• Title/Summary/Keyword: Break-down

Search Result 504, Processing Time 0.024 seconds

Affect of $SiO_$ depending on the characteristics of break-down (절연파괴 특성에 미치는 나노첨가제($SiO_2$)의 영향)

  • Kim, Jeoung-Sik;Jeong, In-Bum;Lee, Hyuk-Jin;Choi, Kwang-Jin;Ryu, Boo-Hyung;Lee, Choong-Ho;Hong, Jin-Woong
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.06a
    • /
    • pp.376-377
    • /
    • 2009
  • In the study the affect of $SiO_$ depending on the characteristics of break-down, we have experimented the break-down for the $SiO_$ and variable temperature change after mading nano $SiO_$ of the diameter 12 [nm] at the epoxy resin. As the experimental results, we have continued that the break-down strength is increased at the adding change but the break-down strength is decreased again as the 0.4 [wt%] standard. Also, the break-down voltage is not changed at 25, 50 [$^{\circ}C$] as the temperate change. But break-down voltage is largely changed when temperate is rising up.

  • PDF

Study on the break-down voltage of laminated insulators (성층 절연물의 절연파괴전압에 관한 연구)

  • 이계호
    • 전기의세계
    • /
    • v.14 no.5
    • /
    • pp.15-19
    • /
    • 1965
  • Laminated insulators are largely used in the insulation of electric apparatus. This reason is based on the fact that the solid state insulators meet to electrical break-down by the weak spot theory. Thus the break-down voltage of the laminated insulators are generally affected by the density, distribution and the form of the weakspot contained in the each laminated thin insulator. In this experiment the effects of the characterics of weak spots are not studied, but the effects of the number of lamination and the pressure applied on the laminated insulator on its break-down voltage are investigated experimentaly, and got some interesting results which are reparted as follows.

  • PDF

A Study on the Break-down Characteristics of a Screw-type Centrifugal Pump due to Air Entrainment (공기흡입에 의한 스크류식 원심펌프의 양수불능 특성에 관한 연구)

  • Kim, You-Taek
    • The KSFM Journal of Fluid Machinery
    • /
    • v.6 no.3 s.20
    • /
    • pp.58-63
    • /
    • 2003
  • The performance of turbo pump drops rapidly and it gets into break-down when the void fraction reaches above the threshold value because the impeller flow passage is choked up with air bubbles. Phenomenological understanding of break-down and pumping recovery mechanisms under air-water two-phase flow conditions are therefore important for pump designers and essential assignment for researchers. In this paper, we investigated the characteristics of break-down and pumping recovery due to entrained air occurring inside a screw-type centrifugal pump which has a wide flow passage mainly through the findings of suction and discharge pressures, rotational speed, flow rate measurements and visualization.

A study on the break-down voltage of laminated insulators at commercial frequency (성층절연체의 적용주파수에 있어서의 파괴전압에 관한 연구)

  • Kye Ho Lee
    • 전기의세계
    • /
    • v.17 no.4
    • /
    • pp.13-17
    • /
    • 1968
  • Up to the present time, laminated insulators have been used for the insulation of electrical apparatus. The reason to use laminated insulators is based on the fact that electrical break-down voltage depends on the weak spot theory. If thin insulators are laminated, the weak spot existence probability across the electrodes decreases according to the number of lamination. In this test, the effect of the number of lamination and the thickness of each lamination sheets on their break-down voltage are discussed. The results taken as a whole indicate; (1) The break-down voltage of laminated insulators composed of thin sheets are higher than those of thick sheets, however, the voltage may become the same beyond any definite thickness of laminated insulators. (2) When the lamination sheets becomes thinner, the variation of break-down voltage is great according to the number of lamination sheets. (3) It may by effective to use laminated insulators even when the insulators are aparted from the electrodes.

  • PDF

Effect of Progesterone on the Germinal Vesicle Break'-down of Mouse Oocytes in Vitro (배양중에 있는 생쥐 여포난자(濾胞卵子)의 핵붕괴(核崩壞)(Germinal Vesicle Break-down)에 미치는 Progesterone의 영향에 관하여)

  • Cho, Wan-Kyoo;Kwon, Hyuk-Bang;Chung, Soon-O
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.1 no.1
    • /
    • pp.49-54
    • /
    • 1974
  • In the present studies, effect of progesterone on the germinal vesicle break-down of the mouse oocytes cultured in the micro tube was investigated. The results obtained are as follows: As dose of progesterone in the medium rose, accordingly the break-down of the germinal vesicle was suppressed. It was found that $ED_{50}$ was 15.7 ${\mu}g$/ml, and $ED_{90}$ 60.7 ${\mu}g$/ml of progesterone. The dose suppressing the oocyte maturation was apparently higher than that on the rabbit or on the mouse embryonal development. The inhibiting effect of progesterone on the GVBD was reversible. The germinal vesicle of the oocytes were broken down immediately in the medium upon removal of the hormone. Progesterone stops meiosis at any stage upon administration, while dbe AMP or theophylline supresses only the break-down of the nuclear membrane. Recovering of the meiotic division of the oocytes once exposed to progesterone was delayed a little. The inhibiting action of progesterone was not altered by adding more pyruvate or in the presence of higher concentration of the mineral ions in the culture medium.

  • PDF

Variation of Grain Quality of Rice Varieties Grown at Different Locations II. Relationship between Characteristics Related to Grain Quality (벼품종의 재배지역에 따른 미질특성변이 II. 미질관련형질 상호간의 관계)

  • Kwang-Ho Kim
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.35 no.2
    • /
    • pp.137-145
    • /
    • 1990
  • Six commercial rice varieties were cultivated at different locations in 1987 and 1988. Rice samples harvested from 8 to 20 locations for a variety each year were used to measure or observe grain appearance, amylose content and alkali digestibility, cooked rice texture using rheometer, gelatinization and viscosity of rice flour using amylograph, and eating Quality of cooked rice by sensory evaluation. Relationship between Quality characteristics showing large locational variation were analized to approach the long-term objective, rice grain Quality standardization. Percent white-center and white-belly grain of the same variety showed great variation between locations, but did not affect on 1000-grain weight, amylose content and alkali digestibility, amylogram and rheogram characteristics, and eating Quality of cooked rice. Positive correlationship were obtained between maximum viscosity and break down, and maximum viscosity and alkali digestibility. Set back was correlated negatively with maximum viscosity, break down and alkali digestibility. Rice samples having significantly lower values of maximum viscosity and break down and higher set back value at the same time showed higher ADV and lower texture palatability index (TPI) and viscousness/hardness ratio (Vi/H), and lower sensory evaluation score of cooked rice compared with those of rices having typically higher values of maximum viscosity and break down and lower set back value. When TPI, Vi/H and overall sensory eating score of cooked rices measured were divided into three categories, high, medium and low using deviation from locational mean value of a variety, many of rice samples having high TPI or high Vi/H showed medium or high in overall sensory eating score of cooked rice.

  • PDF

Fabrication of High Break-down Voltage MIM Capacitors for IPD Applications

  • Wang, Cong;Kim, Nam-Young
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.11a
    • /
    • pp.241-241
    • /
    • 2009
  • For the Radio Frequency Integrated Passive Device (RFIPD) application, we have successfully developed and characterized high break-down voltage metal-insulator-metal (MIM) capacitors with 2,000 ${\AA}$ plasma-enhanced chemical vapor deposition (PECVD) silicon nitride which deposited with $SiH_4/NH_3$ gas mixing rate, working pressure, and RF power of PECVD at $250^{\circ}C$ chamber temperature. At the PECVD process condition of gas mixing rate (0.957), working pressure (0.9 Torr), and RF power (60 W), the AFM RMS value of about 2,000 ${\AA}$ silicon nitride on the bottom metal was the lowest of 0.862 nm and break-down electric field was the highest of about 8.0 MV/cm with the capacitance density of 326.5 $pF/mm^2$.

  • PDF

Characteristics of the break down current of HTS tape with different insulator (고온초전도선의 절연체에 따른 단선전류 특성)

  • Kim Jae H.;Bae J. H.;Cho J. W.;KIM H. J.;Sim K. D.;Seong K. C.;Kim H. J.
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.1121-1123
    • /
    • 2004
  • Characteristics of the break down current of HTS tape with different insulator are described. The various insulators are utilized for enduring the high voltage in superconducting power devices. The break down current of HTS tape largely depends on insulators wound round HTS tape. In this research, The break down currents of Bi-2223 tape, which is widely used for superconducting power devices are tested and discussed. It is expected that results from this study can be utilized as basic data in designing superconducting power devices.

  • PDF

Statistical Analysis for Path Break-Up Time of Mobile Wireless Networks (이동 무선망의 경로 붕괴시간에 대한 통계적 분석)

  • Ahn, Hong-Young
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.15 no.5
    • /
    • pp.113-118
    • /
    • 2015
  • Mobile wireless networks have received a lot of attention as a future wireless network due to its rapid deployment without communication infrastructure. In these networks communication path between two arbitrary nodes break down because some links in the path are beyond transmission range($r_0$) due to the mobility of the nodes. The set of total path break down time(${\bigcup}T_i$), which is the union of path break down time of every node pair, can be a good measure of the connectivity of the dynamic mobile wireless network. In this paper we show that the distribution of the total path break down time can be approximated as a exponential probability density function and confirms it through experimental data. Statistical knowledge of break down time enables quantitative prediction of delay, packet loss between two nodes, thus provides confidence in the simulation results of mobile wireless networks.

Four-Wheel Tractor Utilization in Korea(II) -Repair and Maintenance- (농용(農用) 트랙터 이용(利用)에 관(關)한 조사연구(調査硏究)(II) -고장(故障) 및 수리실태분석(修理實態分析)-)

  • Park, Ho Seok;Lee, Yong Kook
    • Journal of Biosystems Engineering
    • /
    • v.6 no.2
    • /
    • pp.65-76
    • /
    • 1982
  • This survey was conducted to investigate the status of repair and maintenance of 4 wheel tractor for a basic reference to the improvement of quality and proper utilization of tractors. Thirty two counties from eight provinces, except Jeju, were covered in this study in order to investigate annual break-down and repair of tractor in 1980. The analyzed results are summarized as follows; 1. The average number of break-down of large size tractors(47ps) was 5.0 times in a year and it was about twice of that of small size tractors(19-23ps). The break-down frequency per 100 hours of use was 1.11 times in the large size and 0.65 times in the small size tractors. 2. 75.6 percent of total break-down was occured in main body of tractor and 24.4 percent in attachments. In particular, the break-down of plow and rotavator was more than 80 percent of total break-down of the small size tractor attachments. 3. The large size tractors which were occured more than one times of break-down a year was 75 percent and its rate of the small size tractor was 62 percent. But 9 percent of tractor surveyed had more than ten times of break-down in a year 4. The frequency of break-down had a peak in May, and it was directly proportional to the hours of use. 5. The causes of break-down were poor maintenance and operation by 29.8 precent, old parts by 30.2 percent, poor quality of parts by 20.6 percent, poor field condition by 16.3 percent and others by 3.1 percent. 6. Annual number of repair was 5.5 times and among them 55.6 percent was done by shop and 44.4 percent by operator. 7. Total required repair time was 30.6 hours a year in the large size tractor and 19.9 hours in the small size tractor. Average repair time was 3.62 hours a time. 8. Annual repair cost was 278 thousand won in the large size tractor and 70 thousand won in the small size tractor. The repair cost per hour of use was 621 won in the large size and 198 won in the small size tractor. 9. The repair cost rate of tractor(Y) was regulated with tractor age (X) as follow; Y=0.752X In case of the service life of tractor was 10 years, the total repair cost rate was 64 percent.

  • PDF