• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.129-140
• /
• 2007

본 연구의 주목적은 최근 국내 아스팔트 교면포장의 가장 빈번한 파손의 하나인 포트홀의 발생을 저감하기 위해 포장체내에 체류된 수분을 신속히 배수할 수 있는 배수시스템을 개발하는 것이다. 이러한 배수시스템은 방수층과 포장층 사이에 $2{\sim}3cm$의 두께로 박층의 배수층을 구성하는 것으로서 방수층의 내구성 확보와 골재 최대입경 10mm이하의 배수성 혼합물을 박층으로 시공하는 기술이 가장 중요한 사항이다. 이를 위해 본 연구에서는 먼저 NCAT 배합설계법을 바탕으로 10mm 이하 배수성 혼합물을 개발하였고, 다양한 실내시험을 통하여 배수성 혼합물이 모든 품질기준을 만족함을 확인하였다. 방수층의 경우 MMA(Methyl Methacrylate)계 방수제의 적용성을 평가하기 위하여 저온 휨 시험, 접착인장강도 시험 등의 시험을 실시하였고 모든 물성이 기준을 만족하였다. 본 연구에서 개발된 배수시스템의 현장시공성 및 공용성을 평가하기 위하여 고속도로의 1개소 교량에 시험시공을 실시하였다. 시공후 각 포장층 재료에 대한 품질확인 시험결과 모두 기준을 만족하였고 체류수가 원활히 배수되는 것을 확인할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권5호
• /
• pp.68-77
• /
• 2014

본 연구에서는 초박층 교면포장으로 폴리설파이드 에폭시 폴리머 콘크리트 포장을 선정하여, 에폭시 아스팔트 포장, SFRC 포장과의 비교 분석을 통해 폴리머 콘크리트 포장이 강바닥판의 피로응력범위에 어떠한 영향을 미치는 지 분석하였다. 강바닥판의 피로응력범위를 산정하기 위해 Abaqus를 사용한 유한요소해석을 사용하여 비교평가하였으며, 용접부에 교축방향 및 교축직각방향의 다축응력이 발생하는 점을 감안하여 Signed Von-Mises 응력을 도입하여 피로 검토에 활용하였다. 강바닥판의 피로응력범위를 산정하기 위해 Abaqus를 사용한 유한요소해석을 사용하여 포장 재료 및 두께에 따라 비교평가하였으며, 용접부에 교축방향 및 교축직각방향의 다축응력이 발생하는 점을 감안하여 Signed Von-Mises 응력을 도입하여 피로 검토에 활용하였다.

• 자원리싸이클링
• /
• 제22권2호
• /
• pp.62-70
• /
• 2013

전기로 산화슬래그를 콘크리트용 잔골재로 사용하기 위해서는 제철소에서 제강과정에서 불안정한 용융상태의 제강슬래그를 에이징처리하여 안정된 구조로 변환시켜 이온이나 전자의 이동을 억제, 슬래그의 화학적 물리적 저항성을 증대시켜 사용하여야 한다. 우리나라에서는 전기로 산화슬래그 잔골재를 콘크리트용 잔골재로 활용하기 위한 제도적 기반으로서 KS F 4571이 제정되어 부산물의 자원화 시스템 기반이 마련되었다. 본 연구에서는, 전기로 산화슬래그 잔골재를 PMC(Polymer Modified Concrete) 포장공법에 잔골재로 치환하였을 경우, 콘크리트의 고정하중 증가에 따른 교량 상부에 미치는 영향에 대하여 연구하고자 하였다. 본 연구에서는 선정된 4가지 형식의 교량(RC 슬래브교, RC 라멘교, PSC Beam교, Steel Box girder교) 포장의 단위질량이 상향 적용시, 포장하중 증가에 따른 전체 고정하중은 약 1~2% 이내로 증가하고, 하중조합에 의한 부재력(설계모멘트)은 약 2% 이내로 증가하였다. 그리고 포장하중 증가에 따른 대상 구조물의 단면검토를 수행한 결과, 단면 안전율이 약 3% 이내로 감소하였다. 따라서, 포장의 단위질량 증가로 인해 구조물의 구조적 안전성에는 영향을 미치지 않을 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.96-102
• /
• 2019

강바닥판 교량의 교면 포장에 $240^{\circ}C$ 이상의 온도에서 포설 되는 구스 아스팔트 가 적용되는 경우, 구조물에 발생하는 열 영향의 검토를 수행하지만, 수치해석에 적용 가능한 열원 데이터에 대한 연구는 미흡하여 단순화된 온도 하중을 절점 하중으로 사용하고 있다. 이에 본 연구에서는 구스 아스팔트 포장 시 계측된 온도 데이터를 이용하여 비록 제한적이지만 평판요소에 직접 재하 가능한 열원 방정식을 구성하여 제시하였으며 간략한 수치해석을 통해 그 타당성을 확인하였다.

• 한국도로학회논문집
• /
• 제18권5호
• /
• pp.21-29
• /
• 2016

PURPOSES : The purpose of this study is to suggest a specific investigation guideline to decide priority of repairing old concrete pavements that pile up substantially. METHODS : In this study, a principle of division of homogeneous sections was proposed to reflect the characteristics of the pavement reasonably in the specific investigation results. In addition, a checklist and guideline of field investigation were suggested for the old concrete pavement sections, which require inspection toward their durability and structural performance. Furthermore, the items of laboratory test necessary to the old concrete pavement were suggested based on the existing laboratory test considering characteristics of the old concrete pavement. The present condition of the old concrete pavement could be analyzed by the test results. RESULTS : A method of division of homogeneous sections suitable for the specific investigation of the old concrete pavement was suggested. The proportions of distress severity of pavement sections were compared by distress type to figure out the present state of the old concrete pavement. Scaling, durability cracking (or alkali-silica reaction), and longitudinal spalling were selected as the most severe distress types. The detailed positions of the sections were also suggested. The checklist of the specific investigation was categorized by field survey and laboratory test, and its evaluation criteria were proposed. The three types of the sections of durability cracking (or alkali-silica reaction), bridge connection, and asphalt overlay were selected as the sections of the field survey. The compressive strength, void structure, and chloride penetration depth were suggested as the items of the laboratory test. CONCLUSIONS : A fundamental level of the guideline was suggested in this study to resolve the problem of old concrete pavement. Appropriate guidelines related to the repair of the old concrete pavement should be provided by performing additional research efforts.

• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.389-403
• /
• 2010

Based on the Model Coupled Method (MCM), a case study has been carried out on a Concrete-Filled Steel Tubular (CFST) tied arch bridge to investigate the vibration problem. The mathematical model assumed a finite element representation of the bridge together with beam, shell, and link elements, and the vehicle simulation employed a three dimensional linear vehicle model with seven independent degrees-of-freedom. A well-known power spectral density of road pavement profiles defined the road surface roughness for Perfect, Good and Poor roads respectively. In virtue of a home-code program, the dynamic interaction between the bridge and vehicle model was simulated, and the dynamic amplification factors were computed for displacement and internal force. The impact effects of the vehicle on different bridge members and the influencing factors were studied. Meanwhile the acceleration responses of some of the components were analyzed in the frequency domain. From the results some valuable conclusions have been drawn.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.161-166
• /
• 2004

The impact factor of bridges is analyzed based on experimental data to examine the characteristics of the dynamic responses of bridges. The experimental impact factors are compared with the impact factor of Korean Highway Design Specification and Japan T-load in terms of the span length. According to the superstructural types of bridges, the variation of the impact factor is analyzed. When vehicles are passing on a bridge, the dynamic effect acts on the bridge impact factor more than at the time of design because of the velocity of vehicles, the surface roughness reduction due to the deterioration of the bridge deck pavement, and the disconnection of the bridge entrance and the expansion joint. Because the actual value is greater than the expected value at the time of design, the dynamic response of the bridge accelerates the deterioration of the bridge due to the accumulation of fatigue, and the bridge's life-time is shortened and can have an influence on the serviceability and safety of the bridge.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.57-66
• /
• 2017

PURPOSES : This study develops eco-friendly asphalt reinforcement materials applicable to bridge deck pavement. The main purpose is to ensure highly reliable quality applicable to structures and the possibility of practical application. The main target of the study is to develop materials that are environmentally friendly and capable of improving performance. METHODS : The application of double-reinforcement fiber improves the performance of the road pavement. 1. We use recycled film for application of sheet-typed reinforcement. 2. We use preprocessing fibers to reinforce the properties of composite pavement materials. RESULTS : The developed products may produce materials that fit the purpose of achieving stability and environmental friendliness. Sheet-typed reinforcements use more than 50% recycled resin. The most important type of damage to the asphalt layer is deflection (plastic deformation). These products have a very high deflection resistance of not less than 6,000 cycles/mm. In addition, all performance is excellent. Thus, it will be easier to access the field in the future. CONCLUSIONS : Fiber-reinforced asphalt pavement showed excellent performance. Sheet-typed reinforcements containing 50% recycling resin produced good performance in terms of functionality as well as environmental friendliness. Thus, enhancing the field applicability will enhance the usability of the reinforcements.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.175-178
• /
• 2009

This study is thing for construction properties that protect about damage of waterproofing course that is problem in asphalt pavement and latex modification concrete pavement. It is thing about new method of construction and develop protecting material of waterproofing. Did performance test item first at, as a result, drew by suitable thing in all KS items, This is considered to have more effective spot construction work because if means that have stability by material as well as method construction.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.101-110
• /
• 2013

PURPOSES : The purpose of this study is to evaluate the durability of ternary blended concrete mixtures adding ultra fine admixture. METHODS : From the literature review, crack was considered as the main distress failure criterion on concrete bridge deck pavement. To reduce the initial crack development due to drying shrinkage, CSA expansion agent and shrink reduction agent were used to ternary blended concrete mixtures as a admixture. Laboratory tests including chloride ion penetration test, surface scaling test, rapid freeze & thaw resistance test, non restrained drying shrinkage and restrained drying shrinkage test were conducted to verify the durability of ternary blended concrete mixtures. RESULTS : Based on the test results, proposed mixtures were verified as high qualified durable materials. Expecially initial drying shrinkage crack was not occurred in ternary blended concrete mixtures with CSA expansion agent. CONCLUSIONS : It is concluded that the durability of proposed ternary blend concrete mixture was acceptable to apply for the concrete bridge deck pavement.