연구지역인 경상북도 경주시 봉길리 지역은 백악기 퇴적암을 기반암으로 제3기의 화성암과 암맥들이 관입하여 분포한다. 이 지역에 대한 단열의 발달 특성을 이해하기 위하여 비교적 균질하고 신선한 제3기 화강암에 대한 격자분석을 통하여 단열발달사와 단열밀도 분포에 대한 연구를 실시하였다. 단열군들은 북서-남동방향의 연성 전단띠 (set a) ${\to}$ 북북서-남남동 방향의 인장단열 (set d) ${\to}$ 서북서-동남동 방향의 인장 또는 정단층성 단열 (set b) ${\to}$ 북동-남서 방향의 우수향 주향이동성 단열 (set c) ${\to}$ 서북서-동남동 방향의 정단층이 재활성된 역단층성 단열 (set e)의 순서로 발달되었음이 인지되었으며, 북서-남동방향의 연성 전단띠 (set a)는 이후에 좌수향으로 취성의 재활성 운동을 겪었음을 보여 준다. 서로 다른 암상에 대한 단열 밀도분석 결과는 단열의 밀도가 암석의 생성시기보다는 암석의 물성에 더 강하게 영향을 받는 것으로 나타났으며, 같은 암상에서의 단열밀도는 단층손상대에서 급격하게 증가함을 보여주었다. 또한 이러한 단열밀도의 변화는 암상의 차이와 관입접촉부를 따른 단층운동뿐만 아니라 암맥의 관입시의 냉각에 의한 절리의 형성에도 일부 원인이 있을 것으로 해석된다. 그러나 그 원인에 상관없이 이러한 단열의 증가는 유체의 유동에 좋은 통로의 역할을 하게 되어 이를 따른 유체의 유동뿐만 아니라 이에 포함된 원소의 이동에도 매우 중요한 기여를 할 것으로 생각된다.
본 연구에서는 ATR-FTIR (Attenuated Total Reflectance-Fourier Transfer Infrared)기법을 이용하여 PCB 회로형성에 사용하는 아크릴레이트 계열의 포토레지스트 드라이필름(Dry film)의 흡습 특성을 평가하였다. 또한 습도 변화에 따른 드라이필름의 파단면을 관찰하여 습도에 따라 고분자의 파단특성이 달라지는 것으로 확인하였으며, 정량적인 분석방법으로써 흡습에 따른 무게 변화 및 ATR-FTIR을 이용한 흡광도 변화를 통하여 확산계수를 계산하였다. 실험 결과 주변환경의 온도와 습도가 높아질수록 상온에서 취성과 연성의 중간 정도의 특성을 나타내던 드라이필름이 연성으로 전이되는 사실을 확인할 수 있었고, 온도와 습도가 낮을 경우엔 취성의 특성을 나타냄을 알 수 있었다. 이를 통해 PCB 회로형성 공정의 온 습도 환경 조건을 항상 일정하게 유지해야 일정한 품질을 유지할 수 있다는 사실을 알 수 있었다. 본 연구에서 사용된 흡습특성 평가법인 ATR-FTIR방법의 타당성을 확보하기 위해, 기존에 많이 사용하는 무게 변화법을 통한 고분자-물 확산계수와 ATR-FTIR을 이용한 값을 상호 비교하였다. ATR-FTIR을 이용한 방법은 무게변화법과 동일한 수준의 정확도를 가질 뿐만 아니라 흡습 및 탈습 과정에서 고분자 구조가 어떻게 변화하는지를 평가할 수 있어 가장 적합한 방법으로 판단된다.
불가사리는 다양한 생리활성물질을 가진 유용한 해양생물자원으로 알려져 있으나 불가사리가 가진 특유한 냄새로 인해 기능성 소재로 활용하는데 많은 제약이 있다. 우리는 최근에 로스팅을 통해 이러한 문제점을 해결하고 효율적인 화장품 소재로서의 활용 가능성을 제시하였으나 열처리된 불가사리 추출물의 생리활성에 관한 연구는 거의 전무한 실정이다. 따라서 본 연구에서는 LPS에 의해 염증을 유도한 Raw 264.7 세포에서 열처리 불가사리 추출물의 염증 조절 기전을 조사하여 항염증 소재로서의 활용 가능성을 확인하였다. 열처리 불가사리 추출물은 LPS에 의해 증가된 NO의 분비량과 iNOS의 발현을 현저히 감소시켰고 IL-1β와 IL-6와 같은 pro-inflammatory cytokine의 발현에서도 유의미한 감소를 나타내었다. 또한 열처리 불가사리 추출물에 의한 NF-κB p65 단백질의 핵으로의 전이 억제와 NF-κB 저해제인 PDTC와의 동시 처리에 의한 NO 분비량 감소는 열처리 불가사리 추출물의 NO 생성 저해 효과가 NF-κB 신호전달을 통해 이루어짐을 보여주었다. 본 연구 결과는 열처리 불가사리 추출물이 NF-κB 신호전달 경로를 통해 염증매개인자들의 발현을 억제하여 염증반응을 효과적으로 제어할 수 있는 잠재력을 가진 기능성 소재로서의 가능성을 제시하고 있다.
다양한 열화 인자에 의해 저감된 콘크리트의 내구성은 구조물의 구조적 성능과 사용 수명에 부정적인 영향을 미치게 되며 콘크리트 연구 분야 중에서도 매우 중요하고 매력적인 주제라고 할 수 있다. 이러한 이유로 콘크리트의 내구성과 관련된 많은 연구들이 발표되었으나 물리-화학적 열화에 기인하는 콘크리트의 본질적인 물성 변화에 주된 초점이 맞춰져 왔으며, 콘크리트 내구성과 구조물의 구조적 성능 사이의 관계 정립은 아직 미흡한 실정이다. 본 연구에서는 콘크리트의 강도 감소에 원인이 되는 칼슘 용출 열화를 적용하였으며, 열화 정도에 따른 구조적 거동을 평가하기 위하여 열화 손상을 입은 콘크리트 부재의 압축 및 휨 거동 실험을 수행하고 그 결과를 비선형 유한요소해석 결과와 비교 분석하였다. 연구 결과에 따르면 칼슘 용출 열화는 콘크리트의 압축 강도를 저하시키며, 열화가 진행됨에 따라 취성 거동에서 연성 거동으로 변화되는 경향을 나타냈다. 또한 열화에 의한 압축 영역의 손상 정도가 심화될수록 RC 부재의 내하력과 강성은 저하되었으며, 이러한 구조적 거동은 ABAQUS의 CDP 모델을 사용한 비선형 유한요소해석의 결과와도 비교적 잘 일치하였다.
High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight polymers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-ductile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a universal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.
Statement of problem: The endodontically treated tooth is generally restored with post and core, owing to the brittle and the loss of large amount of tooth structure. As periodontal treatment was developed, there are many cases that periodontally involved teeth used in prosthetic treatment. Purpose: The purpose of this study was to analyze the stress distribution in the dentin and post structures by the various post materials and the amount of remaining alveolar bone height. Material and method: The 3-dimensional finite element models of mandible 1st premolars were divided into six types according to the various amount of remaining alveolar bone and post type. All types were modeled using equal length, diameter and shape of the post. Three types of post and core materials were used: prefabricated titaniumpost and amalgam core, prefabricated stainless steel post and amalgam core, and cast gold post and core. 300 Newton force was applied to functional cusp of mandible 1st premolar. Results: The results were as follows: First, there was no apparent difference in the pattern of stress distribution according to the alveolar bone condition concentrate on the post middle area. Second, there was difference in pattern of stress distribution according to the core materials, gold post and core generated same than amalgam core. Third, there was no apparent difference in the pattern of stress distribution within the dentin according to the post and core materials. But a cast gold post and core generated the lowest maximum stress value, a stainless steel post generated the highest maximum stress value. Fourth, in the reduced alveolar bone model, maximum stress value is 1.5 times than that of the normal alveolar bone model. Conclusion: Within the limitations of this study, to provide minimal stress to the root with alveolar bone reduced, the post length may be as long as apical seal was not destroyed. To prevent fracture of tooth, it is rational to use gold alloy which material was good for stress distribution for post materials.
Nd-Fe-B계 합금에 대한 HDDR(hydrogenation : 수소화 - disproportionation : 분해 - desorption : 탈가스 - recombination : 재결합) 공정에서 실질적인 어려움은 제조된 분말의 자기적 특성, 특히 보자력의 재현성이 대단히 낮다는 점이다. 본 연구에서는 수소파쇄 시 입자 내에 미세균열을 최대한 도입하고 이것이 HDDR 처리한 $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ 합금 분말의 보자력의 재현성에 미치는 영향을 조사하였다. 수소파쇄된 분말 입자 내에 미세균열을 최대한 많이 도입하기 위하여 분해반응 전 고온에서 충분히 수소방출 처리를 실시하였다. 추가 수소방출처리를 실시하고 HDDR 처리하여 제조한 분말은 보자력 및 그 재현성이 향상되었다. 추가 수소방출로 결정격자가 수축하면서 입자 내에 더욱 더 많은 미세균열이 도입되고, 이로 인하여 분말의 HDDR 반응 시 입자 전체에 걸쳐서 HDDR 반응이 균일하게 진행 되어 보자력의 재현성이 향상되었다.
The aim of this study was to investigate the physical properties of visible light curing Glass Ionomer cement for restorative esthetic filling. The control group was the autopolymerizing GC Fuji II Glass Ionomer cement (2.2: 1 P/L ratio) and the experimental groups were made by following procedure. To induce the polymerization by visible light, the powder of GC Fuji II GI cement and the liquid of Vitrabond for base & liner were mixed in an amalgam capsule with 2.5:1, 3.0:1, 3.5:1 P/L ratio (% wt/wt). After fabrication of specimens, compressive strength, fracture toughness ($K_{IC}$) Scanning Electron Microscope and X-ray Diffraction, water-leachable content, marginal leakage and surface roughness were studied. The results were as follows: 1. Only experimental No. 1 group (visible light curing) showed less compressive strength than control group 1 hour after curing. Strength was increased with aging in all groups, so the compressive strength of light curing groups was no less than that of autopolymerizing group after 3 weeks. 2. Experimental No.3 group (visible light curing) was inferior to No.2 group (visible light curing) in fracture resistance but light curing groups were more resistant to fracture than autopolymerizing group and showed ductile fracture pattern as compared with the brittle fracture pattern of autopolymerizing group. 3. From scanning electron microscopic image, various sized unreacted powder particles, surrounded by silica gel, were embedded in polysalt matrix. Light curing groups showed little crack and more dense unreacted particles than autopolymerizing group. 4. From X-ray diffraction analysis, GC Fuji II Glass Ionomer cement powder and all groups showed glassy appearance but light curing groups seemed to be more intensive in crystaline than autopolymerizing group. S. The most significant dissolution was shown in early setting period in all group. Light curing groups were dissolved less than autopolymerizing group. 6. Marginal leakage was not different significantly in case of cavity margin composed of same tooth structure (ex. only enamel margin, only dentin margin) but much more leakage was shown in dentin/cementum margin than enamel margin. In only case of only enamel margin, light curing groups were superior to autopolymerizing group. 7. All groups showed relatively smooth surface, which irregularity was less than $1{\mu}m$. Light curing groups were smoother than autopolymerizing group.
결합 기반 페리다이나믹 모델은 취성재료의 동적파괴 해석에 많이 이용되고 있으며, 최근의 연구(Bobaru et al., 2012)를 통해 적층유리 구조물의 동적 파괴 패턴 분석에도 활용되었다. 특히 실험(Bless et al., 2010)에서 나타난 적층유리 구조물의 다양한 손상 형태(압축 영역, Floret, Hertz-type 균열 등)를 결합 기반 페리다이나믹 시뮬레이션을 이용하여 구현하였다. 그러나 실제 적층 구조물은 각 유리판 사이를 탄성이 있는 층간 재료로 결합하는 반면, 기존의 페리다이나믹 수치 시뮬레이션에서는 층간 재료 결합을 무시하고 각 유리판이 직접 결속되도록 가정하여 층간 재료 효과가 무시되었다. 본 연구에서는 페리다이나믹 층간 재료 모델링을 통해 실제 적층 구조물에 보다 근접한 페리다이나믹 수치 해석 모델을 제안한다. 일반적으로 층간 재료는 매우 얇기 때문에 층간 재료를 명시적으로 모델링할 경우 많은 해석시간과 메모리가 소모되어 비효율적이다. 따라서 본 연구에서는 명시적 모델링을 대신하여 가상 절점을 통해 층간 재료를 모델링한다. 수치 예제를 통해 제안된 층간 재료 모델링의 효율성 및 정확성을 검토한다. 또한 압축 상태의 적층 구조물 해석을 위해 단거리 상호작용력에 기반한 투과 방지 기법을 도입하고 파라미터 테스트를 통해 검증한다.
열차폐코팅층의 박리는 세라믹/금속접합층 계면에서 취성이 큰 스피텔의 생성, 금속과 세라믹의 열팽창계수의 차이, 세라믹층의 상변태, 코팅층의 잔류응력에 기인한다. 본 연구에서는 인코넬 713C에 전자빔 코팅 및 플라즈마 용사법으로 코팅된 안정화지르코니아/CoNiCrAIY 계면의 산화거동을 조사하기 위하여 $900^{\circ}C$에서 등온산화시험동안 생성되는 산화막층과 스피넬 생성 거동을 관찰, 분석하였다. 코팅 직후 코팅층에 고르게 분포하고 있는 Co,Ni,Cr,AI,Zr의 원소들이 산화시간에 따라 확산하여 산화반응을 하였다. 초기 20시간의 산화기시간에 안정화지르코니아/CoNiCrAIY 계면에 주요 성분이 $\alpha$-$AI_2O_3$인 산화막층이 생성되었고, CoNiCrAIY층에는 AI의 외부확산으로 인한 AI 결핍지역이 생성되었다. 산화시험동안 $\alpha$-AI2O층이 임계두께까지 성장한 후에 산화막층의 성장속도는 감소하였고, 안정화지르코니아/산화막층 계면에 스피넬, $Cr_2O_3$, $CO_2CrO_4$의 형성으로 인한 크랙이 관찰되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.