• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.220-226
• /
• 2001

It is important to estimate exactly wave forces acting on various types of offshore structures under the severe environmental conditions in the ocean site. This paper presents an easy experimental method which deals with transient waves. The proposed scheme made it possible to generate breaking waves at any position in the wave tank by changing the maximum slope of the component waves. The theoretical and experimental methods were investigated by generating concentrated waves which acted on a single and multiple cylinders. The waves forces increased rapidly when the models encountered breaking waves. The theoretical results underestimates the forces due to breaking waves. Therefore, the effects due to breaking waves should be considered carefully in the design process of a structure under the influence of breaking waves.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.8-13
• /
• 2001

It is important to estimate exactly wave forces acting on various types of offshore structures under the severe environmental conditions in the ocean site. This paper presents an easy experimental method which deals with transient waves. The proposed scheme made it possible to generate breaking waves at any position in the wave tank by changing the maximum slope of the component waves. The theoretical and experimental methods were investigated by generating concentrated waves which acted on a single and multiple cylinders. The waves forces increased rapidly when the models encountered breaking waves. The theoretical results underestimates the forces due to breaking waves. Therefore, the effects due to breaking waves should be considered carefully in the design process of a structure under the influence of breaking waves.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.328-333
• /
• 2023

Breaking the fourth wall is a very popular concept right now, and depictions of breaking the barrier between virtuality and reality are often used in game advertising. In VR games, game manufacturers describe the experience after breaking the fourth wall as an experiencer who will be completely immersed in the virtual world, as if they are actually living in the virtual world. At the same time, research in the field of traditional drama also shows that breaking the fourth wall can also bring a sense of alienation to the player, allowing the experiencer to clearly realize that he and the character are in a completely different world, and to conduct aesthetic criticism of related works of art.So why there are two completely different feelings after breaking the fourth wall will be the content of this article. This article will focus on the theoretical analysis of the relationship between two different cognitions and two completely different cognitions after breaking the fourth wall. Finally, it will be analyzed from three directions: game perspective, game art style, and different world views of the game. Finally, it was concluded that when players break the fourth wall in the game, these three factors will cause the experiencer to have two completely different cognitions.

• Journal of muscle and joint health
• /
• v.29 no.2
• /
• pp.133-140
• /
• 2022

Purpose: This study was to examine the effects of auricular acupressure on competitive state anxiety and the accuracy of breaking in taekwondo players. Methods: This study was a quasi-experimental study with a time-series design. Twenty-two taekwondo breaking players were assigned to the control group for the first two weeks and then assigned to the experimental group for the next two weeks. Anxiety was measured by the revised Competitive State Anxiety Inventory-2 and the accuracy of breaking was measured as a percentage of breaking the wooden board. Results: Auricular acupressure for two weeks significantly increased the accuracy of breaking from 80.83±7.99% to 90.92±7.57% (t=7.74, p<.001). Auricular acupressure for two weeks significantly increased anxiety from 35.66±10.36 to 50.64±7.45 (t=4.38, p<.001). Among three subtypes of competitive state anxiety, somatic anxiety was increased from 12.48±4.97 to 22.95±4.54 (t=2.09, p=.011). Cognitive anxiety was significantly increased from 10.11±3.96 to 14.68±3.89 (t=5.37, p<.001) but self-confidence was not changed. Conclusion: The results of this study showed that auricular acupressure was effective in increasing the accuracy of breaking in taekwondo players.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.4
• /
• pp.145-151
• /
• 2005

The synthetic breaking test method was developed to evaluate the breaking performance of ultra high-voltage circuit breaker and made up of two independent circuits; current source circuit and voltage source circuit. In application of this test method, it is necessary to extend the arc of the test breaker. So, the new re-ignition system using VTGS (Vacuum Triggered Gap-Switch) was constructed to improve the efficiency and reliability of this test. In this re-ignition system, VTGS operates in high vacuum state of $5{\time}10^{17}$torr and control system consists of the triggering device and the air M-G (Motor-Generator). This re-ignition system showed the operating characteristics, such as delay time ($t_d$) and jitter time ($t_j$ not exceeding 5us and 1us respectively, and had the operating voltage of $25\~150kVdc$ at the gap distance of 24mm.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.181-186
• /
• 1999

For an unmanned machining system, the control and disposal of chips is one of the most serious problems at present. In order to perform chip control, feed/land length($F_L$) was introduced, and using this parameter, the cutting performance and chip breaking characteristics of groove-type and the land -angle-type chip formers were assessed. The specific cutting energy consumed and the shape of broken chips with its breaking cycle time were evaluated to find out the ranges of $F_L$ value where efficient cutting and effective chip breaking could be achieved. The C type chip was found to be the most preferable from the view point of cutting efficiency.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.12-14
• /
• 2002

In this paper, magnetic force on acting arc was analyzed by 3-D FEM for three DC arc-quenching rooms having different magnetic flux paths. We measured arc breaking time in prototypes by experiment so that we compared the relation of magnetic force and arc breaking time. Finally, we present the techniques for magnetically-driven arc and for the prediction of arc breaking time.

• Journal of Aquaculture
• /
• v.17 no.3
• /
• pp.173-179
• /
• 2004

The quality of cultured fish was evaluated in this study by using physicochemical method. The speed of a current was taken a decision 0.5 m/s by a preliminary experiment. No-exercise trained group was not much significantly changed moisture content, lipid content, collagen content and breaking strength during cultured time (P＞0.05). But moisture content of exercise trained group was 72.05$\pm$1.45% at the first time and increased to 3% after 20 days. Lipid content was initially 5.36$\pm$0.90% and reduced to 46% during the cultured time. The breaking strength increased during cultured time, on the contrary collagen content did not change significantly. Relation between each elements during the cultured time, moisture content and lipid content was significantly correlated with breaking strength (P＜0.05, r=0.60 and P＜0.05, 0.56). But relation between breaking strength and collagen content was not clear (P＞0.05, r=0.16). These results were suggested that the increase of breaking strength after exercise was affected by lipid content not collagen content.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.50-61
• /
• 1996

The breaking phenomenon of regular periodic waves generated by a numerical wave maker is simulated by finite-difference method which can cope with strong interface motions. The air and water flows are simultaneously solved in the time-marching solution procedure for the Navier-Stokes equation. A density-function technique is devised for the implemenation of the interface conditions. The accuracy is examined and applied to the simulation of two-dimensional breaking phenomena of periodic gravity waves.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.6
• /
• pp.1-6
• /
• 2003

Wave energy dissipation and energy transfer between wave components, during the directional wave breakings, are investigated. Directional incipient and plunging breakers were generated by focusing the multi-frequency and multi-directional wave components at a designed location, based on a constant wave amplitude and a constant wave steepness frequency spectrum. The time series of surface wave elevation was measured at 9 different locations around the wave focusing point, using a wave gauge array. In order to examine the variation of the directional spreading function, the horizontal velocity of fluid motion was also measured. By comparing energy spectrums, before and after the breaking, the characteristics of energy dissipation and energy transfer, caused by wave breaking, are investigated. Their dependencies on directionality, as well as frequency, are analyzed. The breakings significantly dissipate wave energy, through energy transfer, in the upper region of the peak-frequency band, while enhancing wave energy in the low-frequency band.