Browse > Article
http://dx.doi.org/10.12989/eas.2014.6.2.181

Strengthening of hollow brick infill walls with perforated steel plates  

Aykac, Sabahattin (Civil Engineering Department, Gazi University)
Kalkan, Ilker (Department of Civil Engineering, Kirikkale University)
Seydanlioglu, Mahmut (Ministry of Environment and Urban Development)
Publication Information
Earthquakes and Structures / v.6, no.2, 2014 , pp. 181-199 More about this Journal
Abstract
The infill walls, whose contribution to the earthquake resistance of a structure is generally ignored due to their limited lateral rigidities, constitute a part of the lateral load bearing system of an RC frame structure. A common method for improving the earthquake behavior of RC frame structures is increasing the contribution of the infill walls to the overall lateral rigidity by strengthening them through different techniques. The present study investigates the influence of externally bonded perforated steel plates on the load capacities, rigidities, and ductilities of hollow brick infill walls. For this purpose, a reference (unstrengthened) and twelve strengthened specimens were subjected to monotonic diagonal compression. The experiments indicated that the spacing of the bolts, connecting the plates to the wall, have a more profound effect on the behavior of a brick wall compared to the thickness of the strengthening plates. Furthermore, an increase in the plate thickness was shown to result in a considerable improvement in the behavior of the wall only if the plates are connected to the wall with closely-spaced bolts. This strengthening technique was found to increase the energy absorption capacities of the walls between 4 and 14 times the capacity of the reference wall. The strengthened walls reached ultimate loads 30-160% greater than the reference wall and all strengthened walls remained intact till the end of the test.
Keywords
perforated steel plate; hollow brick infill wall; structural strengthening; earthquake behavior; reinforced concrete frame;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Frosch, R.J. (1996), "Seismic rehabilitation using precast infill walls", Ph.D Thesis, The University of Texas at Austin, Texas, U.S.A.
2 Frosch, R.J., Li, W., Jirsa, J.O. and Kreger, M.E. (1996), "Retrofit of non-ductile moment-resisting frames using precast infill wall panels", Earthq. Spectra, 12(4), 741-760.   DOI   ScienceOn
3 Ozbek, E. and Can, H. (2012), "Dolgu tugla duvarlarin celik profillerle guclendirilmesi", J. Fac. Eng. Archit. Gazi Uni., 27(4), 921-929. (in Turkish)
4 Kahn, L.F. (1984), "Shotcrete retrofit for unreinforced brick masonry", Proceedings of 8th World Congress on Earthquake Engineering, San Francisco, CA, USA, July.
5 Marjani, F. and Ersoy, U. (2002), "Behavior of brick infilled reinforced concrete frames under reversed cyclic loading", Proceedings of the ECAS2002 International Symposium on Structural and Earthquake Engineering, Middle East Technical University, Ankara, Turkey, October.
6 Ozcebe, G., Ersoy, U., Tankut, T., Erduran, E., Keskin, R.S.O. and Mertol, H.C. (2003), "Strengthening of brick infilled RC frames with CFRP", SERU-Structural Engineering Research Unit, Report No. 2003/1, TUBITAK-METU, Ankara, Turkey.
7 Papanicolaou, C.G., Triantafillou, T.C. and Lekka, M. (2011), "Externally bonded grids as strengthening and seismic retrofitting materials of masonry panels", Construct. Build. Mater., 25(2), 504-514.   DOI
8 Papanicolaou, C.G., Triantafillou, T.C., Karlos, K. and Papathanasiou, M. (2007), "Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading", Mater. Struct., 40(10), 1081-1097.   DOI
9 Papanicolaou, C.G., Triantafillou, T.C., Papathanasiou, M. and Karlos, K. (2008), "Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: Out-of-plane cyclic loading", Mater. Struct., 41(1), 143-157.
10 Sayin, B. and Kaplan, S.A. (2005), "Deprem etkisi altindaki betonarme yapilarda dolgu duvarlarin modellenme teknikleri", Earthquake Symposium, Kocaeli, Turkey, August. (in Turkish)
11 prEN 1998-1:2003 (2003), Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings, European Committee for Standardization (CEN), Brussels.
12 Prota, A., Marcari, G., Fabbrocino, G., Manfredi, G. and Aldea, C. (2006), "Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix-grid composites", J. Compos. Construct. - ASCE, 10(3), 223-233.   DOI   ScienceOn
13 Saneinejad, A. and Hobbs, B. (1995), "Inelastic design of infilled frames", J. Struct. Eng. - ASCE, 121(4), 634-650.   DOI   ScienceOn
14 Sevil, T., Baran, M., Bilir, T. and Canbay, E. (2011), "Use of steel fiber reinforced mortar for seismic strengthening", Construct. Build. Mat., 25(2), 892-899.   DOI
15 Taghdi, M., Bruneau, M. and Saatcioglu, M. (2000a), "Seismic retrofitting of low-rise masonry and concrete walls using steel strips", J. Struct. Eng. - ASCE, 126(9), 1017-1025.   DOI   ScienceOn
16 Vandergrift, J., Gergely, J. and Joung, D.T. (2002), "CFRP retrofit of masonary walls", Proceedings of the 3rd International Conference on Composites in Infrastructure (ICCI 02), San Francisco, CA, USA, June.
17 Taghdi, M., Bruneau, M. and Saatcioglu, M. (2000b), "Analysis and design of low-rise masonry and concrete walls retrofitted using steel strips", J. Struct. Eng. - ASCE, 126(9), 1026-1032.   DOI   ScienceOn
18 Triantafillou, T.C. (1998), "Strengthening of masonry structures using epoxy-bonded FRP laminates", J. Compos. Construct. - ASCE, 2(2), 96-104.   DOI   ScienceOn
19 Triantafillou, T.C. and Papanicolaou, C.G. (2006), "Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets", Mater. Struct., 39(1), 93-103.
20 Triantafillou, T.C., Papanicolaou, C.G., Zissimopoulos, P. and Laourdekis, T. (2006), "Concrete confinement with textile-reinforced mortar jackets", ACI Struct. J., 103(1), 28-37.
21 Xingke, F. (2008), "Investigation on the influence of infilled wall on the seismic performance of reinforced concrete frame structures", M.E. Thesis, Lanzhou University of Technology, Lanzhou, Gansu, China.
22 ASTM E519/E519M-10 (2010), Standard test method for diagonal tension (shear) in masonry assemblages, American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A.
23 Amanat, K.M., Alam, M.M.M. and Alam, M.S. (2007), "Experimental investigation of the use of ferrocement laminates for repairing masonry in filled RC frames", J. Civil Eng. (IEB), 35(2), 71-80.
24 Acun, B. and Sucuoglu, H. (2005), "Tugla dolgu duvarli cercevelerin hasir donati ile guclendirilmesi", Earthquake Symposium, Kocaeli, Turkey, August. (in Turkish)
25 Alcocer, S.M., Ruiz, J., Pineda, J.A. and Zepeda, J.A. (1996), "Retrofitting of confined masonry walls with welded wire mesh", 11th World Conference on Earthquake Engineering, Acapulco, Mexico, September.
26 Altin, S., Anil, O., Kara, M.E. and Kaya, M. (2008), "An experimental study on strengthening of masonry infilled RC frames using diagonal CFRP strips", Compos. Part B: Eng., 39(4), 680-693.   DOI   ScienceOn
27 ElGawady, M.A., Lestuzzi, P. and Badoux, M. (2006), "Retrofitting of masonry walls using shotcrete", Proceedings of New Zealand Society for Earthquake Engineering Conference, Napier, New Zealand, March.
28 Baran, M. and Tankut, T. (2011), "Experimental study on seismic strengthening of RC frames by precast concrete panels", ACI Struct. J., 108(2), 227-237.
29 El-Dakhakhni, W.W., Hamid, A.A., Hakam, Z.H.R. and Elgaaly, M. (2006), "Hazard mitigation and strengthening of unreinforced masonry walls using composites", Compos. Struct., 73(4), 458-477.   DOI   ScienceOn
30 Erdem, I., Akyuz, U., Ersoy, U. and Ozcebe, G. (2006), "An experimental study on two different strengthening techniques for RC frames", Eng. Struct., 28(13), 1843-1851.   DOI   ScienceOn
31 Farooq, S.H., Ilyas, M. and Ghaffar, A. (2006), "Technique for strengthening of masonry wall panels using steel strips", Asian J. Civ. Eng., 7(6), 621-638.
32 FEMA 306 (1998), Evaluation of earthquake damaged concrete and masonry wall buildings, Federal Emergency Management Agency, Redwood City, California, U.S.A.
33 Korkmaz, S.Z., Kamanli, M., Korkmaz, H.H., Donduren, M.S. and Cogurcu, M.T. (2010), "Experimental study on the behaviour of nonductile infilled RC frames strengthened with external mesh reinforcement and plaster composite", Nat. Hazards Earth Syst. Sci., 10, 2305-2316.   DOI
34 Topcu, I.B., Isikdag, B., Tatar, O. and Abi, E. (2005), "Depremde hasar gormus binalarin ferrocement panellerle guclendirilmesi", Earthquake Symposium, Kocaeli, Turkey, August. (in Turkish)