• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.96-102
• /
• 2009

The effect of ultrasonic and alkaline pre-treatments on waste activated sludge (WAS) disintegration was investigated for improved anaerobic digestion. As WAS was treated by either methods, longer capillary suction time (CST) was required due to the break-up of cell walls, and its supernatant demonstrated increase in soluble chemical oxygen demand (SCOD), protein content and turbidity. Ultrasonic process combined with alkaline pre-treatment demonstrated higher SCOD and protein content in the supernatant as compared with ultrasonic pre-treatment only. However, the degree of disintegration (DDCOD) of WAS decreased with increasing solid concentration as both WAS disintegration methods employed simultaneously.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.768-776
• /
• 2010

This study was conducted to predict number and fresh weight of leaves, and total leaf area of a single-stemmed rose 'Vital' based on the accumulated thermal units, and to develop a model of shoot development for the prediction of the time when the flowering shoot reaches a phenological stage in a plant factory system. The base temperature ($T_b$), optimum temperature ($T_{opt}$), and maximum temperature ($T_{max}$) were estimated by regressing the rate of shoot development against the temperature gradient. The rate of shoot development ($R$, $d^{-1}$) for the phase from cutting to bud break (CT-BB) was best described by a linear model $R_b$ ($d^{-1}$) = -0.0089 + $0.0016{\cdot}temp$. The rate of shoot development for the phase from bud break to harvest (BB-HV) was fitted to the parabolic model $R_h$ ($d^{-1}$) = $-0.0001{\cdot}temp^2$ + $0.0054{\cdot}temp$ - 0.0484. The $T_b$, $T_{opt}$, and $T_{max}$ values were 5.56, 27.0, and $42.7^{\circ}C$, respectively. The $T_b$ value was used in the thermal unit computations for the shoot development. Number of leaves, leaf area (LA), and leaf fresh weight showed sigmoidal curves regardless of the cut time. The shoot development and leaf area model was described as a sigmoidal function using thermal units. Leaf area was described as LA = 578.7 $[1+(thermal units/956.1)^{-8.54}]^{-1}$. Estimated and observed shoot length and leaf fresh weight showed a reasonably good fit with 1.060 ($R^2=0.976^{***}$) and 1.043 ($R^2=0.955^{***}$), respectively. The average thermal units required from cutting to transplant and from transplant to harvest stages were $426{\pm}42^{\circ}C{\cdot}d$ and $783{\pm}24^{\circ}C{\cdot}d$, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.2
• /
• pp.1-7
• /
• 2008

Purpose: This study was performed to evaluate the changes of lens morphology and tear stability during wearing soft contact lenses (SCLs) which were kept in drying condition like dry eye or became to be dried due to heedless care. Method: SCLs having different water content, thickness or material were rehydrated after being dehydrated artificially 2 or 4 times, and estimated their diameter and radius. Furthermore, the changes of tear film break-up time (TBUT) during SCL wearing were also measured. Result: Due to the dryness, the diameter of both 70% water content SCL and 59% water content SCL decreased, but the decrement was larger in 59% water content SCL. The more 59% water content SCL was dehydrated, the more its radius changed. However, the radius of 70% water content SCL did not change by 2 times dehydration and increased greatly by 4 times dehydration. The reduction of diameter of -1.00 D SCL was greater than that of -9.00 D SCL. Moreover, the radius of -1.00 D SCL increased depending on the frequency of dehydration but that of -9.00 D SCL did not changed. The diameter and radius changes of lotrafilcon B, silicone hydrogel lens, were less than those of hilafilcon B, copolymer of HEMA and N-vinyl pyrrolidone. TBUT during wearing SCLs decreased by wearing dehydrated SCLs. Conclusion: The diameter and radius of dehydrated SCLs as well as TBUT during wearing them were changed in spite of rehydration, which would be the important cause of uncomfortable feeling when people wore dehydrated SCL. The changes of SCL morphology and TBUT differed according to the water content, lens thickness and material.

• Journal of the Korean Chemical Society
• /
• v.19 no.5
• /
• pp.317-324
• /
• 1975

The adsorptions of gaseous $H_2O\;and\;D_2O\;on\;Na^+-,\;Ca^{2+}-,\;and\;Al^{3+}$ montmorillonites at various temperatures were undertaken. Break down of ir hydroxyl stretching bands into four Gaussian components was made by means of manual technique. Resonance theory of water to form silanol hydroxyl group was supported by $3625cm^{-1}$ band for OH and $2680cm^{-1}$ band for OD which depend on amounts of water adsorbed. The broad bands at about $3400 cm^{-1}\;and\;2475cm^{-1}$ were assigned to stretching band of silanol OH hydrogen bonded to adsorbed water. The prominent $3230 cm^{-1}$ band together with component around $2345 cm^{-1}$ were attributed to adsorbed $H_2O\;and\;D_2O$ respectively. The chemical nature of the hydrogen bonding between adsorbed water and neighboring surface OH was explained adequately in terms of electrostatic interaction.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.564-567
• /
• 2001

This experiment investigated the dwarfing effect of daminozide and chlormequat to produce high quality of spray chrysanthemum. Long neck of cut-chrysanthemum break easily. Peduncle length of the cultivar 'Biarittz' and 'Vyking' were retarded by the foliar spray treatment of $1500mg{\cdot}L^{-1}$ daminozide. Daminozide application did not affect plant growth of 'Biarittz' and 'Vyking'. However, the number of days to flowering was delayed by 3 days by daminozide application of 'Biarittz'. Length of cut flowers of 'Vyking' was decreased by the application of daminozide, while chlormequat did not affect dwarfing of peduncle length in spray chrysanthemum.

• Journal of Navigation and Port Research
• /
• v.38 no.1
• /
• pp.39-44
• /
• 2014

Due to the oil price is increasing continuously, active researches on sources of renewable energy has been invigorated. Above all, ocean energy has high-usability because of ocean current has high density and large quantity compared to the wind energy. In this paper, efficiency enhancement of the wave power generation was described through horizontal plate installation at the break water wave power generation system that converts the ocean energy into electricity. The power-conversion efficiency can be improved by horizontal plate installation at existing system, but there has been insufficient studies domestically. The purpose of this paper is to analyze about the effects of the horizontal plate installation on the breakwater wave power generation system by wave basin experiment and to propose a position of horizontal plate installation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.112.2-112.2
• /
• 2010

슬러리 기포탑 반응기는 열 및 물질 전달의 용이성, 낮은 운전비용 및 장치의 간단성의 장점을 가지고 있어서 Fischer-Tropsch 반응, bio-reaction 등에 많이 응용되고 있다. 그러나 기포탑 반응기 내의 물질 거동은 매우 복잡하기 때문에 많은 연구가 이루어지고 있음에도 불구하고 그 현상에 대한 명확한 이해는 어려운 상황이다. 특히 기포탑반응기내에 기체의 포집율(gas hold-up)을 증가시키는 것을 목적으로 하는 연구들이 활발히 진행되고 있다. 본 연구에서는 기체의 분사 방향에 따른 기체 포집율의 변화를 관찰하였다. 기체 분사는 0.6 mm의 pore가 66개로 구성된 perforated plate를 통해서 이루어졌고, 수직방향, 수평방향, 45도 그리고 수직/수평 조합의 네 가지 분사방향에 대해서 실험을 수행하였다. 반응기는 내경이 0.15 m이고 높이 2.0 m 아크릴 반응기를 이용하였다. 사용된 연속상은 수돗물을 사용하였고 분산상 기체로는 압축 공기를 이용하였다. 전체적인 기체 포집율은 수직방향의 분사방향에서 가장 높게 측정되었다. 그리고 수직/수평의 조합 분사방향의 경우, 기체 포집율이 가장 낮게 관찰되었다. 이것은 분사방향이 수직/수평으로 서로 엇갈릴 경우, 기포간의 충돌 가능성이 높아지고 bubble coalescence가 증가하였기 때문인 것으로 보인다. 실제로 homogeneous flow regime에서 heterogeneous flow regime으로 전환되는 기체선속도는 분사방향이 수직, 45도, 수평, 수직/수평 조합의 순서로 감소하였다. 즉 이 순서로 기체흐름의 와류가 증가하는 것을 알 수 있었다. 또한 Dynamic Gas Disengagement(DGD) 분석을 통하여 큰 기포가 발생하기 시작하는 기체 선속도의 변화를 관찰하였다. 이 경우, 예상되듯이 수직/수평 조합에서는 1.5 cm/sec 기체 선속도에서 큰 기포가 발생하기 시작한 반면 수직 방향 분사의 경우에는 2.5 cm/sec의 보다 높은 기체 선속도에서 관찰되기 시작하였다. 이러한 현상들을 종합하였을 때, 기체 분사방향을 수직으로 일정하게 했을 때, 기포간 출동을 최소화하고 와류발생을 최대한 지연시키며 전체 기체 포집율을 증가시킬 수 있음을 알 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.133.1-133.1
• /
• 2010

슬러리 기포탑 반응기는 열 및 물질 전달의 용이성, 낮은 운전비용 및 장치의 간단성의 장점을 가지고 있어서 Fischer-Tropsch 반응, bio-reaction 등에 많이 응용되고 있다. 그러나 기포탑 반응기 내의 물질 거동은 매우 복잡하기 때문에 많은 연구가 이루어지고 있음에도 불구하고 그 현상에 대한 명확한 이해는 어려운 상황이다. 특히 기포탑반응기 내에 기체의 포집율(gas hold-up)을 증가시키는 것을 목적으로 하는 연구들이 활발히 진행되고 있다. 본 연구에서는 trayed bubble column 반응기에서 tray의 기공크기에 따른 기체 포집율의 변화를 관찰하였다. 실험에 사용된 반응기는 내경이 0.15 m이고 높이 2.0 m의 아크릴 반응기를 이용하였다. 사용된 연속상은 수돗물을 사용하였고 분산상 기체로는 압축공기를 이용하였다. Tray의 기공크기는 1.1 mm부터 14.0 mm까지 변화시키면서 높이별 기체 포집율의 변화를 관찰하였다. 기체 포집율의 변화를 균일흐름 영역과 불균일 흐름 영역에서 그 양상이 다르게 나타났다. 즉 균일계 영역에서는 기공의 크기가 1.1 mm부터 2.9 mm까지 증가시면 기체포집율이 감소하는 반면 2.9 mm 이상에서는 증가하는 것으로 관찰되었다. 반면 불균일 흐름 영역에서는 전반적으로 기공의 크기가 작아질수록 기체포집율이 증가하였다. 또한 각각의 흐흠 영역에서의 기체포집율 증가정도는 확연한 차이를 보이는 것을 알 수 있었다. 이것은 흐름영역의 유체거동에 따라서 기포와 tray 기공사이의 상호작용 메커니즘이 달라지기 때문인 것으로 보인다.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.6
• /
• pp.609-622
• /
• 2015

Objective: This study aims to investigate the correlation between office and work environment satisfaction levels and workers' musculoskeletal symptoms by conducting surveys asking office workers to state their musculoskeletal symptoms and office and work environment satisfaction levels. Background: The increased number of office workers and their indoor work hours using computers have led to new understandings of the importance of office environment including its temperature, humidity, noise levels, lighting and quality of air, and work environment including monitor arrangement, space arrangement and the functions of desks and chairs. Method: Specific details on office work, office environment satisfaction levels, work environment satisfaction levels, musculoskeletal symptoms, absence from work and treatment due to musculoskeletal related symptoms were analyzed based on the survey answers given by 397 office workers who were the subjects of this research. Results: Office workers showed different characteristics of musculoskeletal symptoms depending on their gender, age, work experience, office hours, break time and time spent on computers. Also, differences in symptoms were found for workers'with different satisfaction levels for office environment (temperature, humidity, noise levels, quality of air, lighting) and work environment (location of monitors, area and display of office space, chairs and desks). ANOVA shows the differences between groups of subjects classified by the experience of work-absences and treatments or pain complaints. Conclusion and Application: Relationship between workers' satisfaction levels with the office and work environment and their musculoskeletal symptoms is expected to be served as essential data for systematic management of the workplace.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.46-50
• /
• 2003

This paper is a study on the method that it is bruting a peace of a rough diamond with keeping the maximum volume of it. When a diamond will be bruting, how to keep the maximum diameter of one is very important because of its own characteristics that include shapes, mineral characteristics, and so on. In the middle of bruting. concentrating on the work is also required because girdle will be break down. We tried to bruting with gaining maximum diameters of rough diamond. As the result. an octahedron is made into the round shape with size $6.75\times 6.75\times 3.83$ mm , a dodecahedron the cushion shape with size $6.86\times 6.86\times 3.95$mm , a fancy the marquise with size $6.92\times 3.78\times 3.46$mm . Their rates of loss are round brilliant 24.5%, cushion barion 15.5 %, and marquise 18.7 %, respectively.