DOI QR코드

DOI QR Code

PFC Bridge Converter for Voltage-controlled Adjustable-speed PMBLDCM Drive

  • Singh, Sanjeev (Department of Electrical and Instrumentation Engineering, Sant Longowal Institute of Engineering & Technology) ;
  • Singh, Bhim (Electrical Engineering Department, Indian Institute of Technology Delhi)
  • 투고 : 2009.08.11
  • 심사 : 2010.11.20
  • 발행 : 2011.03.01

초록

In this paper, a buck DC-DC bridge converter is used as a power factor correction (PFC) converter for feeding a voltage source inverter (VSI) based permanent magnet brushless DC motor (PMBLDCM) drive. The front end of the PFC converter is a diode bridge rectifier (DBR) fed from single phase AC mains. The PMBLDCM is used to drive the compressor of an air conditioner through a three-phase voltage source inverter (VSI) fed from a variable voltage DC link. The speed of the air conditioner is controlled to conserve energy using a new concept of voltage control at a DC link proportional to the desired speed of the PMBLDC motor. Therefore, VSI operates only as an electronic commutator of the PMBLDCM. The current of the PMBLDCM is controlled by setting the reference voltage at the DC link as a ramp. The proposed PMBLDCM drive with voltage control-based PFC converter was designed and modeled. The performance is simulated in Matlab-Simulink environment for an air conditioner compressor load driven through a 3.75 kW, 1500 rpm PMBLDC motor. To validate the effectiveness of the proposed speed control scheme, the evaluation results demonstrate improved efficiency of the complete drive with the PFC feature in a wide range of speed and input AC voltage.

키워드

참고문헌

  1. A.M. Jungreis and A.W. Kelley, “Adjustable speed drive for residential applications,” IEEE Trans. Industry Appl., Vol. 31, No. 6, pp. 1315-1322, Nov.- Dec. 1995. https://doi.org/10.1109/28.475721
  2. T.-W. Chun, J.-R. Ahn, H.-H. Lee, H.-G. Kim and E.-C. Nho, “A Novel Strategy of Efficiency Control for a Linear Compressor System Driven by a PWM Inverter,” IEEE Trans. Ind. Electron., Vol. 55, No. 1, pp. 296-301, Jan. 2008. https://doi.org/10.1109/TIE.2007.909730
  3. T. Kenjo and S. Nagamori, Permanent Magnet Brushless DC Motors, Clarendon Press, oxford, 1985.
  4. T. J. Sokira and W. Jaffe, Brushless DC Motors: Electronic Commutation and Control, Tab Books USA, 1989.
  5. J. R. Hendershort Jr and T. J. E. Miller, Design of Brushless Permanent-Magnet Motors, Clarendon Press, Oxford, 1994.
  6. J. F. Gieras and M. Wing, Permanent Magnet Motor Technology - Design and Application, Marcel Dekker Inc., New York, 2002.
  7. P. Pillay and R. Krishnan, “Modeling, simulation and analysis of a permanent magnet brushless dc motor drives, part II: the brushless dc motor drive,” IEEE Trans. Ind. Appl., Vol. 25, No. 2, pp. 274-279, Mar./Apr. 1989. https://doi.org/10.1109/28.25542
  8. M. Naidu, T.W. Nehl, S. Gopalakrishnan and L. Wurth, “Keeping cool while saving space and money: a semi-integrated, sensorless PM brushless drive for a 42-V automotive HVAC compressor,” IEEE Ind. Appl. Mag., Vol. 11, No. 4, pp. 20-28, July-Aug. 2005. https://doi.org/10.1109/MIA.2005.1458271
  9. Bhim Singh, B.P. Singh and M Kumar, “PFC converter fed PMBLDC motor drive for air conditioning,” IE(I) Journal-EL, Vol. 84, pp. 22-27, June 2003.
  10. O. García, J.A. Cobos, R. Prieto, P. Alou and J. Uceda, “Single Phase Power factor correction: A survey,” IEEE Trans. Power Electron., Vol. 18, pp. 749-755, May 2003. https://doi.org/10.1109/TPEL.2003.810856
  11. A. Barkley, D. Michaud, E. Santi, A. Monti and D. Patterson, “Single stage brushless DC motor drive with high input power factor for single phase applications,” in Proc. IEEE PESC, 2006, pp. 1-10.
  12. N. Ismail, P. Jain and H.Soin, “A power factor corrected single stage full bridge AC/DC converter topology with zero switching losses,” in Proc. IEEE APEC, 1997, Vol.1, pp. 464-470.
  13. C.H. Chan and M.H. Pong, “A fast response full bridge power factor corrector,” in Proc. IEEE PESC, 1998, Vol. 2, pp. 1436-1442.
  14. A. Victor, A. Anunciada and R.D. Monteiro, “Single stage full bridge converter with power factor correction,” in Proc. IEEE PESC, 2001, Vol. 3, pp. 1566-1570.
  15. C.A. Gallo, J.A.C. Pinto, L.C. de Freitas, V.J. Farias, E.A.A.Coelho and J.B. Vieira, “An unity high power factor power supply rectifier using a PWM AC/DC full bridge soft-switching,” in Proc. IEEE APEC, 2002, Vol. 2, pp. 1190-1194.
  16. J.C. Crebier and J.P. Ferrieux, “PFC full bridge rectifiers EMI modeling and analysis-common mode disturbance reduction,” IEEE Trans. Power Electron., Vol. 19, No.2, pp. 378-387, March 2004. https://doi.org/10.1109/TPEL.2003.823190
  17. T.S. Kim, G.B. Koo, G.W. Moon and M.J. Youn, “A single-stage power factor correction AC/DC converter based on zero voltage switching full bridge topology with two series-connected transformers,” IEEE Trans. Power Electron., Vol. 21, No. 1, pp.89-97, Jan. 2006. https://doi.org/10.1109/TPEL.2005.861200
  18. N. Mohan, T. Undeland and W. Robbins, Power Electronics: Converters, Applications and Design, Second Edition, New York: John Wiley & Sons, 1995.
  19. A. I. Pressman, Switching Power Supply Design. Second Edition, New York: McGraw-Hill, 1998.
  20. Limits for Harmonic Current Emissions (Equipment input current ${\leq}$16 A per phase), International Standard IEC 61000-3-2, 2000.

피인용 문헌

  1. Single-Phase Bridgeless Zeta PFC Converter with Reduced Conduction Losses vol.15, pp.2, 2015, https://doi.org/10.6113/JPE.2015.15.2.356
  2. A Novel Single Phase Soft Switched PFC Converter vol.9, pp.5, 2014, https://doi.org/10.5370/JEET.2014.9.5.1592