• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1061-1066
• /
• 2014

A stable second-order finite volume method was proposed to predict sediment transport under rapidly varied flow conditions such as transcritical flow. For the use under unsteady flow conditions, a sediment transport model was coupled with shallow water equations. HLLC approximate Riemann solver based on a monotone upstream-centered schemes for conservation laws (MUSCL) reconstruction was used for the computation of the flux terms. From the comparisons of dam break flow experiments on erodible beds in one- and two-dimensional channels, good agreements were obtained when proper parameters were provided. Lastly, dam surface erosion problem by overtopped water was simulated. Overall, the numerical solutions showed reasonable results, which demonstrated that the proposed numerical scheme could provide stable and physical results in the cases of subcritical and supercritical flow conditions.

• The Korean Journal of Physiology
• /
• v.11 no.2
• /
• pp.1-7
• /
• 1977

The activity of the $Ca^{++}$ activated adenosinetriphosphatase (Ca-ATPase) of actomyosin systeme of rabbit and frog skeletal muscle has been studied at varying pH and temperature. The PH optima of the Ca-ATPase activity of the rabbit actomyosin was rather broad. Over the temperature range of $16-36^{\circ}C$ activity of the enzyme was not appreciably changed between pH 6.4-8.5; below and above which it rapidly reduced. The pH at the inflection point of the enzyme activity increased as temperature decreased, showing the ${\bigtriangleup}pH\;inflection/{\bigtriangleup}T$ of approximately $-0.018\;unit/^{\circ}C$. Consequently, $(OH^-)/(H^+)$ ratio at the inflection point was constant regardless of assay temperature. In the frog actomyosin systems the Ca-ATPase activity was not apparently altered between PH 6.4-7.0 when the incubation temperature was $15{\sim}30^{\circ}C$. Outside of this range of pH, however, the enzyme activity was dramatically decreased. The pH of the inflection point changed inversely with temperature. ${\bigtriangleup}pH\;inflection/{\bigtriangleup}T$ at the acidic side was approximately $-0.018\;unit/^{\circ}C$, whereas that at the alkaline side it was about $-0.037\;unit/^{\circ}C$. The Arrhenius Plot on the Ca-ATPase activity at constant $(OH^-)/(H^+)$ ratio of 1.0 was not linear, but showed break at arround $20^{\circ}C$ for both rabbit and frog actomyosin Preparations. From these results it was speculated that pH dependence of Ca-ATPase activity of rabbit actomyosin systems might reflect titrations of histidine-imidazole and -SH groups, and that of the frog actomyosin represents titrations of histidine-imidazole and lysyllysine ${\alpha}-NH_2$ groups.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.1 s.13
• /
• pp.122-130
• /
• 2003

Nowadays, as construction projects become bigger, the probability of construction accidents is higher than any other day. When construction accidents break out, we may suffer from the loss of life and property. For preventing these damages, there is lawed that some public constructions have to insure Contractor's all risks insurance policy (CAR), However, CAR is used to preventing the insured from the loss of construction accidents, it is debated that the premium rate of CAR is not fair to the insured (contractors) The objects of this thesis are as follows Firstly, the fairness of the premium rate of CAR is reviewed, and then the amount of risk of the insured evaluates and applies to the premium rate. Secondly, the development direction of components for evaluating the amount of risk of the insured is presented in the research. Lastly, how to use the team which assesses the risk of the insured and construction works is proposed for deciding reasonably the premium rate of CAR

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1274-1280
• /
• 2012

Defatted grape seed meal protein (DGP) was extracted, and DGP films containing various plasticizers were prepared. To improve the mechanical properties of DGP film, nanoclay or gelatin was incorporated in the film-forming solution to manufacture DGP composite films. Among the plasticizers of fructose (FRU), sucrose (SUC), and polypropylene glycol (PPG), DGP film containing a SUC : PPG ratio of 2.5:0.5 exhibited the best film-forming ability. Addition of Cloisite $Na^+$ improved the mechanical properties of DGP film. Tensile strength (TS) and elongation at break (E) of the film containing 5% Cloisite $Na^+$ were 1.45 MPa and 71.97%, respectively. Regarding the DGP/gelatin composite films, TS and water vapor permeability (WVP) increased with increasing gelatin amount, whereas E decreased. In particular, the DGP/gelatin (2:2) composite film exhibited 20.95 MPa TS and 12.25% E. These results suggest that the DGP film prepared from defatted grape seed meal can be used as a food packaging material.

• The Journal of the Korea Contents Association
• /
• v.8 no.2
• /
• pp.173-181
• /
• 2008

Considering the existing corporate culture, it's hard to compatible with work for the women and family and it brings a loss of human resources to government and corporate. But if the corporate realized the social responsibility for the childcare as one of the family-friendly culture, and had an aggressive will, it will be possible to break the way of traditional childcare, raise the competitiveness by expanding the work childcare facilities and laid a foundation for the social contribution. Thus, this study expressed the division of labor by gender culture should be changed to family-based women-friendly culture in the home and the corporate. And also this paper provides that, in the view of the corporate has to fully realize the social responsibility, the government properly supports the corporate which has family-friendly culture and through it, with pursuit of profit the corporate can ensure the social justice from social contribution.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.102-105
• /
• 2002

ADSS(All Dielectirc Self-Supporting) cable installed under high voltage power cable line suffers a variety of environmental influence, rain, wind, snow fall, chemical pollution, salt fog and electrical stress. Its lifetime is required to be at least 20 years with this harsh weathering condition. The electrical stress under high voltage power line gives rise to dry band arcing and tracking, the severest damage, on the outer sheath of cable. Finally tracking might penetrate sheath and cause the break-down of ADSS cable. Tracking resistant sheath material, therefore, should be used to protect the core of ADSS from dry band arcing and to be sure long lifetime. In this work, we discuss various commercial tracking resistant material to investigate the way of track resistance and compare their mechanical, electrical, weathering and tracking properties through serial experiments. We found track resistant material is categorized into two main type : polyethylene with metal hydroxide and polyethylene with reduced carbon black. The Liquid contaminant, Inclined plane Tracking and Erosion test says the time to track of tracking resistant material with metal hydroxide has a little longer time to track in the high applied voltage than that with carbon black, but mechanical and weathering properties were inferior to.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.22 no.3
• /
• pp.5-24
• /
• 2011

Teachers must design instruction to meet effective teaching and learning before teaching implementation. The traditional models of instructional design such as Dick and Carey, ADDIE and ASSURE have been widely applied. However, the traditional models of instructional design have limitation in that students fail in deep understanding of subject content because of break down essential goal of the unit small pieces of contents. To solve this problem, Wiggins and McTighe have suggested backward design. Backward design is a method of designing instruction by setting evaluation before choosing activities or content to teach. Therefore, this study explores the effective teaching and learning by analyzing structure of backward design and appling backward design to 'Library and Information Life' subject for information literacy education. Backward design for 'Library and Information Life' subject applies the template which Wiggins and McTighe devised for instructional design.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.62-68
• /
• 2014

To improve the compatibility of bentonite with rubber matrix, organo-modified bentonite was synthesized with a silane coupling agent, [3-(2-aminoethylamino)propyl]trimethoxysilane (AEAPTMS) in the suspension of bentonite. The structure and characteristics of organo-modified bentonite were investigated using FTIR-spectroscopy, thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Ethylene-propylene-diene monomer (EPDM) rubber/organo-bentonite composites were compounded by a two-roll mill. The vulcanization and mechanical properties were studied. Results showed that the concentration of hydrochloric acid and $H_2O$ in the synthesis had significant influence on the modification of bentonite, which further contributed to the properties of the composites. Filled with 20 phr modified bentonite, the tensile strength and elongation at break of the rubber increased from 1.95 to 4.8 MPa and 300% to 500%, respectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.27-34
• /
• 2021

This study analyzes machining characteristics and presents optimal cutting conditions by measuring the surface roughness, dimensional accuracy, and dimension straightness based on the feed rate after processing the inner diameter hall of SCM415 steel using an automatic CNC(Computerized Numerical Control) lathe. The testing material was cut using an 11.8 mm-diameter Chamdrill after mounting the 32 mm-diameter round bar on an automatic CNC lathe. The cut depth was set at 3 mm, and the cutting speed was fixed at 1500 rpm. The surface roughness, dimensional accuracy, and dimension straightness of 15 testings were measured by changing the feed rate to 0.05, 0.1, and 0.15 mm/rev, respectively. It was difficult to process more than 15 tests during the maching due to noise or break. Additionally, the optimum cutting of SCM415 steel showed excellent surface roughness in the 10^th and 11^th of testing at cutting speed and feed speed of 1500 rpm and 0.05 mm/rev, respectively. The dimensional accuracy was measured in three dimensions after drilling, which showed good results with an average range of 0.0138-0.0208 mm. Moreover, the lower the feed speed, the higher the accuracy. Additionally, the measurement results of the dimensional straightness showed that the straightness is the straightness was the best at the 1^th and 2^th cutting regardless of the feed speed.

• Cross-Cultural Studies
• /
• v.33
• /
• pp.53-75
• /
• 2013

It is well-known that Chinese saw themselves as the centre of the world until the early 20th century. Since the Opium War 1840, however, belong to the 'general world' the past century. The Opium War made China break away from the Sinocentric spirit. This writing(essay) examines movies from China and the World concern the historical event 'the Opium War.' It also discusses desires that are inherent in narration of each movie and how accord with the real world. The movie The Opium War(1997) directed by XieJin is a work that intended: to wash off the memory of history of disgrace and; to successfully put a disparate piece, Hong Kong, of a puzzle named China together. The Japanese movie Wànshìliúfāng(1943)and The Opium War(1943) were also made for the victory of the Pacific War. They were part of project for uniting the domestic Japan and the colonial outlands - Manchuria and Joseon - that reenacted humiliating history of China, which had been the suzerain of the East Asia The Korean movie The Opium War(1964) was not recalled due to the demand for a lesson from China's painful history, but was recreated by imitating Hong Kong, into where capitalism was transplanted through the Opium War before Korea. History is eventually recalled to the present and the histories, that each different present invokes, are recreated in respective fashion. From their plan to wash off the history of disgrace and successfully return Hong Kong to its native country, China, Japan, and Korea portrayed China, once their cultural suzerain, as impotent East Asia. From their proposition that they should resist the present enemy, the West, together, they imitated the west of the East, which lead the way to achieve modernity. Finally, from their ambition to deviate from their status as developing country, they recalled and reorganized the history, the Opium War.