• 천문학회보
• /
• 제40권1호
• /
• pp.60.2-60.2
• /
• 2015

Since its detection in 1980, the $8-{\mu}m$ north-polar brightening of $CH_4$ on Juptier has not moved from $180^{\circ}$ (SysIII) longitude. The $8-{\mu}m$ $CH_4$ brightening is mostly thermal and very similar to that of $13-{\mu}m$ $C_2H_2$ emissions, but the morphology of these hydrocarbon north-polar brightenings are very different from that of the $3-{\mu}m$ $H_3{^+}$ auroral oval suggesting a significantly different excitation process yet unknown heating mechanism. Recently, Kim et al. (submitted to Icarus, 2015) found that that the center of the $3-{\mu}m$ $CH_4$ northern bright spot is located at ${\sim}200^{\circ}$ (SysIII) longitude, which is ${\sim}20^{\circ}$ west from the center of the $8-{\mu}m$ north-polar bright spot, and it does not coincide with the $3-{\mu}m$ $H_3{^+}$ bright spot. They found significantly high temperatures (500 ~ 850K) from $CH_4$ rotational lines on the $3-{\mu}m$ bright spot above the $1-{\mu}bar$ pressure level, while we find cooler temperatures (<350K) over the the $8-{\mu}m$ spot. They also found that the upper states of the $3-{\mu}m$ $CH_4$ bands are mostly populated by non-thermal excitations, such as auroral particle precipitations and/or Joule heatings in contrast to the $8-{\mu}m$ thermal emission. This finding indicates that the $10-{\mu}m$ hydrocarbon brightening is confined to low altitudes below the $1-{\mu}bar$ level eliminating the long-suggested possibility of direct auroral bombardments while opening a new possibility of dynamical origin for the $10-{\mu}m$ brightening.

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.160-165
• /
• 2006

We have designed a high-transmission nano aperture in a perfect electric conductor film with the incident beam of 532 nm wavelength. The aperture basically has a C-shape and is known to produce a bright spot nearby the aperture in small size less than diffraction limit. The bright spot is strongly coupled with the local plasmon excited through the aperture hole. The characteristics of transmission and peak power of the aperture output were calculated using finite differential time domain (FDTD) technique, and the geometry of the aperture was determined to get a maximum transmission and peak power. To find the effect of the surface plasmon induced near by the aperture, we calculated the variations of the transmittance and the beam sizes by changing the size of the input beam irradiated on the aperture.

• 한국작물학회지
• /
• 제4권1호
• /
• pp.103-108
• /
• 1968

담배 각종병해저항성 품종육성의 기초자료를 얻기 위하여 우리나라 재래종에 대한 몇가지 병해에 대한 저항성검정을 하였다. (1) 역병에는 우방초, 오심엽초만이 중정도의 저항성이 있으며 수안초, 우설초, 광초 등이 그 다음이고 그 외품종은 모두 나병성이였다. DB 101, $H_2$, BY 4 등은 재래종보다 저항성이였다. (2) 흑근병에는 목기초, 우방초, 오심엽초가 중정도의 저항성이며 우설초, 수안초, 회초가 다음이며 향초는 BY 4만은 못하나 재래종중에서 가장 나병율이 높았다. (3) 야화병에는 대부분 나병율이 높은 편이나 흑초, 회초, 우방초가 약간 저항성이 인정되고 그 외품종은 거의 나병성이다. (4) 적성병에는 오심엽초가 고도의 저항을 엿보이며 우방초, 향초, 목기초 등이 중정도이고 광초, 우설초는 나병성이였다. 대조품종인 BY4나 Beinhart 1,000-1보다는 모두 나병율이 낮았다. (5) CMV-Y에 대하여서는 향초가 고도의 저항성이 인정되고 회초, 가자초가 저도이기는 하나 저항성이 있는 듯하다. (6) Blue mold병에 대에 하여는 공시품종 모두가 고도의 나병성임으로 이에 대한 저항성품종의 발굴이 절실히 요망된다.

• Journal of Information Processing Systems
• /
• 제19권6호
• /
• pp.791-802
• /
• 2023

The manual inspection of photovoltaic (PV) panels to meet the requirements of inspection work for large-scale PV power plants is challenging. We present a hot spot detection and positioning method to detect hot spots in batches and locate their latitudes and longitudes. First, a network based on the YOLOv3 architecture was utilized to identify hot spots. The innovation is to modify the RU_1 unit in the YOLOv3 model for hot spot detection in the far field of view and add a neural network residual unit for fusion. In addition, because of the misidentification problem in the infrared images of the solar PV panels, the DeepLab v3+ model was adopted to segment the PV panels to filter out the misidentification caused by bright spots on the ground. Finally, the latitude and longitude of the hot spot are calculated according to the geometric positioning method utilizing known information such as the drone's yaw angle, shooting height, and lens field-of-view. The experimental results indicate that the hot spot recognition rate accuracy is above 98%. When keeping the drone 25 m off the ground, the hot spot positioning error is at the decimeter level.

• 한국균학회지
• /
• 제51권4호
• /
• pp.277-286
• /
• 2023

Tan spot, caused by Pyrenophora tritici-repentis, is a major foliar disease in wheat worldwide. In April 2021, tan spot symptoms were observed in a commercial wheat field in Suncheon, Jeonnam Province, Korea, with over 5% of the wheat leaves exhibiting symptoms. These symptoms included oval-shaped tan necrosis surrounded by a bright halo. The three representative isolates exhibited irregular mycelial growth on V8-potato dextrose agar and produced pseudothecia. Based on the concatenated sequence datasets of four multi-genes, including the internal transcribed spacer, large subunit ribosomal RNA, glyceraldehyde-3-phosphate dehydrogenase, and RNA polymerase II second-largest subunit genes, phylogenetic analysis revealed that these three isolates clustered in the same clade as P. tritici-repentis. Results of pathogenicity test indicated that the initial symptoms appeared 5 days post-inoculation (dpi), with typical tan spot symptoms developing at 7 dpi. The pathogen was successfully re-isolated from the symptomatic tissues, thus fulfilling Koch's postulates. Furthermore, we selected three fungicides that effectively inhibited the mycelial growth of P. tritici-repentis by more than 90% in vitro. To the best of our knowledge, this is the first report of tan spot disease in wheat in Korea.

• Applied Microscopy
• /
• 제46권3호
• /
• pp.155-159
• /
• 2016

This paper analyses the relationship between the distribution of a dielectric layer on the apex of a metal field electron emitter and the distribution of electron emission. Emitters were prepared by coating a tungsten emitter with a layer of epoxylite resin. A high-resolution scanning electron microscope was used to monitor the emitter profile and measure the coating thickness. Field electron microscope studies of the emission current distribution from these composite emitters (Tungsten-Clark Electromedical Instruments Epoxylite resin [Tungsten/CEI-resin emitter]) have been carried out. Two forms of image have been observed: bright single-spot images, thought to be associated with a smooth substrate and a uniform dielectric layer; and multi-spot images, though to be associated with irregularity in the substrate or the dielectric layer.

• 제어로봇시스템학회논문지
• /
• 제15권5호
• /
• pp.473-479
• /
• 2009

This paper proposes an efficient method to locate the automated guided vehicle (AGV) into a specific parking position using artificial visual landmark and vision-based algorithm. The landmark has comer features and a HSI color arrangement for robustness against illuminant variation. The landmark is attached to left of a parking spot under a crane. For parking, an AGV detects the landmark with CCD camera fixed to the AGV using Harris comer detector and matching descriptors of the comer features. After detecting the landmark, the AGV tracks the landmark using pyramidal Lucas-Kanade feature tracker and a refinement process. Then, the AGV decreases its speed and aligns its longitudinal position with the center of the landmark. The experiments showed the AGV parked accurately at the parking spot with small standard deviation of error under bright illumination and dark illumination.

• 지구물리
• /
• 제3권4호
• /
• pp.227-234
• /
• 2000

진폭이상이나 브라이트 스팟은 종종 탄화수소(가스, 석유)의 집적과 관계 있지만 또한 가까이 있는 두개의 반사면 때문에 생기는 튜닝효과에 의해서도 나타날 수 있다. 탄화수소의 가채매장량을 계산하기 위해서 탄성파 진폭과 저류암의 두께를 계산할 때 탄성파 진폭도로부터 튜닝효과를 제거할 수 있다. 가장 손쉬운 튜닝효과제거(디튜닝) 방법은 탄성파자료의 저류암 진폭을 쐐기모델로부터 얻어진 튜닝반응곡선을 이용하여 보정해 주는 것이다. 진폭이상과 관련된 탄화수소의 집적은 퓨닝효과가 제거된 자료를 이용해야 보다 정확하게 예측할 수 있다.

• Journal of Ginseng Research
• /
• 제27권4호
• /
• pp.188-194
• /
• 2003

Rust-spot on North American ginseng roots (Panax quinquefolius L.) is considered a physiological, not a pathological disorder. Ginseng rust-spot starts as an orange spot on the surface of the root and may spread forming a sunken, round to irregular lesion. 5 mm in diameter. Pieces of root, 7 mm in length and containing a rust-spotted lesion, were embedded in agar and sectioned using a vibratome. These sections and hand sections, cut with a two-sided razor blade, were examined using fluorescence microscopy. The 4-5 cell layers of the periderm were destroyed in the area of the lesion and orange substance:, were deposited in and around the lesion. Sections stained with vanillin-HCI and viewed using bright field microscopy confirmed that the orange substances were phenolic compounds. Scanning electron micros-copy showed that the periderm had pulled away from the root, or was completely destroyed, in the area of the lesion. The smooth surface of the lesion indicates the deposition of phenolic compounds in surrounding cells as a wound response. Roots sprayed or dipped in ethephon (1500 mgㆍL$^{-1}$ ) developed rust-spots, more so at 21$\pm$2$^{\circ}C$ than at 3$\pm$0.2$^{\circ}C$. Roots held at 21$\pm$2$^{\circ}C$ were yellowish and developed white cell proliferations. Comparable control roots also developed rust-spots likely due to the high undecomposed organic matter content of the incubation soilless mix.

• KSBB Journal
• /
• 제18권1호
• /
• pp.70-73
• /
• 2003

TLC를 이용하여 시료에 있는 젖산을 간편하고 신속하게 분리하고 정량 분석 할 수 있는 조건을 개발하였다. Silicagel TLC plate를 사용하는 경우 전개용매로 Nitromethane : 1-Propanol $H_2O$를 2 : 5 : 1.5 (v/v/v)의 비율로 섞어 사용하고 발색시약으로 Bromocresol purple 을 50% 에탄올 100 mL에 녹여(pH 10) 준비한 Bromocresol purple reagent를 사용하였을 때, 젖산은 엷은 주홍색의 TLC plate의 바탕에 자은 노란색 spot으로 확인되었으며 이 조건으로 0.5 - 4% 농도 범위의 젖산을 포함한 시료를 희석 없이 99.4%의 신뢰도로 쉽게 정량 분석할 수 있었고, 개발한 조건의 유효성은 HPLC 와 lactate dehydrogenase를 이용한 젖산 정량 분석으로 확인되었다.