• Fashion & Textile Research Journal
• /
• v.18 no.1
• /
• pp.113-119
• /
• 2016

The evolution of spinning technology was focused on improving productivity with good quality of yarns. More detail spinning technology according to mixing of various kinds of fibre materials on the air vortex spinning system is required for obtaining good quality yarns. This paper investigated the physical properties of air vortex yarns compared with ring and compact yarns using PTT/tencel/cotton fibres. It was observed that unevenness of air vortex yarns was higher than those of ring and compact yarns, which resulted in low tenacity and breaking strain of air vortex yarns. Initial modulus of air vortex yarns was higher than those of ring and compact yarns. Yarn imperfections of air vortex yarns such as thin, thick and nep were much more than those of ring and compact yarns. These poor yarn qualities of air vortex yarn were attributed to the fasciated yarn structure with parallel fibres in the core part of the air vortex yarn. However, yarn hairiness of air vortex yarns was less and shorter than those of ring and compact yarns. Thermal shrinkage of air vortex yarns were higher than that of ring yarns, which was caused by sensible thermal shrinkage of PTT fibres on the bulky yarn surface and core part of air vortex yarns.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.1
• /
• pp.83-90
• /
• 2008

Taekwondo is a martial art form and sport that uses the hands and foot for attack and defense. Taekwondo basic motion is composed of the breaking, competition and poomsea motion. In the side kick among the competition motion, the impact force is larger than other kinds of kicks. The side kick with the front foot can be made in two steps. In the first step, the front foot is stretched forward from back stance free-fighting position. For the second step, the rear foot is followed simultaneously. Then, the kick is executed while entire body weight rests on the rear foot. In this paper, impact analysis of the human model for hitting posture is carried out. The ADAMS/LifeMOD is used in hitting modeling and simulation. The simulation model creates the human model to hit the opponent. As the results, the dynamic analysis of human muscle were presented.

• Journal of Nutrition and Health
• /
• v.32 no.1
• /
• pp.3-9
• /
• 1999

This study examined the effect of dietary lipids and ovariectomy(OVX) on bone mass in rats. The experimental animals were divided into sham operation(S) or OVX(O) groups and then each group was divided into soybean oil(SS, OS), beef tallow(SB, OB), and fish oil(SF, OF) diet group. Experimental diets were fed for 16 weeks. Weight gain tended to be higher in OVX groups than in sham groups. Weigth gain was the highest in beef tallow group (SB) and the lowest in fish oil group(SF). There were no difference in weight, length, breaking force, strength and circumference of femur mong groups. However, volume of femur tended to be higher in OVX groups than in sham groups. Ash content of femur was significantly lower in OVX than sham groups but there were no difference between SB and OB group. Ca content in the soybean oil and beef tallow group were not influenced by OVX but Ca content in fish oil group was significantly higher in OF than SF group. The SB group showed the hyighest Ca content and the SF group showed the lowest Ca content. P content of femur was significantly lower in OVX groups than in sham groups but there were no difference between SB and OB group. The SS group showed the highest P content and the OS and OF group showed lower P content compare to other groups. From this result, it suggested that beef tallow positively influenced maintenance of bone mass by means of accumulation of body fat in ovariectomy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.173-180
• /
• 1992

A feature typical of natural rivers is the bend. The purpose of this study is to examine hydraulic and morphometric characteristics in channel bend reach by the deterministic approach. Cross section shape factor, "As" is suggested for a new cahracteristic factor of channel bend reach analysis. The variation of this new factor along the river reach showed the location of the concentration of the force due to the current all over the reach, that is curved or not. Some general meander factors are used for correlation with new factor suggested, and the applicability of "As" is verified. The range R/W values are concentrated 2~4, the meanning of this value can be regarded to the warning for bank erosion or breaking. And this paper dealt with prediction of cross section bed shape variation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.169-176
• /
• 2001

The sediment at the majority of fishery harbors located on the east coast of Korea are affccted by the waves and wave-induced currents as the main external force. And the surroundings of the harbors are composed of sandy beaches. Because many harbors are small and their entrances are located in the wave¬breaking zone, they suffer severe siltation and topographical changes. In order to solve the problems, we have to understand the mechanism through estimations and accurate reproduction of the harbor siltation phenomenon. We suggest economically substantial countermeasures for harbor siltation in the small fishery harbors and investigate the preventive effects using a numerical simulation technique.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.787-791
• /
• 2015

In some cases which are unable to replace the inserts when the depot maintenance or performance improvement of armored vehicles are carried out could have a risk of declining clamping forces by re-processing chromate. The change in the clamping forces of inserts has been investigated by applying a chromate process to hold the insert on the aluminum plate of the armored vehicle in this paper. In order to identify the effect of types and surface treatment, the breaking strength has been measured by the equivalent test item to the actual conditions. These tests would contribute the establishment of the armored vehicle production process.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.99-106
• /
• 2000

In order to investigate the applicability of lyocell fiber to filter paper, papper sheets were manufactured with the addition of lyocell fibers in various length(1.5 denier: 2, 3, 4mm) and content(10, 30, 50%) and their physical characters, such as fibrilation rate, adsorption efficiency of methylene blue(MB), paper formation, and crimping ability, etc, were tested. The level of main fibrilation from lyocell fiber was higher in wet beating process than that in free beating because of the higher strength of lyocell fiber compared with wood fiber. Fibrilation could be observed at the degree of beating over 30$^{\circ}$ SR in wet beating with Valley beater. The air permeability and tear factor of the paper increased and the paper formation index decreased according to the increase of fiber length. The weak binding force of lyocell fiber in spite of its higher fiber strength, might be a limitng factor in addition of lyocell fiber to the natural wood pulp in manufacturing the paper having the needed physical properties. High contents of wood pulp decreased air permeability, the breaking length, tear factor, the bursting strength, and paper formation index in paper sheets. As the contents of lyocell increased from 10% to 100%, the adsorption efficiency of MB was elevated to 1.7-7.9 times compared with that in 100% wood pulp. But the length of lyocell fiber did not affect the MB adsorption.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.257-257
• /
• 2011

The amorphous indium-gallium-zinc-oxide (a-IGZO) materials for use in high performance display research fields are strongly investigated due to its good performance, such as high mobility and better transparency. However, the stability of a-IGZO materials is increasingly becoming one of critical issues due to the sub-gap electron trap sites induced by rough interfaces during deposition processing. It is well-known that the threshold voltage shift is related to interface roughness and oxygen vacancy formed by breaking weak chemical bonds. Here, we report the better properties of transparent oxide transistors by reducing the threshold voltage shift with an external rf plasma supported magnetron sputtering system. Mainly, our sputtering method causes the surface of sample to be sleek, so that it prevents the formation of various defects, such as shallow electron trap sites in the interface. External rf power was applied from 0 to 50W during RF sputtering process to enhance the stability of our oxide transistor without having a large voltage shift. To observe the effects of external rf-plasma source on the properties of our devices, Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM) are carried out to observe surface roughness and morphology of sputtered thin film. In addition, typical electrical properties, such as I-V characteristics are analyzed.

• The Journal of Korean Physical Therapy
• /
• v.11 no.3
• /
• pp.37-44
• /
• 1999

Delayed onset muscle soreness is a sensation of discomfort that occurs 24h after exercise, and it is associated with the performance of unfamiliar and high force muscle wor, such as eccentric contractions. The injury to the muscle has been well described but the mechanism underlying the injury is not fully understood. Although the pathophysiological processes underlying delayed onset muscle soreness are not completely understood, many researchers have investigated various treatments in a attempt to reduce the soreness. These treatments have focused on reducing the inflammation, or edema, consequent to tissue damage, and breaking up the cycle which is thought provoke tonic muscle spasm or pain. Physical therapy is the most importance thechniques to reduce delayed onset muscle soreness. Physical therapy on delayed onset muscle soreness includes massage, exercise, therapeutic ultrasound, TENS, stretching and cryotherapy, this investigation should encourage physical therapists to experiment further with various techniques to reduce delayed onset muscle soreness.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.1
• /
• pp.54-63
• /
• 1997

The purpose of this study is to analyse deformation properties by carrying out of flexure experimentations after fabricating polymer concrete sandwich panels which are composed of the polymer concrete in facing and expanded polystyren in cores, and to provide the basic data necessary to design, fabricate and operate the structure using these polymer concrete sandwich panels The analysed result of this study is summarized as follows. 1. The result of experiment on flexural deflection indicated that the thicker the thickness of both cores and facing of the polymer concrete sandwich panels, the smaller the deflection but the larger the ultimate shear force. In addition, it was also shown that the thicker the thickness of these cores and facing, the smaller the increasing rate of the deflection with the increase of load. 2. The breaking shape of polymer concrete sandwich panels by experiment on flexure was different according to the thickness of facing. When the facing was 5mm in thickness, it was the flexure while it was the flexure and shear failure when the facing was 5mm in thickness. As a result, it seems that the thickness of the facing has a great effect on failure. 3. There were induced not only the related formula between load, deflection and deformation according to the thickness of cores and facing on the basis of the flexure experiment, but also formula between load, horizontal displacement, Then, it seems that it will be possible to estimate the above elements by using these related formulas.