise.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1997년도 추계학술대회발표논문집; 홍익대학교, 서울; 1 Nov. 1997
• /
• pp.245-248
• /
• 1997

As the increasing the demand on information service, high-capacity and high-speed telecommunication networks are required. For the networks, very intelligent telecommunication equipments such as DCS(Digital Cross-connect System) will be employed for the fast service on the various types of information including voice, data and image. This paper considers the transmission networks composed of DCSs and optical fibers as nodes and links of the networks, respectively. For the networks, some types of restoration algorithms are compared their characteristics for their potential applications. And a distributed control algorithm is described as an empirical example which is implemented on the BDCS(Broadband Digital Cross-connect System), where the BDCS is a type of DCS developed in Korea. Finally, some remarks on the associated further researches are added.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1148-1159
• /
• 1997

In the broadband integrated service digital networks (B-ISDN), ATM switches hould be abld to accommodate diverse types of applications ith different traffic characteristics and quality ddo services (QOS). Thus, in order to increase the utilization of switches and satisfy the QOS's of each traffic type, some types of priority control schemes are needed in ATM switches. In this paper, a nonblocking input and output queueing ATm switch with capacity C is considered in which two classes of traffics with different loss probability constraints are admitted. 'Partial push-out' algorithm is suggested as a loss priority control schemes, and the performance of this algorithm is analyzed when this is adopted in input buffers of the switch. The quque length distribution of input buffers and loss probabilities of each traffic are obtained using a matrix-geometric solution method. Numerical analysis and simulation indicate that the utilization of the switch with partial push-out algorithm satisfying the QOS's of each traffic is much higher than that of the switch without control. Also, the required buffer size is reduced while satisfying the same QOS's.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.165-176
• /
• 2000

Broadband networks are designed to support a wide variety of services with different traffic characteristics and demands for Quality of Services. Bandwidth allocation methods can be classified into two major categories： static and dynamic. In static allocation, bandwidth is allocated only at call setup time and the allocated bandwidth is maintained during a session. In dynamic allocation, the allocated bandwidth is negotiated during a session. The purpose of this paper is to develop policies for deciding and for adjusting the amount of bandwidth requested for a best effort connection over such as ATM networks.. This method is to develop such policies that a good trade off between utilization and latency using cell delay variation to the forecast the incoming traffic in the next period. The performances of the different polices are compared by simulations.

• 한국멀티미디어학회논문지
• /
• 제2권2호
• /
• pp.176-183
• /
• 1999

Using Asynchronous Transfer Mode(ATM) which is a high-bandwidth, low-delay, cell switching and multiplexing technology, Broadband-Integrated Services Digital Network (B-ISDN) can support communication services of all kinds. To evaluate the performance of ATM networks, traffic source models to meet the requirements are demanded. We can obtain random traffic distribution for ATM networks by using the Cellular Automata (CA) which have effective random pattern generation capability. In this paper we propose an algorithm using 2-D LHCA to generate more effective random patterns with good random characteristics. And we show that the randomness by 2-D LHCA is better than that of the randomness by 1-D LHCA.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.19-21
• /
• 2007

디지털용 Uncooled DFB 레이저 다이오드를 이용하여 광대역 아날로그 피드포워드 광송신기를 제작하였다. 광송신기의 상호변조왜곡 성분 및 잡음성분을 제거하기 위해 광 피드포워드 보상기법을 사용하였으며, 다중서비스를 위해 $2.05{\sim}2.60$ GHz(550 MHz)에서 상호 변조왜곡 성분이 10 dB 이상 억제되었고, 상대강도잡음은 1.5 dB 이상 억제되었다. 2.3 GHz 에서 3 차 상호변조왜곡성분이 21.3 dB, SFDR 이 7.11 dB 향상된 결과를 얻었다. 또한 단일 모드 광섬유 전송 실험을 통해 전송길이에 따른 3 차 상호변호 왜곡성분의 크기 변화를 확인하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.223-226
• /
• 2007

This paper first outlines the technology used in Power Line Communications(PLC) systems, and the political support being offered to the technology, from the point of view of its effect on electromagnetic compatibility (EMC). The radio spectrum needs protection from other interferers, and there is a regime in place to provide this interference avoidance/mitigation. Nevertheless, PLC has several features that mean that it is capable of creating such interference. These features are discussed, and some published field trial results are reviewed. Difficulties in achieving compatibility between the requirements for radio protection and the requirements for operation of the PLC system mean that there is no consensus as yet as to how PLC system components can be made compliant with EMC requirements. It is concluded that there is little prospect of an accommodation between the competing demands, so that if PLC is to become widespread it will be at the expense of the radio environment.