• The Korean Journal of Financial Management
• /
• v.21 no.2
• /
• pp.153-181
• /
• 2004

This study is to explore whether the relationship among financial markets changed according to financial development. For this study, data analysis was conducted through analytic methods incorporated structural breaks such as Zivot and Andrews'(1992) unit root test Gregory and Hansen's(1996a,b) cointegration test, etc. In study results, it was found that dynamic relationship between stock price and interest rate was changed from negative to positive after the structural break(Oct 1999). It may be resulted from the fact that asset substitutability between stock and bond was increased since stock investment became popularized The negative relationship between stock price and exchange rate was reinforced after the structural break(the foreign currency crisis). Also, the negative relationship between interest rate and exchange rate was strengthened after the structural break(Oct. 1999).

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.279-290
• /
• 2010

In this paper, a VOF method called RHRIC (refined high resolution intertace capturing) is introduced for solving the motion of the free surface and applied to the simulation of the advection of rigid interiaces of different shapes and a 20 dam-break problem, which are typical benchmark test cases. The numerical results for the interface advection cases are compared to the analytic solutions, while the available experimental data and other numerical results of various free surface methods for the dam-break problem are provided for the validation of the proposed VOF method. The same simulations were also carried out using the original HRIC scheme and a modified HRIC scheme called MHRIC for comparison. Although the RHRIC uses a simple order scheme, a basis of the original HRIC scheme, lower than the third-order ULTIMATE-QUICKEST used by the MHRIC, it provides an improved accuracy over the two previous HRIC methods.

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.87-93
• /
• 2015

In this study, a numerical analysis was performed to simulate the thermal-hydraulic response of the secondary side of a steam generator(SG) model equipped with an orifice-type SG outlet flow restrictor to a main steam line break(MSLB) at a pressurized water reactor(PWR) plant. The SG analysis model includes the SG upper steam space and the part of the main steam pipe between the SG outlet and the broken pipe end. By comparing the numerical calculation results for the present SG model to those obtained for a simple SG model having no flow restrictor, the effects of the flow restrictor on the thermal-hydraulic response of SG to the MSLB were investigated.

• Explosives and Blasting
• /
• v.36 no.1
• /
• pp.34-38
• /
• 2018

It proceed the trial test by applying blasting system with combination of electronic detonator and non-electric detonator(Supex Blasting Method) for the purpose of preventing the over-break as well as controling the blasting vibration and noisy at the site of Boseong-Imseongri railroad section ${\bigcirc}{\bigcirc}$. As a result of that, the blasting vibration and noisy was measured within the allowable standard of vibration. In conclusion, the combination of electronic detonator and non-electric detonator can not only reduce come construction cost, level of vibration and noisy but also get the prevention effect for Public resentment and minimize the rock-damage through over break control.

• Tribology and Lubricants
• /
• v.23 no.4
• /
• pp.156-161
• /
• 2007

The friction test using disk-on-pad type was carried out and regression analysis with friction parameters was applied fur wear loss presumption of motorcycle break disk. The wear loss has an effect on the frictional factor such as applied load, sliding speed, and number of ventilated disk hole. However, it is difficult to know the mutual relation of these factors on wear loss of motorcycle break disk. From this study, the result was shown that the regression analysis equation containing 4 elements were constructed and this equation had a trust of 95% in wear loss presumption of motorcycle break disk. It is possible to apply for another automobile parts.

• Health Policy and Management
• /
• v.13 no.4
• /
• pp.84-98
• /
• 2003

This research objective is to determine the optimal price break points for n­block tariff, because comparing non­linear pricing with uniform pricing on the basis of profit, n­block tariff outperforms two­part tariff, all unit discount price schedule, and uniform pricing. Although the merits of non­linear pricing are well documented, the attempt to practice the non-linear pricing in medical service sector has been relatively rare. The determination of the parameters under n­block tariff is the interesting decision making agenda for marketers. Under n­block tariff, the marketers should decide the optimal price break points and the optimal marginal price for each price zone. The results can be summarized as follows: The researchers found that mixture model can be the feasible methodology for determining the optimal number of n­block tariff and identifying the optimal segmentation criteria. We demonstrate the feasibility and the superiority of the mixture model by applying it to the database of medical examination. The results appear that the number of patients per month can be the optimal segmentation variable. And 6­block tariff is the optimal price break for this medical service.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.1029-1040
• /
• 2021

For the structural integrity evaluation of pressurized water reactor (PWR) steam generator (SG) tubes subjected to transient hydraulic loading, determination of the tube-to-tube gap velocity and static pressure distributions along the tubes is prerequisite. This paper addresses both computational fluid dynamics (CFD) and analytical approaches for predicting the tube-to-tube gap velocity and static pressure distributions during blowdown following a feedwater line break (FWLB) accident at a PWR SG. First of all, a comparative study on CFD calculations of the transient velocity and pressure distributions in the SG secondary sides for two different models having 30 or no tubes is performed. The result shows that the velocities of sub-cooled water flowing between any adjacent two tubes of a tubed SG model during blowdown can be roughly estimated by applying the specified SG secondary side porosity to those of the no-tubed SG model. Secondly, simplified analytical approximate solutions for the steady two-dimensional SG secondary flow velocity and pressure distributions under a given discharge flowrate are derived using a line sink model. The simplified analytical solutions are validated by comparing them to the CFD calculations.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.2
• /
• pp.35-46
• /
• 2020

In this paper, a fracture mechanics evaluation system which can be used to assess the leak-before-break (LBB) of nuclear piping is developed. Existing solutions for calculating the fracture mechanics parameters (J-integral and crack opening displacement) required for LBB evaluation were firstly presented. Then a module for calculating J-integral and COD was developed, with an additional module for predicting the critical load based on the crack driving force diagram to finally develop a fracture mechanics evaluation system. To confirm the validity of the proposed evaluation system, finite element (FE) analysis was performed, and the FE J-integral and COD results were compared with prediction results using the J-integral and COD estimations program. Furthermore, the critical load assessment module was verified by comparing the actual pipe test results (Battelle test data) with prediction results using the proposed program.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1077-1086
• /
• 2014

The flood wave generated due to dam break is affected by initial depth upstream since it is related with hydraulic characteristics propagating downstream, and flow resistance stress has influence on the celerity, travel distance, and approaching depth of shock wave in implementing numerical simulation. In this study, a shallow water flow model employing SU/PG scheme was developed and verified by analytic solutions; propagation characteristics of dam break according to flow resistance and initial depth were analyzed. When bottom frictional stress was applied, the flow depth was relatively higher while the travel distance of shock wave was shorter. In the case of Coulomb stress, the flow velocity behind the location of dam break became lower compared with other cases, and showed values between no stress and turbulent stress at the reach of shock wave. The value of Froude number obtained by no frictional stress at the discontinuous boundary was the closest to 1.0 regardless of initial depth. The adaption of Coulomb stress gave more appropriate results compared with turbulent stress at low initial depth. However, as the initial depth became increased, the dominance of flow resistance terms was weakened and the opposite result was observed.

• Clinical and Experimental Pediatrics
• /
• v.46 no.12
• /
• pp.1186-1193
• /
• 2003

Purpose : Fragile sites are points on chromosomes which tend to break non-randomly when exposed to specific chemical agents or conditions of tissue culture. The chromosomal break induced by the antineoplastic drug, 1-${\beta}$-D-arabinofuranosyl-cytosine(Ara-c), was investigated to study the laboratory conditions in which the incidence of chromosomal break could be enhanced. Besides, the fragile sites induced by Ara-C were investigated and compared to the already known locations of the specific chromosomal alterations observed in specific neoplasms. Methods : T-lymphocytes from theree normal males and three females were cultured for 48 hours. Cells from each individual were exposed to the Ara-C for an additional 24 hours. After the caffeine was added during the last six hours culture, the metaphase chromosomes were prepared following the conventional method. A site was considered fragile if it was found to break two or more per 100 chromosomal breaks in more than four of six individuals tested. Results : Ara-C induced 252.1 chromosomal breaks per 100 mitotic cells and this result was significantly higher than that of the control, which induced 25.2 breaks(P<0.05). The incidence of the chromosomal break by Ara-C was higher, if cultured in the MEM-FA, which has no folic acid, than in the RPMI 1640 which contains enough folic acid(P<0.05). The most common break site by Ara-C was 3p14.2(FRA3B). There were 20 fragile sites induced by Ara-C. Among these 20 fragile sites, seven coincided with the locations of the mapped oncogenes, JUN, SKI, REL, N-MYC, FHIT, MET, ETS-1, and FOS. Conclusion : S phase specific chemotherapeutic agent, Ara-C, induced the expression of the chromosomal fragile sites effectively using the T-lymphocyte in vitro. Some of the fragile sites by Ara-C highly coincided with the oncogenes and neoplasm specific chromosome breakpoints. In this regard, the fragile sites reported here could provide the unknown neoplasm related chromosomal alternation points.