• Title/Summary/Keyword: Break-In

Search Result 3,247, Processing Time 0.034 seconds

QUANTITATIVE ASSESSMENT OF NASAL AND UPPER LIP CHANGES AFTER LE FORT I OSTEOTOMY SURGERY USING A 3-DIMENSIONAL COMPUTED TOMOGRAPHY (르포씨 1형 골절단술후 코와 상순의 연조직 변화의 삼차원 컴퓨터 단층촬영을 이용한 정량적 측정에 관한 연구)

  • Lee, Won-Deok;Yoo, Chung-Kyu;Choi, Jin-Young
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.32 no.1
    • /
    • pp.49-56
    • /
    • 2010
  • Objective: To evaluate nasal and upper lip changes after Le Fort I surgery by means of images taken with a three-dimensional computed tomography (3D-CT). Methods: Fifteen patients (9 female and 6 male, mean age 21.9 years) with preoperative and postoperative 3D-CT were studied. The patients underwent maxillary movement with impaction or elongation, and advancement or setback. With the 3D-CT which presents reconstructive soft tissue images, preoperative and postoperative measurement and analysis were performed for nasal tip projection angle, columellar angle, supratip break angle, nasolabial angle, interalar width, internostril width, columella length and nasal tip projection. Results: Postoperative interalar and internostril widening was significant for all categories of maxillary movement. However, there was little significant relation in all parameters between the amount and direction of maxillary movement. Interestingly, movement of the maxilla with upward did show a little decrease in the columellar angle, supra tip break angle and nasolabial angle. Also movement of the maxilla with forward did show a little advancement in the upper lip position. Conclusion: Changes to the nose clearly occur after orthognathic surgery. There was a significant increase in postoperative interalar width and internostril width with maxillary movement. However, no clear correlation could be determined between amount of change and maxillary movement. Interestingly, maxillary impaction did show a little decrease in the columellar angle, supra tip break angle and nasolabial angle. In addition, we used 3D-CT for more precise analysis as a useful tool.

Derivation of Dimensionless Routing Curves for Dam Failure Flood Wave (댐 붕괴 홍수파 해석을 위한 무차원 홍수추적곡선의 유도)

  • Lee, Jong Tae;Han, Kun Yeun
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.12 no.2
    • /
    • pp.87-99
    • /
    • 1992
  • The types of dam-break have been classified as instantaneous and gradual failure. Equations for estimating the peak outflow have been derived respectively as a metric unit. New dimensionless routing curves have been deveoloped based on the distance parameter which has been used in SMPDBK and hydro-geometric characteristics of dams and reservoirs in Korea. These suggested curves can be used for any case of the flow of supercritical or subcritical. The computed peak flowrate shows the trend of decreasing dependence on the Froude numbers as it increases. These curves are applied to Hyogi dam. and the results have good agreements with the data observed in the peak discharges, peak elevations and flood travel time. The simplified dam-break model in this study would contribute effectively to forecast the dam-break flood in this country with minimum informations in a short time.

  • PDF

REVIEW OF DYNAMIC LOADING J-R TEST METHOD FOR LEAK BEFORE BREAK OF NUCLEAR PIPING

  • Oh, Young-Jin;Hwang, Il-Soon
    • Nuclear Engineering and Technology
    • /
    • v.38 no.7
    • /
    • pp.639-656
    • /
    • 2006
  • In order to apply the leak before break (LBB) concept to nuclear piping systems, the dynamic strain aging effect of low carbon steel materials has to be taken into account, in compliance with the requirements of the Korean Standard Review Guide (KSRG) 3.6.3-1. For this goal, J-R tests are needed for a range of various temperatures and loading rates, including dynamic loading conditions. In the dynamic loading J-R test, the unloading compliance method can not be applied to measure the crack growth and direct current potential drop (DCPD) method; this method also has a problem defining the crack initiation point. The normalization method is known as a very useful method to determine the J-R curve under dynamic loading because it does not need additional equipment or complicated loading sequences such as electric current or unloading. This method was accepted by the American Society for Testing and Materials (ASTM) as a standard test method E1820 A15 in 2001. However, it has not yet been clearly verified yet if the normalization method is sufficiently reliable to be applied to LBB. In this study, the basic background of the J-integral, LBB and dynamic loading J-R test are explained, and the current status for dynamic loading J-R test methods are reviewed from the view point of LBB for nuclear piping. In particular, the theoretical and historical background of the normalization method which has received attention recently, is summarized. Recent studies for this method are introduced and future works are suggested that may improve the reliability of LBB for nuclear piping.

Effect of critical flow model in MARS-KS code on uncertainty quantification of large break Loss of coolant accident (LBLOCA)

  • Lee, Ilsuk;Oh, Deogyeon;Bang, Youngseog;Kim, Yongchan
    • Nuclear Engineering and Technology
    • /
    • v.52 no.4
    • /
    • pp.755-763
    • /
    • 2020
  • The critical flow phenomenon has been studied because of its significant effect for design basis accidents in nuclear power plants. Transition points from thermal non-equilibrium to equilibrium are different according to the geometric effect on the critical flow. This study evaluates the uncertainty parameters of the critical flow model for analysis of DBA (Design Basis Accident) with the MARS-KS (Multi-dimensional Analysis for Reactor Safety-KINS Standard) code used as an independent regulatory assessment. The uncertainty of the critical flow model is represented by three parameters including the thermal non-equilibrium factor, discharge coefficient, and length to diameter (L/D) ratio, and their ranges are determined using large-scale Marviken test data. The uncertainty range of the thermal non-equilibrium factor is updated by the MCDA (Model Calibration through Data Assimilation) method. The updated uncertainty range is confirmed using an LBLOCA (Large Break Loss of Coolant Accident) experiment in the LOFT (Loss of Fluid Test) facility. The uncertainty ranges are also used to calculate an LBLOCA of the APR (Advanced Power Reactor) 1400 NPP (Nuclear Power Plants), focusing on the effect of the PCT (Peak Cladding Temperature). The results reveal that break flow is strongly dependent on the degree of the thermal non-equilibrium state in a ruptured pipe with a small L/D ratio. Moreover, this study provides the method to handle the thermal non-equilibrium factor, discharge coefficient, and length to diameter (L/D) ratio in the system code.

PREDICTION OF SEVERE ACCIDENT OCCURRENCE TIME USING SUPPORT VECTOR MACHINES

  • KIM, SEUNG GEUN;NO, YOUNG GYU;SEONG, POONG HYUN
    • Nuclear Engineering and Technology
    • /
    • v.47 no.1
    • /
    • pp.74-84
    • /
    • 2015
  • If a transient occurs in a nuclear power plant (NPP), operators will try to protect the NPP by estimating the kind of abnormality and mitigating it based on recommended procedures. Similarly, operators take actions based on severe accident management guidelines when there is the possibility of a severe accident occurrence in an NPP. In any such situation, information about the occurrence time of severe accident-related events can be very important to operators to set up severe accident management strategies. Therefore, support systems that can quickly provide this kind of information will be very useful when operators try to manage severe accidents. In this research, the occurrence times of several events that could happen during a severe accident were predicted using support vector machines with short time variations of plant status variables inputs. For the preliminary step, the break location and size of a loss of coolant accident (LOCA) were identified. Training and testing data sets were obtained using the MAAP5 code. The results show that the proposed algorithm can correctly classify the break location of the LOCA and can estimate the break size of the LOCA very accurately. In addition, the occurrence times of severe accident major events were predicted under various severe accident paths, with reasonable error. With these results, it is expected that it will be possible to apply the proposed algorithm to real NPPs because the algorithm uses only the early phase data after the reactor SCRAM, which can be obtained accurately for accident simulations.

Changes in Flavonol Glycoside Contents of Orostachys Japonicus a. Berger according to Cultivation Conditions (재배 조건에 따른 바위솔의 Flavonol Glycoside 함량 변화)

  • Jang, Sang-Hun;Kang, Dong-Min;Kang, Jin-Ho;Park, Jong-Cheol;Lee, Sang-Gyeong;Shin, Sung-Chul
    • Korean Journal of Medicinal Crop Science
    • /
    • v.13 no.6
    • /
    • pp.250-254
    • /
    • 2005
  • The contents of flavonol glycosides, $kaempferol-3-O-{\beta}-D-glucoside$(1), $kaempferol-3-O-{\beta}-D-glactoside$ (2), $kaempferol-3-O-{\beta}-D-rhamnoside$ (3), $quercetin-3-O-{\beta}-D-glucoside$ (4) and $quercetin-3-O-{\alpha}-D-rhamnoside$ (5) in the houseleeks controlled by night-break, day-length control, and temperature during overwintering were determined to be compared with those in wild one. The contents of the flavonol glycosides 1-5 in the houseleeks were decreased roughly with warming during overwintering, and increased with longer light duration under the day-length control experiments. While warming functioned negatively on the production of the flavonol glycosides in the houseleek, longer light irradiation did positively during overwintering.

A Finite Volume Model Using ENO Scheme for 2D Unsteady flows (ENO 기법을 이용한 2차원 유한체적 수치모형)

  • Kang, Min-goo;Park, Seung-woo
    • Journal of Korea Water Resources Association
    • /
    • v.36 no.1
    • /
    • pp.1-11
    • /
    • 2003
  • This paper describes a finite volume, two-dimensional model. It adopts a recently developed essentially non-oscillatory(ENO) schemes based on the Lax-Friedrichs solver, which was modified for a finite volume grid, and employs a modified MUSCL(Monotonic Upstream centered Scheme for Conservation Law) for second-order accuracy in space. To demonstrate the applications of the model, it is applied to solve the 1-D and 2-D dam-break problems. The model in conjunction with the modified MUSCL showed a better agreement with analytical solutions than the minmod function in 1-D dam-break problems and is satisfactorily validated with documented published data in 2-D dam-break problems. The model was applied to tidal wane entering channel at one end, and the results showed a good agreement with analytical solutions. In the channel with reflective boundary conditions specified at the extremities, the model was capable of accurately simulating the wave propagation.

The Effect of Departmental Accounting Practices on Organizational Performance: Empirical Evidence from the Hospital Sector in India

  • MISHRA, Nidhish Kumar;ALI, Ijaz;SENAN, Nabil Ahmed Mareai;UDDIN, Moin;BAIG, Asif;KHATOON, Asma;IMAM, Ashraf;KHAN, Imran Ahmad
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.9 no.4
    • /
    • pp.273-285
    • /
    • 2022
  • Using data from a departmental profit and loss management questionnaire survey conducted for a group of hospitals consisting of various establishment entities, this study evaluates the effectiveness of departmental profit and loss management practices, such as break-even analysis, based on objective performance data. The study also examines whether the implementation of departmental profit and loss accounting is still effective in improving profitability in the financial year 2021 and whether the effectiveness of the implementation of departmental profit and loss accounting is robust. This study reconfirmed that the implementation of departmental profit-and-loss accounting has a positive effect on objective financial performance in hospitals and that the effect of improving profitability can be enhanced by implementing it monthly with high frequency and regularity and by using the accounting results more actively. It was also found that the department's implementation of break-even analysis had a positive impact on financial performance, which was enhanced by more active use of the data. Given the current economic climate, a hospital organization's active participation in income statement management, not only for the hospital as a whole but also for each department, would be an effective management activity.