• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.590-601
• /
• 1996

This study aims at developing the double cantilever beam (DCB) method in order to calculate the bridging stress distribution in polycrystalline aluminas with different grain sizes. In the already existing DCB methods the measured crack opening displacement (COD) in coarse-grained aluminas deviates generally from the calcula-ted one because of the grain-interface bridging in the crack wake. In the current DBC method developed in the present study the effect of the bridging stress was considered in the DCB analysis. whereas the only effect of applied point-loading at the end of DCB specimen was taken into account in the existing DCB analysis The crack closure due to bridging stress was calculated using the power-law relation and the theoretical model developed in Part I of the present paper as bridging stress function and then compared analytically. The limitations of the current DCB methods such as specimen dimensions applied loads and elastic modulus were discussed in detail to provide a reliability of the newly developed DCB analysis for the bridging stress distribu-tion in polycrystalline aluminas.

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.583-589
• /
• 1996

In this study a new analytical model which can describe the relationship between the bridging stress and microstructure has beenproposed in order to investigate the microstructural effect on the R-curve behavior in polycrystalline aluminas since the R-curve can be derived via the bridging stress function. In the currently developed model function the distribution of grain size is considered as a microstructural factor in modeling of bridging stress function and thus the bridging stress function including three constants PM, n, and Cx, can be established analytically and quantitatively. The results indicate that the n value is closely related to the grain size distribution thereby providing a reliability of the current model for the bridging stress analysis. Thus this model which explains the correlation of the bridging stress distribution and microstructual parame-ters is useful for the systematic interpretation of microfracture mechanism including the R-curve behavior in polycrystalline aluminas.

• 대한물리의학회지
• /
• 제11권2호
• /
• pp.33-40
• /
• 2016

PURPOSE: The purpose of this study was to determine the impact of stable and unstable surfaces on abdominal muscle thickness and changes in trunk muscle thickness in accordance with breathing methods during bridging exercises. METHODS: Bridging exercise on a stable surface, bridging exercise on an unstable surface, bridging exercise using a drawing-in maneuver on a stable surface, bridging exercise using a drawing-in maneuver on an unstable surface, bridging exercise using bracing on a stable surface, bridging exercise using bracing on an unstable surface. In sequence, the muscles' thickness was measured three times before and after each exercise, and the measured value was averaged. RESULTS: There were significant differences in internal oblique and transversus abdominis muscles' thickness in the drawing-in maneuver in both stable and unstable surface (p<0.05). There were no significant differences in external oblique muscle's thickness in the bridging exercise in both stable and unstable surface. The type of surface did not have a significant influence on the abdominal muscles' thickness. CONCLUSION: As a result of the study, the drawing-in maneuver had a greater effect than bridging or bracing maneuver on muscle thickness. We suggest that drawing-in maneuver will be more effective in a person with a weak abdominal muscle.

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.602-615
• /
• 1996

The purpose of the present study is to investigate the microstructural effect on the R-curve behavior in three aluminas with different grain size distributions by analyzing the bridging stress distribution. The crack opening displacement (COD) according to the distance behind the stationary crack tip was measured using an in situ SEM fracture method. The measured COD values in the fine-grained alumina agreed well with Wiederhorn's sollution while they deviated from Wiederhorn's solution in the two coarse-grained aluminas because of the increase of the crack closure due to the grain interface bridging in the crack wake. A numerical fitting procedure was conducted by the introduction of the power-law relation and the current theoretical model together with the measured COD's in order to obtain the bridging stress distribution. The results indicated that the bridging stress function and the R-curve computed by the current model were consistent with those computed by the power-law relation providing a reliable evidence for the bridging stress analysis of the current model. The strain-softening exponent in the power-law relation n, was calculated to be in the range from 2 to 3 and was closely related to the grain size distribution. Thus it was concluded from the current theoretical model that the grain size distribution affected greatly the bridging stress distribution thereby resulting in the quantitative analysis of microfracture of polycrystalline aluminas through correlating the local-fracture-cont-rolling microstructure.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1449-1458
• /
• 1994

A new analytical model which can discribe the relationship between the bridging stress and the crack opening displacement was proposed to investigate the microstructural effect on the R-curve behavior in a polycrystalline alumina. The crack opening displacement according to the distance behind the stationary crack tip was measured using in-situ fracture technique in an SEM, and then used for a fitting procedure to obtain the distribution of bridging stress. The current model and an empirical power law relation were introduced into the fitting procedure. The results indicated that the bridging stress function and R-curve computed by the current model were consistent with those computed by the power law relation. The microstructural factor, e.g., the distribution of grain size, was also found to be closely related to the bridging stress. Thus, this model explained well the interaction effect between the distribution of bridging stress and the local-fracture-controlling microstructure, providing important information for the systematic interpretation of microfracture mechanism including R-curve behavior of a monolithic alumina.

• Korea-Australia Rheology Journal
• /
• 제15권4호
• /
• pp.179-185
• /
• 2003

Associating polymers act as flocculants in colloidal suspensions, because the hydrophobic groups (hydrophobes) can adsorb onto particle surfaces and create intermolecular cross-linking. The steady-shear viscosity and dynamic viscoelasticity were measured for suspensions flocculated by multichain bridging of associating polymers. The effects of surfactant on the suspension rheology are studied in relation to the bridging conformation. The surfactant molecule behaves as a displacer and the polymer chains are forced to desorb from the particle surfaces. The overall effect of surfactant is the reduction of suspension viscosity. However, the additions of a small amount of surfactant to suspensions, in which the degree of bridging is low, cause a viscosity increase, although the number of chains forming one bridge is decreased by the forced desorption of associating polymer. Since the polymer chains desorbed from one bridge can form another bridge between bare particles, the bridging density over the system is increased. Therefore, the surfactant adsorption leads to a viscosity increase. The surfactant influences the viscosity in two opposing ways depending on the degree of bridging.

• Physical Therapy Rehabilitation Science
• /
• 제12권2호
• /
• pp.149-154
• /
• 2023

Objective: This study is designed to investigate the effect of ankle joint position on hip extensor muscle activity when bridging exercise in sagittal plane. Design: Cross-sectional study Methods: The subjects were recruited from 20 healthy adult men. The subjects performed three types of bridging exercises (normal bridging, ankle dorsiflexion bridging, ankle plantar flexion bridging) three times for five seconds with a rest of 15 seconds between measurements and two minutes of rest between each motion. The target muscles were the gluteus maximus, biceps femoris, soleus, and tibialis anterior. A surface electromyography was used to measure the muscle activity of these muscles. Results: The results show there was no statistically significant difference between the three types of exercise in the gluteus maximus muscle activity. However, the biceps femoris showed a significant difference between the three types of exercises (p<0.05). Conclusions: In conclusion, when the three different bridging exercises were performed by adding ankle motion to normal bridging exercise, there was a significant difference in the muscle activity of the gluteus maximus relative to the biceps femoris muscle activity in the order of the ankle dorsiflexion bridging, normal bridging, and ankle plantar flexion bridging exercise. Therefore, this could be an effective option for a bridging exercise if applied to patients with a weak gluteal muscle and shortening of the hamstring muscle in further studies.

• PNF and Movement
• /
• 제10권4호
• /
• pp.49-55
• /
• 2012

Purpose : The purpose of this study was to assess the effects of bridging exercise and combined lifting pattern bridging exercise on the lower extremity muscle activity. Methods : Twenty-five healthy adults volunteered to participate in this study. Subjects were required to complete following bridging exercises. Muscle activity was measured by QEMG-4 system(LXM 3204, Laxtha Korea). A paired t test was used to determine the influence of muscle activity for each exercise and descriptive statistics was used to characteristics of the subjects. Results : The biceps femoris, tibialis anterior, gastrocnemius of combined lifting pattern bridging exercise showed significance excepted vastus medialis(p<.05). In the case of men, biceps femoris showed significance in the combined lifting pattern bridging exercise(p<.05). In the case of women, biceps femoris and tibialis anterior showed significance in the combined lifting pattern bridging exercise(p<.05). Conclusion : The combined lifting pattern bridging exercise was more increased than bridging in lower extremity muscle activation. This result will be used for knee joint stabilizing exercises and biceps femoris strength training.

• Physical Therapy Rehabilitation Science
• /
• 제10권3호
• /
• pp.244-250
• /
• 2021

Objective: The purpose of this study was to investigate the effect of sprinter pattern bridging exercise using theraband on activation of lower extremity and abdominal muscle and to find out postures that can effectively improve abdominal and lower extremity muscle strength and increase abdominal stability. Methods: This study was designed as a cross-sectional study. The following research was done with applicants attending S university in Seoul to compare the difference in muscle activity between one-leg-Support bridging exercise and sprinter-pattern bridging exercise using theraband. For 48 study participants, we first measured their MVC. Then, we applied one-leg-support bridging exercise and sprinter-pattern bridging exercise at random order. These data were expressed as the percentage of maximal voluntary contraction (%MVC).Electromyography analysis was performed by measuring the external obliques, internal obliques, biceps femoris, and gluteus maximus. Results: There was a statistically significant increment of muscle activity in external and internal oblique muscle(p<0.001)by sprinter-pattern bridging exercise using theraband. On the lower body, statistically significant increment of muscle activity in biceps femoris and gluteus maximus was found(p<0.05). On the other hand, on erector spinae, there was statistically significant decrease in muscle activity(p<0.05). Conclusions: Efficient treatment is expected when sprinter-pattern bridging exercise using theraband is applied clinically.For patients with chronic knee and ankle pain who have difficulty bearing weight, including low back pain and internal rotation of the femur, starting with a low weight bearing, we think it will be helpful in planning systematic training aimed at progressively strengthening the lower extremities.

• The Journal of Korean Physical Therapy
• /
• 제24권5호
• /
• pp.319-324
• /
• 2012

Purpose: This study examined the muscle activities of the erector spinae (ES) and gluteus maximus (GM) during bridging exercises with and without abdominal-hollowing. Methods: Nineteen healthy subjects with no medical history of low back pain or hip flexion contracture were enrolled in this study. The subjects performed bridging exercises with and without abdominal hollowing or with and without a one-leg lift. The muscle activities of the ES and GM were measured by surface electromyography during bridging exercises under each condition. A 2 (abdominal hollowing)X2 (one-leg lift) repeated ANOVA was used to compare the normalized muscle activities of the ES and GM. Results: The muscle activity of the ES during bridging exercise with abdominal-hollowing was significantly smaller than that without abdominal-hollowing (p=0.00). The muscle activities of the GM during bridging exercise with abdominal-hollowing were significantly greater than those without abdominal-hollowing (p=0.00). In addition, the muscle activities of the GM during bridging exercise with one-leg lifting was significantly greater than that without one-leg lifting (p=0.00). Conclusion: Bridging exercise with abdominal-hollowing appears to be more effective on activating the GM muscle than that without abdominal-hollowing minimizing the activation of the ES muscle.