• 한국농촌건축학회논문집
• /
• 제13권1호
• /
• pp.37-44
• /
• 2011

The maintenance works for brick-structured buildings are a new field in Korea, and practical cases are yet inadequate so that such works may cause adverse effects of damaging the buildings after all. Therefore, this study has extracted a preservation technology believed to be most desirable in minimizing the damage to the original state of the buildings and preserving the value as the cultural assets through maintenance work details from 1986 to 2010 regarding brick-structured buildings designated as cultural properties. Firstly, a brick replacement method of using the brick used at the time of construction is efficient in replacement and repair of brick material for preserving value of cultural assets and minimizing damage of the original form. Secondly, use of lime mortar through material analysis is effective in repair of masonry joint and mortar but it is not used often due to high experimental cost. Finally, reinforcement of structure using a form for a building with severe damage is most efficient when considering additional problems. However, damage on the original form of a building can be minimized and value of a building can be preserved only when consideration on sufficient case analysis, materials to be used, and conditions of a building is supported.

• 한국농촌건축학회논문집
• /
• 제7권1호
• /
• pp.51-60
• /
• 2005

In Korea, there still exist a number of modern architectural structures which were built from 1876 - when Korea first opened its port to foreign trade - to the early 1960s. Modern architectures have been rather neglected from the study of Korean architecture history partly because of its short period and negative attitude toward them that they are remains of the Japanese colonial period. However, interest in modern structures is recently increasing, and researches and studies are actively going on. This dissertation is a study on brick laying techniques and design characteristics of Modern brick structure churches in Jeonbuk-province. The results demonstrate that modern brick structure churches in Jeonbuk-province have become small and simple with time and that their structures and designs are closely related.

• Coupled systems mechanics
• /
• 제4권1호
• /
• pp.19-36
• /
• 2015

Modelling and analysis of a brick masonry building involves uncertainties like modelling assumptions and properties of local material. Therefore, it is necessary to perform a calibration to evaluate the dynamic properties of the structure. The response of the finite element model is improved by predicting the parameter by performing linear dynamic analysis on experimental data by comparing the acceleration. Further, a nonlinear dynamic analysis was also performed comparing the roof acceleration and damage pattern of the structure obtained analytically with the test findings. The roof accelerations obtained analytically were in good agreement with experimental roof accelerations. The damage patterns observed analytically after every shock were almost similar to that of experimental observations. Damage pattern with amplification in roof acceleration exhibit the potentiality of earthquake resistant measures in brick masonry models.

• 보존과학회지
• /
• 제38권4호
• /
• pp.265-276
• /
• 2022

A long-term monitoring investigation at Sarushima Battery (Kanagawa, Japan), which is one of the modernization heritages was conducted from 2017.06 to 2020.12. The investigation of the temperature and relative humidity (RH), measurement of the amount of brick decay, and X-ray diffraction analysis of the brick decay was conducted to understand in detail the environment in which the historical brick structure, the state of deterioration, identify the factors of deterioration. Furthermore, it was discussed whether the suitability of these investigation methods for assessing the status, identifying the level of deterioration and the factors that led to deterioration at the historical brick heritages. It was found that the brick deterioration at the site progressed especially in two periods: in April, and from June to August. These periods coincided with the period when the RH inside the structure decreased, and the Toyo-gumi bricks were in the process of absorbing moisture. Several different types of salts were detected in brick decay, especially thenardite, which is considered highly hazardous and destructive during periods when the amount of brick decay increased. Therefore, the RH in the structure and the salts present in the bricks were identified as one of the factors in the deterioration of the bricks at the site. The methods used in this study are appropriate as the initial survey methods for investigating the current conditions and identifying the causes of deterioration because it is possible to understand the environment within the modernization heritages, grasp the details of deterioration progression, and identify the characteristics of deterioration progression and its factors through long-term investigation using the simple methods.

• 한국전자파학회논문지
• /
• 제19권8호
• /
• pp.940-945
• /
• 2008

본 논문에서는 능동 위상 배열 레이다 시스템에 적용 가능한 브릭형 구조의 능동 송수신 모듈을 설계 및 제작하였다. 제안한 브릭형 구조의 능동 송수신 모듈은 MCM(Multi-Chip Module) 형태이며, 타일형 능동 송수신 모듈에 적용할 수 있도록 하기 위하여 캐비티 구조와 주요 특성을 만족하도록 설계하였다. 제작한 브릭형 능동 송수신 모듈의 시험을 통하여 목표로 한 전기적 특성을 만족함을 확인하였으며, 능동 위상 배열 레이다에 운용 가능성을 확인하였다.

• Computers and Concrete
• /
• 제13권6호
• /
• pp.749-764
• /
• 2014

Structural safety has always been a key preoccupation for engineers responsible for the design of civil engineering projects. One of the mechanisms of structural failure, which has gathered increasing attention over the past few decades, is referred to as 'progressive collapse' which happens when one or several structural members suddenly fail, whatever the cause (accident, attack, seismic loading(.Any weakness in design or construction of structural elements can induce the progressive collapse in structures, during seismic loading. Masonry infill panels have significant influence on structure response against the lateral load. Therefore in this paper, seismic performance and shear strength of R.C frames with brick infill panel under various lateral loading patterns are investigated. This evaluation is performed by nonlinear static analysis. The results provided important information for additional design guidance on seismic safety of RC frames with brick infill panel under progressive collapse.

• 건축역사연구
• /
• 제24권4호
• /
• pp.55-64
• /
• 2015

This paper aimed to identify architectural historical meaning of the brick-constructed platform of the west hall in Hwangnyoungsa buddhist temple site based on studying published the excavation survey report and comparing with other platforms of Silla remains. Mass and height of the building has a hierarchical structure within a buddhist temple site, this is applicable in Hwangnyongsa. So in case of a rank equal to or lower buildings than the west hall, those of platforms were built of brick-constructed. As stone relics, jidaeseoks are very narrow, I think that wooden pagoda and main hall's platform were built of brick in first construction period. West hall's platform was built at the late 6th~the mid of 7th century, these brick-remains were considered as a quite earlier construction period relics. Because in west hall there is no jidaeseok under bricks, and all bricks relics have a rectangular shape.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.744-754
• /
• 2015

동아시아에서 불사의 건립은 도성 및 궁궐과 더불어 가장 중요한 건축 활동 중의 하나로 인지되며, 특히 불탑은 부처의 사리를 모시는 상징적인 의미를 가진 불교건축의 가장 중요한 요소로서 불사의 중심에 위치하였다. 이에 본 연구는 안동 조탑리 오층전탑이 해체 보수 하고 있는 상황에서, 7-9세기 석탑의 내부구조체계를 통하여 전탑의 축조과정 등을 해석하고자 연구를 실시하였다. 그 결과, 첫째, 전탑의 파괴현상으로 측력으로 인한 밀림현상과 부재의 소성온도, 배합물질의 차이로 인한 부재의 파손을 들 수 있었다. 둘째, 전탑은 석탑과 같이 의장적인 부분과 구조적인 부분으로 구분되어 조영된 것을 알 수 있었다. 의장적인 부분은 가장자리에 있는 전으로 구성되며, 구조적인 부분은 가장자리 전과 내부 중심까지로 의장적인 전의 안쪽에는 완충공간 즉 상부하중이 수직으로 내려오면서 측력이 발생하는 것을 잡아주는 공간에 석재를 둔 것으로 분석되었다. 셋째, 내부중앙에 목주를 두어 전탑의 조영 시 중심축을 잡아주는 역할을 하였으며, 그 중심축은 찰주공의 하단까지 이어져 있었다. 넷째, 찰주공은 따로 내부 적심의 중앙에 따로 분리 축조하였다. 그리고 찰주공의 하단에는 찰주의 안착 및 위치선정, 뒤틀림보정을 위하여 구멍을 뚫어 놓았다. 이로 인하여 찰주는 자중으로 움직이지 않는 철재보다 목재로 설치하였을 가능성을 두었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.298-307
• /
• 2000

The behavior of a unreinforced cement brick building structure subjected to earthquake loading was experimentally investigated. for this four full size wall specimens were tested under quasi-static in-plane cyclic loading. Experimental observations indicate that the failure modes of unreinforced masonry walls are principally governed by sliding or/and rocking depending on the aspect ration and magnitude of axial loading. Also found was the flexure or shear mode resulting from the degraded strength of brick and/or mortar due to the cyclic loading effect.

• Earthquakes and Structures
• /
• 제6권2호
• /
• pp.181-199
• /
• 2014

The infill walls, whose contribution to the earthquake resistance of a structure is generally ignored due to their limited lateral rigidities, constitute a part of the lateral load bearing system of an RC frame structure. A common method for improving the earthquake behavior of RC frame structures is increasing the contribution of the infill walls to the overall lateral rigidity by strengthening them through different techniques. The present study investigates the influence of externally bonded perforated steel plates on the load capacities, rigidities, and ductilities of hollow brick infill walls. For this purpose, a reference (unstrengthened) and twelve strengthened specimens were subjected to monotonic diagonal compression. The experiments indicated that the spacing of the bolts, connecting the plates to the wall, have a more profound effect on the behavior of a brick wall compared to the thickness of the strengthening plates. Furthermore, an increase in the plate thickness was shown to result in a considerable improvement in the behavior of the wall only if the plates are connected to the wall with closely-spaced bolts. This strengthening technique was found to increase the energy absorption capacities of the walls between 4 and 14 times the capacity of the reference wall. The strengthened walls reached ultimate loads 30-160% greater than the reference wall and all strengthened walls remained intact till the end of the test.