• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.64-67
• /
• 2004

In this paper, to discover the brightness improvement of ZnS:Cu powder electroluminescence (EL), a new structure is proposed in which phosphor and dielectric are mixed between electrodes. Dielectric and phosphor material are BaTiO$_3$ and ZnS:Cu, respectively. The effect of the mixed layer on EL sample is considered the improvement of source efficiency. Although the number of electrons introduced into the phosphor increases only modestly, the high electric field region of phosphor grains increases comparatively in the characteristics of brightness-voltage. Furthermore, the relaxation occurs through leading and trailing edge pairs, which is relatively efficient in characteristics of decay time. With these results, we found that the brightness of newly proposed ZnS:Cu powder electroluminescence was 167.24 cd/$m^2$ at ac voltage of 100V and frequency of 400Hz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1100-1103
• /
• 2001

(1) By comparing and analyzing the distribution of brightness as domestic lamps and Japanese products go thinner and lighter, we set an effective design standard. (2) By comparing and analyzing the feature, brightness, chromaticity and uniformity of domestic LGPs and Japanese products, early home-manufacturing and stabilization in home-manufacturing are possible. (3) By comparing and analyzing the distribution of brightness as sheets are varied, we can design an ideal sheet composition.

• 스마트미디어저널
• /
• 제6권3호
• /
• pp.57-63
• /
• 2017

차량번호인식 개선을 위해서는 무엇보다 양질의 차량이미지를 획득하는 것이 무엇보다 먼저 선행되어야 하는 필수적인 요소이다. 일반적인 도로영상들은 시간, 햇빛, 날씨 등 다양한 환경의 영향을 받아 번호판 밝기가 일률적이지 않고 다양한 형태로 나타나기 때문에 여러 가지 이미지 보정 기능을 거치게 되고 이로 인하여 인식속도 저하, 인식률 저하 등이 나타난다. 따라서, 본 논문에서는 실시간 영상 촬영 시 번호판 주위의 밝기를 측정하여 카메라의 shutter, bright, gain등 이미지 밝기와 품질에 영향을 주는 각 요소를 실시간으로 제어하여 빠르고 선명한 고품질의 차량 이미지 촬영하기 위해 실시간 도로 영상을 통하여 제안된 방법을 테스트 하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.235-238
• /
• 2008

We report the improvement in brightness through the optimization of the organic passivation process for fabricating a TFT substrate for LCD-TV panel. In conclusion, the optimization of organic passivation was accomplished with improving over $10\;cd/m^2$ in brightness than that of a conventional organic passivation process.

• 한국통신학회논문지
• /
• 제31권5C호
• /
• pp.512-518
• /
• 2006

몰입감을 향상시키는 초대형 화면을 생성하기 위하여 여러 개의 프로젝터에서 투사되는 영상을 연결하여 마치 하나의 프로젝터에서 투사되는 영상처럼 보이게 하는 기술에 대한 연구가 활발히 진행 되고 있다. 각 프로젝터의 밝기는 그 모델이나 램프의 사용기간에 따라서 달라진다. 이를 보정하기 위하여 여러 프로젝터에서 투사된 영상들의 밝기를 균일하게 맞추는 일이 중요하다. 기존의 방법들은 프로젝터의 밝기 값만을 고려한 방법으로 밝기 보정을 하면 디스플레이 되는 화면이 어두워지는 경향이 있다. 본 논문에서는 프로젝터의 밝기만을 고려하던 기존의 밝기 보정 방법들과는 달리 프로젝터의 입력 영상의 밝기를 고려한 프로젝터의 밝기 보정방법을 제안하였다. 그 결과 기존의 방법들에 비해 멀티 프로젝터를 사용하여 스크린에 투사된 영상들의 밝기를 개선하여 자연스러운 영상을 얻을 수 있다. 이상의 과정을 simulation하여 그 동작을 확인하였고, 실제 영상에 적용하여 그 성능의 우수성을 입증하였다.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.161-170
• /
• 2015

Mean separated histogram equalization in order to preserve the original mean brightness has been proposed. To provide the minimum mean brightness error after the histogram modification, the input image's histogram is successively divided by the factor of 2 until the mean brightness error is satisfied the defined threshold. Then each divided group or sub-histogram will be independently equalized based on the proportional input mean. To provide the overall minimum mean brightness error, each group will be controlled by adding some certain pixels from the adjacent grey level of the next group for giving its mean near by the corresponding the divided mean. However, it still exists some little error which will be put into the next adjacent group. By successive dividing the original histogram, we found that the absolute mean brightness error is gradually decreased when the number of group is increased. Therefore, the error threshold is assigned in order to automatically dividing the original histogram for obtaining the desired absolute mean brightness error (AMBE). This process will be applied to the color image by treating each color independently.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1062-1065
• /
• 2004

We have analyzed the cause of black "mura" and measured it in prism light guide plate(LGP). Properties of components used in a backlight uint(BLU) have changed by simulation tool. We get major factor of black "mura" for improvement in prism LGP. For the improvement of black "mura", removal of brightness "mura" at input light part must precede preferentially because of reflection characteristic of the prism LGP. Removal of brightness "mura" is improved by hanging of input light part in LGP and dispersion treatment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.165-168
• /
• 2004

We have analyzed the cause of black "mura" and measured it in prism light-guide plate (LGP). Properties of components used in a back light. unit (BLU) have changed by Simulation Tool. We get major factor of black "mura" for improvement in prism LGP. For the improvement of black "mura", removal of brightness "mura" at input light part must precede preferentially because of reflection characteristics of the prism LGP. Removal of brightness "mura" is improved by changing of input light part in LGP and dispersion treatment.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.32-37
• /
• 2011

In car refinishing, the paint film characteristics of clear coat play an important role in appearance quality. Thus, Primarily in this research, the variance of brightness with the change of the thickness of paint film is investigated. Besides, as changing the thickness of paint film, the correlation between surface leveling(which is one of appearance characteristics) is investigated in this research. Throughout this investigation, we come to know that the increase of clear coat paint film thickness leads the improvement of appearance characteristics within specific range of thickness. Furthermore, the fact that too thick paint film does not increase the brightness or appearance characteristic any more is known. The optimum thickness of clear coat film for the best and appearance characteristics is derived from this research and more efficient way of determining optimum thickness of paint film is found. Particularly, haze value and waviness have more influence on vividness than brightness. Throughout all experiments, the appearance characteristics are much better at painted horizontally than vertically. These results are derived due to the facts that to obtain the same paint film thickness at painted vertically with painted horizontally is difficult and the way of vertical painting is different from horizontal painting. Therefore, the improvement of vertical painting and horizontal painting are required.

• 한국레이저가공학회지
• /
• 제11권1호
• /
• pp.1-6
• /
• 2008

We proposed new light guide panel (LGP) fabrication method exploiting laser-processed inner scatterers and surface pattern. The proposed method has achieved LGP performance improvement in both brightness and uniformity. The inner scatterers and surface pattern of grid type were fabricated with a 2nd harmonic Nd:YAG pulse laser engraving system and a $CO_2$ laser scanning system, respectively. In the implementation of LGP, inner scatterers was arranged in accordance with linear or curved pattern with changing density and surface pattern was engraved on the surface of an inner-scatterers embedded LGP. The increase of scatterers' density and the use of surface patterns in both linear and curved pattern provided high luminance and uniformity enhancement. While thecurved pattern incorporated with increased scatterers' density and surface patterns yielded brightness improvement with preserving good uniformity, the linear pattern showed highly localized brightness near the light entrance of the LGP. We can also observe that the uniformity was mainly determined by pattern of inner scatterers, and the brightness was improved by the higher density and the utilization of surface patterns. From the results, the use of laser-processed inner and surface patterns can be a potential alternative for efficient and simple LGP fabrication method.