• 제목/요약/키워드: Bridge rectifier

검색결과 292건 처리시간 0.022초

Energy harvesting from conducted electromagnetic interference of fluorescent light for Internet of Things application

  • Hyoung, Chang-Hee;Hwang, Jung-Hwan
    • ETRI Journal
    • /
    • 제44권5호
    • /
    • pp.759-768
    • /
    • 2022
  • A novel energy harvesting technique that uses conducted electromagnetic interference as an energy source is presented. Conducted EMI generated from fluorescent light using a switched-mode power supply was measured and modeled as an equivalent voltage source. Two types of rectifier circuits-a bridge rectifier and a voltage doubler-were used as the harvesting devices for conducted EMI source. The matching networks were designed based on the equivalent model, and the harvested power was improved. The implemented energy harvester produces a regulated power over 68.9 mW and current over 15.1 mA while a regulated voltage can be selected between 3.3 V and 5 V. The proposed system shows the highest harvesting power indoor environment and can provide enough power for the Internet of Things devices.

고효율 결합 인덕터 정류단 위상천이 풀브릿지 컨버터를 위한 새로운 동기정류기 제어 기법 (A New Synchronous Rectifier Control Method for High Efficiency Phase-Shifted Full-Bridge Converter with Coupled Inductor Rectifier)

  • 김재상;김건우;문건우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2020년도 전력전자학술대회
    • /
    • pp.145-147
    • /
    • 2020
  • 본 논문에서는, 결합 인덕터 정류단을 갖는 위상천이 풀브릿지 컨버터에 적용할 수 있는 새로운 동기정류기 제어 기법을 제안한다. 결합 인덕터 정류단을 활용하면 1차측 환류 전류를 감소 시켜 도통 손실을 줄일 수 있지만, 동시에 줄어든 전류로 인하여 레깅-레그 스위치의 영전압 스위칭을 달성하기 어려워진다. 이를 해결하기 위하여 변압기의 자화 전류를 이용할 수 있지만, 컨버터가 넓은 출력 전압 범위로 설계되는 경우 낮은 시비율을 기준으로 작게 설계된 자화 인덕턴스로 인하여, 높은 시비율로 구동 시 과도한 자화 전류로 인한 불필요한 도통 손실이 증가하는 문제점을 갖는다. 제안하는 제어 기법은 기존 동기정류기 제어와 달리 동기정류기를 기존보다 먼저 구동시켜 1차측에 환류 전류를 순간적으로 재생성할 수 있고, 이를 이용하여 레깅-레그 스위치의 영전압 스위칭을 달성할 수 있다. 따라서, 작은 자화 전류로 영전압 스위칭을 달성할 수 있으므로 1차측의 도통 손실을 줄여 높은 효율을 얻을 수 있다. 제안하는 동기정류기 제어 기법의 효용성을 증명하기 위하여, 400V 입력, 27-54V/13A 출력에서 실험 검증을 진행하였다.

  • PDF

전파 정류기를 가지는 PWM 제어 기반의 AC-DC 컨버터 설계 및 제작 (Design and Making of PWM Control-based AC-DC Converter with Full-Bridge Rectifier)

  • 최범수;김상현;우동기;이민호;고윤석
    • 한국전자통신학회논문지
    • /
    • 제18권4호
    • /
    • pp.617-624
    • /
    • 2023
  • 최근, 전자 제품의 소형화와 저소비전력화 및 향상된 효율과 역률개선이 큰 관심 사항이 되고 있다. 본 논문에서는 PWM 제어기반의 AC-DC 컨버터를 설계, 제작하였다. AC-DC 컨버터는 하나의 정류회로와 하나의 출력전압 제어 회로가 직렬로 연결되는 구조로 설계하였으며, 정류회로는 다이오드 기반 단상 전파전류 회로, 출력전압 제어 회로는 PWM 제어기반의 DC-DC 변환 회로를 적용하였다. PWM 제어를 위한 주 제어장치로 아두이노를 이용하였으며, LCD를 출력 단에 구성하여 제어 결과를 확인할 수 있도록 하였다. 시험회로를 통한 반복 실험들을 통해서 오실로스코프와 LCD에 디스플레이 되는 출력전압과 목표 출력전압의 오차를 확인하였으며, 오실로스코프 측정값을 기준으로 약 5%의 오차율을 보임으로써 제안된 설계 방법론의 유효성을 확인할 수 있었다.

PFC Bridge Converter for Voltage-controlled Adjustable-speed PMBLDCM Drive

  • Singh, Sanjeev;Singh, Bhim
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권2호
    • /
    • pp.215-225
    • /
    • 2011
  • In this paper, a buck DC-DC bridge converter is used as a power factor correction (PFC) converter for feeding a voltage source inverter (VSI) based permanent magnet brushless DC motor (PMBLDCM) drive. The front end of the PFC converter is a diode bridge rectifier (DBR) fed from single phase AC mains. The PMBLDCM is used to drive the compressor of an air conditioner through a three-phase voltage source inverter (VSI) fed from a variable voltage DC link. The speed of the air conditioner is controlled to conserve energy using a new concept of voltage control at a DC link proportional to the desired speed of the PMBLDC motor. Therefore, VSI operates only as an electronic commutator of the PMBLDCM. The current of the PMBLDCM is controlled by setting the reference voltage at the DC link as a ramp. The proposed PMBLDCM drive with voltage control-based PFC converter was designed and modeled. The performance is simulated in Matlab-Simulink environment for an air conditioner compressor load driven through a 3.75 kW, 1500 rpm PMBLDC motor. To validate the effectiveness of the proposed speed control scheme, the evaluation results demonstrate improved efficiency of the complete drive with the PFC feature in a wide range of speed and input AC voltage.

교량진동을 이용한 진동형 자가발전기에 대한 연구 (A Study on Stand-Alone Electric Power Generator Using Bridge Vibration)

  • 최남섭
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2003년도 춘계종합학술대회
    • /
    • pp.313-316
    • /
    • 2003
  • 본 논문에서는 교량의 건전도 감시용 계측 유닛에 사용되는 충전시스템을 위한 교량의 상시진동을 이용한 자립형 진동발전기에 대하여 연구하였다. 본 연구에서는 전기자 반작용의 영향을 최소화한 진동발전기를 제안하고, 기계적 및 전기적인 설계식을 유도한 다음, 시험용 진동발전기를 제작하였다. 아울러, 실내 자유진동 실험을 수행하였고, 축전시스템에 대한 실험 결과, 정류기에 사용된 다이오드 특성이 충전과정에서 지배적임을 확인하였다. 또한, 남해대교의 진동 데이터를 Pilot 발전기에 적용하여 시뮬레이션 한 결과 진동발전기의 적용성과 효용성을 확인할 수 있었다.

  • PDF

Half bridge 회로를 기반으로 한 역률개선용 컨버터 (A High Quality Power Factor Correction Converter Based on Half Bride Topology)

  • 이준영;문건우;정영석;윤명중
    • 전력전자학회논문지
    • /
    • 제2권3호
    • /
    • pp.26-36
    • /
    • 1997
  • 본 논문에서는 저용량의 응용 분야에 적합한 half-bridge 컨버터를 기반으로 하는 단상 AC/DC 컨버터를 제안한다. 제안된 컨버터는 고역률, 저하모닉 왜곡의 특성이 있으며 좋은 출력 레귤레이션 특성을 가지고 있다. 그리고 asymmetrical 제어를 통해 소프트 스위칭을 함으로써 스위칭 손실을 줄였으며 출력단의 정류손실을 줄이기 위해서 synchronous rectifier를 적용하였다. 또한 본 컨버터를 체계적으로 설계하기 위해 평균화법을 통한 모델링을 수행하여 설계식을 도출하였다. 이 설계식을 통하여 프로토타입 컨버터를 설계하여 실험한 결과 제안된 컨버터는 IEC555-2 규제를 만족하였고 정격에서 효율은 약 85%를 얻었다.

  • PDF

건전도 감시용 자립형 계측유닛을 위한 진동발전시스템 (Vibration Powered Generator System for Stand-Alone Health Monitoring Sensor Unit)

  • 최남섭;김재민
    • 한국지진공학회논문집
    • /
    • 제7권2호
    • /
    • pp.85-92
    • /
    • 2003
  • 본 논문에서는 교량의 건전도 감시용 자립형 계측유닛을 위한 교량의 상시진동을 이용한 진동발전시스템을 제시하였다. 본 연구에서는 전기자 반작용의 영향을 최소화한 새로운 구조의 진동발전기를 제안하고, 기계적 및 전기적인 설계식을 유도한 다음, 시험용 진동발전기를 제작하였다. 또한, 매우 작은 발전 전류의 축전시스템에 대하여 고찰하고 개선점을 도출하였다. 축전시스템에 대한 고찰 결과, 정류기에 사용된 다이오드 특성이 충전과정에서 지배적임을 밝혔다. 마지막으로, 진동발전시스템 모델에 실측 남해대교 가속도 데이터를 적용한 시뮬레이션과 실내 실험을 수행하였고, 제작된 시험용 진동발전기의 적용성과 효용성을 확인할 수 있었다.

220V, 440V 3상 계통전압 혼용이 가능한 용접 전원장치용 위상천이 풀브리지 컨버터 (Phase-Shifted Full-Bridge Converter for Welding Power Supply Capable of Using 220 V, 440 V 3-Phase Grid Voltages)

  • 윤덕현;이우석;이준영;이일운
    • 전력전자학회논문지
    • /
    • 제26권5호
    • /
    • pp.372-375
    • /
    • 2021
  • A three-leg inverter-type isolated DC-DC Converter that can use 220 and 440 V grid input voltages is introduced. The secondary circuit structure of the proposed topology is center-tap, which is the same as the conventional phase-shifted full-bridge converter. However, the primary circuit structure is composed of a three-leg inverter structure and a transformer, in which two primary windings are connected in series. The proposed circuit structure has a wider input voltage range than the conventional phase-shifted full-bridge converter, and the circulating-current on the primary-side is reduced. In addition, the voltage stress at the secondary rectifier is greatly improved, and high efficiency can be achieved at a high input voltage by removing the snubber circuit added to the conventional converter. Prototype converters with input DC of 311 V, output of 622 V, and 50 V and 6 kW class specifications were designed and manufactured to verify the validity of the proposed topology; the experimental results are presented.

인버터 용접기용 3상 SMR의 운전특성에 관한 연구 (A Study on Operation Characteristics of 3-Phase SMR for Inverter Welding System.)

  • 채영민;고재석;최해룡;김진욱;최규하
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1997년도 전력전자학술대회 논문집
    • /
    • pp.49-54
    • /
    • 1997
  • One of the drawbacks of using diode-bridge rectifiers in the unity interface, is the line-current harmonic distortion caused by the nonlinear nature of the rectifier operation. So, a PWM converter for the power factor correction is analysed for unity power factor as well as low cost design, which enable to meet the limits of international standards.

  • PDF

Twin converter를 이용한 전자식 안정기에 관한 연구 (A Study on Electronic Ballast using the Twin Converter)

  • 한홍일
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2000년도 전력전자학술대회 논문집
    • /
    • pp.86-89
    • /
    • 2000
  • The rectifier circuit has been used in the various fields of inverter progress. This is simple and low price. Otherwise it has many problems in harmonic low power factor and etc. This paper use the twin converter of two jewel booster. It doesn't need the detection of voltage current and control PWM. The twin converter has stably the rectification source. Also the circuit is used a half-bridge inverter in the electronic ballast for lighting. Therefore this method is confirmed in high efficiency.

  • PDF