• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.246-249
• /
• 2004

When MWK (Multiaxial Warp Knitted Fabric) composites are applied for the structures, the connections of each component using mechanical fastening is needed. The local contact between the bolted joint and the composite laminates may induce high stress concentration or breakdown in the laminates for the mechanical joints. There for, it is strongly required to study the characteristics of mechanically joints of MWK composite laminates. In this study, stress analysis near the hole boundary of MWK composite laminate is conducted with various geometric factors under different loadings. In the case of multi-pin loaded MWK composite laminates, the results show that the types of loadings and geometric factors of mechanical joints have a significant influence on the joint performances.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.11-17
• /
• 1999

Aging characteristics of the crosslinked polyethylene have been measured after applying electrical, thermal and combined stresses. ICP and FT-IR measurements confirmed diffusion of low molecular weight components such as antioxidant and presence of carbonyl group. Carbonyl group of aged crosslinked polyethylene under combined stress was detected by FT-IR. As deterioration of the crosslinked polyethylene progresses, crystallinity degree and density decrease. Also, dielectric properties have been measured by tan $\delta$ and $\varepsilon$$_{r}$ measurements. The three-parameter Weibull distribution was found to be the best suited among other probabilistic distribution representing the dielectric breakdown strength of aged crosslinked polyethylene. The scale parameter and location parameter decreases as the applied stress increases. The shape parameter increases as the stress increases.s.

• Preventive Nutrition and Food Science
• /
• 제9권3호
• /
• pp.253-258
• /
• 2004

Stress is a global menace exacerbated by the advancement of industrialization. Failure of stress management is to a breakdown of the psychological and physiological protection mechanisms against stress. The aim of present study was to investigate the anti-stress potential of ginseng against immobilization stress. Male Sprague-Dawley rats (n=24) were divided into three groups; (i) control, (ii) immobilization stress (2hr daily, for 2 weeks), and (iii) immobilization stress (2 hr daily, for 2 weeks) plus oral administration of ginseng (200 mg/kg BW Id). Immobilization stress resulted in a significant inhibition of body weight gain by 45 % and a significant decrease in the tissue weights of thymus and spleen (p < 0.05). The concentrations of blood GOT and GPT were significantly increased in the immobilization-stressed group compared to the control group (p < 0.05). There were no differences in the blood cholesterol levels among groups. Ginseng administration in the immobilization-stressed group tended to reverse the lack of body weight gain and food intake, though not significantly. The ginseng-administered group showed a significant reversal in the stress-induced effect on spleen and thymus weight, increasing the tissue weights by 16% and 20%, respectively, compared to immobilization-stressed group (p<0.05). The plasma corticosterone level was significantly increased in the stressed group by 39 % compared to the control group (p<0.05), but ginseng administration significantly reversed the stress-induced increase in plasma corticosterone by 15 % compared to the immobilization-stressed group. The present study suggests that the anti-stress effect of ginseng is mediated by normalization of stress-induced changes in the circulating hormones and a reversal of tissue weight loss, thereby returning the body to normal homeostasis.

• 터널과지하공간
• /
• 제5권3호
• /
• pp.251-265
• /
• 1995

One of the most important matters in stress measurement by hydraulic fracturing technique is the determination of the breakdown pressure, reopening pressure, and shut-in pressure, since these values are the basic input data for the calculation of the in-situ stress. The control of the fracture propagation is also important when the hydraulic fracturing technique is applied to the development of groundwater system, geothermal energy, oil, and natural gas. In this study, a laboratory scale hydraulic fracturing device was built and a series of model tests were conducted with cube blocks of Machon gabbro. A new method called 'flatjack method' was adopted to determine shut-in pressure. The initial stress calculated from the shut-in pressure measured by flatjack method showed much higher accuracy than the stress determined by the conventional method. The dependency of the direction of fracture propagation on the state of the initial stresses was measured by introducin g artificial slots in the borehole made by water jet system. Numerical modeling by BEM was also performed to simulate the fracture propagation process. Both results form numerical and laboratory tests showed good agreement. From this study which provides the extensive results on the determination of shut-in pressure and the control of fracture propagation which are the critical issue in the recent hydraulic fracturing, it is conclued that in-situ stress measurement and the control of fracture propagation could be achived more accurately.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.132-135
• /
• 1990

This paper presents prediction of insulation lifetime in stress. Essentially, Epoxy resin, when it was subjected to different types of aging condition, produced to varieties of electrical properties and lifetime using spectroscopy and breakdown test. The relationships between the structural and electrical changes of aged epoxy were Investigated.

• 한국세라믹학회지
• /
• 제29권7호
• /
• pp.572-576
• /
• 1992

Dielectric constant of ferroelectric ceramics with poling is important in relation to the mechanism of dielectric breakdown. From the research about the dielectric constant variation with poling in tetragonal and rhombohedral phase PZT ceramics, it is known that the dielectric constant after poling is determined by competing effects between increasing effects (compressive stress induced by electrostriction of piezoelectric effects) and decreasing increase in large grain size with poling is smaller than in small grain size.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.349-352
• /
• 2007

It is impossible to database(DB) the patterns of cable events and cause analysis of faulted cable because the product liability(PL) law have been enforced in Korea, since 2002. In additions, simulation and pattern of cable events are needed for DB system under accelerated deterioration. In this paper, we tested for resistance to nicking of cable below the 22.9kV class due to thermal stresses. This method of exam is following IEC 60811-3-1(Common test methods for insulating and sheathing materials of electric cables). First of all, set the cable in the thermal stress instrument, temperature changed from -20 degree to 120 degree. After thermal stress, we observed a surface crack of cable through microscope and carried out AC withstand voltage test.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.348-352
• /
• 2014

In light of the sure protection function, the most important factors of a varistor are the clamping voltage ratio and degradation characteristics. The degradation characteristics of Pr/Co/Cr/Er co-doped zinc oxide varistors were investigated by impulse currents (0.4~2.1 kA) stress for the specified content of $Er_2O_3$ (0.5 and 2.0 mol%). The varistor doped with 2.0 mol% $Er_2O_3$ exhibited the best clamp characteristics, with the clamp voltage ratio (K) in the range of K = 1.63~1.88 at the impulse currents of 5-50 A. However, the varistor doped with 0.5 mol% exhibited excellent electrical stability, with variation rates for the breakdown field, for the nonlinear coefficient, and for the leakage current density of -6.9%, -12.6%, and -14.3%, respectively, after application of an impulse current of 2.1 kA. In contrast, the varistor doped with 2.0 mol% was destroyed after application of an impulse current of 1.2 kA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.907-910
• /
• 1992

This paper deals with the mesurement and the analysis by means of EMTP simulation for the fast-rising switching surges. The fast-rising surges having up to 180ns of front time and 3.42 p.u of peak value were measured at the 154KV substations. The fast-rising surges are expected to cause electric breakdown because the penetrating surges to the transformers result in the higher stress in the winding end than the average stress along the winding.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1549-1557
• /
• 2018

Optimizing the design of large-scale electric machines based on nonlinear finite element analysis (FEA) requires longer computation time than other applications of FEA, mainly due to the huge size of the machines. This paper addresses a new region decision method (RDM) with mesh adaptive direct search (MADS) for the optimal design of wind generators in order to reduce the computation time. The validity of the proposed algorithm is evaluated using Rastrigin and Goldstein-Price benchmark function. Moreover, the algorithm is employed for the optimal design of a 5.6MW interior permanent magnet synchronous generator to minimize the torque ripple. Additionally, mechanical stress analysis as well as electromagnetic field analysis have been implemented to prevent breakdown caused by large centrifugal forces of the modified design.