• Journal of architectural history
• /
• v.19 no.6
• /
• pp.99-120
• /
• 2010

According to it, a final goal of this study sets up 'Renovation of the Red brick architecture' and development of theoretical foundation and substantial conservation about Red brick architecture through historical records must be settled without delay. Firstly, it analyzes related terminology and adjusts brick architecture's history and features for architectural authenticity about Red brick architecture. It would study production and construction process of brick in korea. From analysis of records, brick of traditional meaning is 'Jeondol' and western brick of modern meaning is 'Red brick'. 'Brick' defines a common designation. This study shows definition of words based on documents published until 19th century and a korean language and architecture terms dictionary. In view of this results, the meaning of brick which combines different types extensively uses 'Chu', 'Jeon', 'Byeok' according to the purpose of use and the current of the times. In case of 'Jeon', it uses jointly different types such as '塼', '磚', '甎'. but '塼' is frequently used. Even though these words like 'byeok' used individual or combination types until the late 19th century, there is no use because of japanese terms in japanese colonial. After liberation, it was the term of the traditional brick. Brick is generally used through modern times. In an unabridged Korean language dictionary, it defines this term as orthodox korean '壁乭' and '?乭'. At that time of japanese colonial, 'Yeonwa(煉瓦)' used in combination with brick. Due to influence it, it partly uses until now but it is not in common use. Also, a Korean language dictionary contains transcription of 'Yeonwa' with same definition as 'Byeokdol'. In the other side, it results from translating japanese into Korean. It would make exact definition of 'Yeonwa'.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.23-24
• /
• 2011

The purpose of this study is suggesting a basic data for which scientific preservation and rehabilitation of future modern architecture through the analyzing property of clay brick used in modern architecture in a scientific way.The clay brick which is used in the early 1900s has even lower property than present clay brick because of poor plasticity technique at that time. It could be possible to property and effective stability examination of modern architecture from nondestructive testing is significantly associated with property.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.163-171
• /
• 2017

Brick is not only aesthetically beautiful and emotional material, but also eco-friendly and good building commodity for human health. Nonetheless, the use of brick has declined, due to the difficulty of building high-rise buildings and the limitation of the free form implementation. However, modern society is increasingly interested in environmentally friendly finishing materials for solving environmental problems. From this point of view, the brick architecture is being reexamined as a material to improve the living environment and to provide comfort without destroying nature. In addition, the development of digital technology enables the implementation of various types of masonry method and curved forms. Parametric design is one of the ways to realize the curved forms and various architectural expressions for brick architecture. In this background, the purpose of this study is to develop algorithms that can easily generate curved brick walls through parametric design, enable various pattern designs, and respond to real-time feedback. The details of the study are as follows. First of all, we examine organic architecture, the trend of brick architecture, and the concept of parametric design. Secondly, In order to generate curved surface with complex curvature, major planning factors affecting form generation are examined. Finally, we develop a parametric design method that consists of generating a curved surface for brick arrangement, implementing a parametric algorithm, and generating a curved form using bricks. Consequentially, we propose an algorithm that can maximize the use of ready-made bricks without using cut bricks to design curved walls and present efficient and economical design alternatives.

• Journal of the Korean Institute of Rural Architecture
• /
• v.7 no.1
• /
• pp.51-60
• /
• 2005

In Korea, there still exist a number of modern architectural structures which were built from 1876 - when Korea first opened its port to foreign trade - to the early 1960s. Modern architectures have been rather neglected from the study of Korean architecture history partly because of its short period and negative attitude toward them that they are remains of the Japanese colonial period. However, interest in modern structures is recently increasing, and researches and studies are actively going on. This dissertation is a study on brick laying techniques and design characteristics of Modern brick structure churches in Jeonbuk-province. The results demonstrate that modern brick structure churches in Jeonbuk-province have become small and simple with time and that their structures and designs are closely related.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.5
• /
• pp.468-477
• /
• 2012

This study aimed to mix and test mortar incorporating activated Hwangtoh to improve the Hwangtoh brick bond strength of brick structures. To do this, the bond strength correlation of mortar was analyzed by means of materials and experiment factors and levels, and the optimum conditions were suggested after analyzing the physical properties of brick and the mix ratio of mortar and additive. Furthermore, the compressive strength and bond strength were found to be in inverse proportion, and in terms of the materials and mixing level, W/C ratio, substitution ratio of activated Hwangtoh, and fine aggregate grading were shown to have a considerable influence on the strength. In conclusion, the optimum mixing conditions to improve the bond strength are found to set W/C ratio at 65% and replacmenet ratio of activated Hwangtoh at 10%.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.1
• /
• pp.29-37
• /
• 2013

In this study, a zero-cement brick is manufactured by replacing cement with recycled aggregates and blast furnace slag powder. Experimental tests were conducted with standard sized samples of $190{\times}57{\times}90mm$ (KS F 4004), and this manufacturing technique was simulated in practice. Results showed that the zero-cement brick with 0.35 W/B had the highest compressive strength, but the lowest absorption ratio. This absorption ratio of zero-cement brick with 0.35 W/B was lower than the required level determined by KS F 4004. Hence, to increase the absorption ratio, crushed fine aggregate (CA) and emulsified waste vegetable oil (EWO) were used in combination in the zero-cement brick. It was found that the zero-cement brick with CA of 20% and EWO of 1% had the optimum combination, in terms of having the optimum strength development (12 MPa) and the optimum absorption ratio (8.4%) that satisfies the level required by KS. In addition, it is demonstrated that for the manufacturing of zero-cement brick of 1000, this technique reduces the manufacturing cost by 5% compared with conventional cement brick.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.744-754
• /
• 2015

Buddhist temple construction at East Asia is considered one of the most important architecture activities together with the capital city and palace, where the pagoda is positioned at the center of a Buddhist temple as the most important element of Buddhist architecture enshrining Buddha's Sary. Accordingly, this study was performed to examine the procedure of how to build brick pagodas through the stone pagoda's internal structure between $7^{th}{\sim}9^{th}$ century while disassembling and repairing Andong Jotap-ri five-story brick pagoda. As a result, as the brick pagoda destruction phenomenon, there was a slip phenomenon by side forces, member's plastic temperature, and mixed material differences. Second, like a stone pagoda, brick pagoda is classified and constructed by the design and structural parts. According to the analysis, the design part is formed by the most edge brick, and the structure part places stone material at the buffer zone in the design brick from most edge brick and intra-center, i.e., at the space to support a side force while the top weight is vertically led. When building a brick pagoda, putting a wood pole at inside center plays the role as holding parts. In addition, the center axis is connected to the bottom of the steel pole hole, A steel pole hole has holes to safely settle down and decide the position. Because of them, the steel pole is self-loaded, which may be installed by wood rather than immovable steel.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.1
• /
• pp.37-44
• /
• 2011

The maintenance works for brick-structured buildings are a new field in Korea, and practical cases are yet inadequate so that such works may cause adverse effects of damaging the buildings after all. Therefore, this study has extracted a preservation technology believed to be most desirable in minimizing the damage to the original state of the buildings and preserving the value as the cultural assets through maintenance work details from 1986 to 2010 regarding brick-structured buildings designated as cultural properties. Firstly, a brick replacement method of using the brick used at the time of construction is efficient in replacement and repair of brick material for preserving value of cultural assets and minimizing damage of the original form. Secondly, use of lime mortar through material analysis is effective in repair of masonry joint and mortar but it is not used often due to high experimental cost. Finally, reinforcement of structure using a form for a building with severe damage is most efficient when considering additional problems. However, damage on the original form of a building can be minimized and value of a building can be preserved only when consideration on sufficient case analysis, materials to be used, and conditions of a building is supported.

• Journal of the Korean housing association
• /
• v.15 no.1
• /
• pp.25-32
• /
• 2004

The purpose of this study is to understand the indoor thermal environment in the earth brick wall building what is called a ecological Architecture. To investigate thermal performances of the earth brick walls, it measured indoor and outdoor air temperature, relative humidity, globe temperature and PMV in reference house. The result of this study were summarized as the followings; 1) When the outdoor average air temperature was $21.8^{\circ}$, livingroom was $24.9^{\circ}$, kitchen was $25.1^{\circ}$ and 2nd floor room was $25.6^{\circ}$ at 150 cm height from the floor. 2) Although the average outdoor relative humidity was 78%, the livingroom was 67.5%. 3) As the air temperature difference between at the top and bottom was $0.6^{\circ}$ in living room, this value was below 1 % of PPD by ASHRAE Handbook. 4) Predicted Mean Vote(PMV) by ISO-7730 was +0.41.

• Korean Institute of Interior Design Journal
• /
• v.21 no.3
• /
• pp.67-75
• /
• 2012

This Study is concerned with the Design Characteristics of Korean, Chinese and Japanese brick church architecture. The main subject of the study is to investigate the commonness and difference between Korean, Chinese and Japanese brick church architecture in the early stage(1880-1920). In carrying this study into execution, I examined the architectural and historical backgrounds based on the preceding research works, and analysed the plan, the spacial composition, design elements, techniques and materials, etc. The result of this study is as follows ; The basic concept of composition of space is same in order to embody the Basilican space, but the inner elevation and detail of brick structure is different. Chinese churches are more close to Western basilican style church in the point of shape and plan, but in the point of inner elevation and decoration of church, Japanese churches are more close to Western style church. Korean churches are in the middle of its. There are different attitudes of naturalization of western church architecture in Korea, China and Japan.