본 연구에서는 음식물쓰레기의 자원화방안으로 메탄발효를 고려하여 메탄발효과정에서 음식물쓰레기와 생분해성 음식물쓰레기 전용봉투가 투입되었을 때 실제적으로 생분해성 플라스틱이 분해가 잘 이루어지며 생분해성 플라스틱이 미생물의 활성이나 분해반응에 영향이 있는지를 연구하였다. 30%생분해성 플라스틱의 경우, 미생물에 의한 무게감량에서 중온은 최대6%, 고온은 최대 10%밖에 분해가 되지 않았다. 신장율은 중옹이 약 150%, 고온이 약 120%까지 감소하였으며, 인장강도에서는 중온이 약 $180kgf/cm^2$, 고온이 $200kgf/cm^2$ 정도 감소하였다. 대체로 온도가 높고 미생물의 활성이 좋은 고온 혐기성 소화에서 중온보다 많은 무게감소를 보였으며 HDPE계열보다는 LLDPE계열의 플라스틱이 무게감량과는 상관없이 신장율과 인장강도에서 많은 감소를 보였다. 100%생분해성 플라스틱의 경우 미생물에 의한 무게감량에서 중온은 최대 8%, 고온은 최대 33%정도 감소가 있었다. 신장율은 중온이 약 230%, 고온이 약440%까지 감소하였으며, 인장강도에서는 중온이 약 $380kgf/cm^2$, 고온이 $400kgf/cm^2$ 정도 감소하였다. 이러한 결과 30%생분해성 플라스틱은 음식물쓰레기전용봉투로의 사용이 부적합하며 100% 생분해성 플라스틱의 경우 음식물쓰레기 전용봉투로 사용이 가능하나 제품이 고가이기 때문에 경제적 부담을 줄일 수 있는 방법이 요구된다.
Mapping of artificial levee lines, one of major tasks in river zone mapping, is critical to prevention of river flood, protection of environments and eco systems in river zones. Thus, mapping of artificial levee lines is essential for management and development of river zones. Coastal mapping including river zone mapping has been historically carried out using surveying technologies. Photogrammetry, one of the surveying technologies, is recently used technology for national river zone mapping in Korea. Airborne laser scanning has been used in most advanced countries for coastal mapping due to its ability to penetrate shallow water and its high vertical accuracy. Due to these advantages, use of LiDAR data in coastal mapping is efficient for monitoring and predicting significant topographic change in river zones. This paper introduces a method for construction of a 3D artificial levee line using a set of LiDAR points that uses normal vectors. Multiple steps are involved in this method. First, a 2.5-dimensional Delaunay triangle mesh is generated based on three nearest-neighbor points in the LiDAR data. Second, a median filtering is applied to minimize noise. Third, edge selection algorithms are applied to extract break edges from a Delaunay triangle mesh using two normal vectors. In this research, two methods for edge selection algorithms using hypothesis testing are used to extract break edges. Fourth, intersection edges which are extracted using both methods at the same range are selected as the intersection edge group. Fifth, among intersection edge group, some linear feature edges which are not suitable to compose a levee line are removed as much as possible considering vertical distance, slope and connectivity of an edge. Sixth, with all line segments which are suitable to constitute a levee line, one river levee line segment is connected to another river levee line segment with the end points of both river levee line segments located nearest horizontally and vertically to each other. After linkage of all the river levee line segments, the initial river levee line is generated. Since the initial river levee line consists of the LiDAR points, the pattern of the initial river levee line is being zigzag along the river levee. Thus, for the last step, a algorithm for smoothing the initial river levee line is applied to fit the initial river levee line into the reference line, and the final 3D river levee line is constructed. After the algorithm is completed, the proposed algorithm is applied to construct the 3D river levee line in Zng-San levee nearby Ham-Ahn Bo in Nak-Dong river. Statistical results show that the constructed river levee line generated using a proposed method has high accuracy in comparison to the ground truth. This paper shows that use of LiDAR data for construction of the 3D river levee line for river zone mapping is useful and efficient; and, as a result, it can be replaced with ground surveying method for construction of the 3D river levee line.
개 난자의 체외성숙율을 높이기 위하여 다양한 방법들이 시도되고 있지만 여전히 그 효율성은 낮다. 본 연구는 개 난자의 체외성숙 시, 성선 자극 호르몬인 황체형성호르몬(LH)과 난포자극호르몬(FSH), 상피세포성장인자(Epidermal growth factor, EGF) 그리고 시스테인(cysteine)을 각각 첨가하여 72시간 동안 체외성숙시킨 후 핵성숙율(GV: germinal vesicle, GVBD: germinal vesicle break down, MI: metaphase I, MII: metaphase II, UK: unknown stage)을 확인하였다. LH와 FSH를 첨가하였을 때 첨가하지 않은 군과 GV, MI 및 MII율에는 유의적인 차이는 없었다. 하지만 GVBD율은 첨가군이 유의적으로(p<0.05) 높았다. 성선 자극 호르몬을 첨가한 배지에 10ng/ml의 EGF를 첨가하였을 때 MII율이 첨가하지 않은 군보다 유의적으로(p<0.05) 높았다(4.54% vs. 7.06%). cysteine을 첨가하였을 경우, 핵성숙율에 유의적인 차이는 보이지 않았지만 전반적으로 핵성숙율이 향상된 것을 확인할 수 있었다. 따라서 개 난자의 체외성숙 시, $10 {\mu}g/ml$의 LH와 FSH, 10ng/ml의 EGF 그리고 0.57mM의 cysteine을 첨가하는 것이 핵성숙율을 향상시키는 것으로 사료된다.
The purpose of this research is to examine the expression methods of Haute Couture designers' high value-added jacket designs, In order to achieve this, the positions and sizes of the design component items of tailored jackets designed by Haute Couture designers from the 1940s to the 1970s were analyzed. The results of the analysis are as follows. First, the silhouette changed while leading the contemporaneous fashions, and such changes could be confirmed by the width and length of the jacket's shoulder, chest, waist, and hem that determine the silhouette. Particularly, the length of the chest changed which signifies that the depth of the armhole was playing an important role in the production of high value-added jackets in relation to the sleeves and the fit of jackets. Second, the position and the size of the dart are the components that can express the fit of a jacket and the designer's creativity, The starting point position of the dart and the position passing by waist, and the position of the end of the dart were placed in the position beyond B.P. depending on the designer's creativity and techniques, deriving the changes of the silhouette and creating high value-added jackets. Third, the tailored collar, which was a three-dimensional component made up of the upper collar, gorge line, lapel, and break line, was an important component that could express high value-added jackets. Changes in the width and the height of the break line position of the sides of the neck were represented as changes in the neck size of the collar, and changes in the vertex locations of the upper collar corner-point, the gorge line (the corner-point of the lapel and V zone) were also represented as diverse tailored collar designs. And the differences in the width and the length of each component of the collar were related to each other and represented as changes in the slope and angle of the collar outline. Fourth, the changes in sleeve designs of the jacket were in such items as the width of the sleeve opening, the width of the sleeve hem, and the length of the sleeve, and were represented as diverse sleeve designs such as widened sleeve opening types, and straight line types.
돼지풀(Ambrosia artemisiifolia var. elatior D/sub ESCOURTILS/)종자의 발아를 유발시키는 몇가지 환경요인의 영향을 조사한 결과는 다음과 같다. 종자의 휴면은 온도와 토양함수량이 적절하면 채종직후에도 일부분 타파되었고, 주야의 변온(30/20℃)이 휴면타파에 효과적이었다. 온도에 따른 발아율은 12℃∼32℃의 온도처리구에서 모두 발아가 이루어졌고, 발아에 필요한 최적온도는 24℃였다. (P<0.01). 토양함수량의 영향은 30% 처리구에서 증가하기 시작하여 60% 처리구에서 최대치를 나타내고 (P<0.05) 80% 처리구에서 다시 감소하는 경향을 나타내었으며, 토양함수량 7% 처리구에서는 전혀 발아가 이루어지지 않았다. 온도에 대한 광의 영향은 24℃의 온도 처리구에서 광처리시와 암처리시 가장 높은 발아율을 나타내었고, 광의 존재유무에 따른 발아율의 차이는 뚜렷하지 않았다. (P>0.05). 채종시기간에는 9개월 저장기간의 어떤 시기에도 종자의 발아에 특별한 영향을 나타내지 않았다. (P>0.05). 온도상승구(IT)에서 돼지풀종자는 16℃에서 발아하기 시작하였고 온도가 상승함에 따라 발아율이 점차 증가하여 최종발아율은 99.34%에 이르렀다. 반면에 온도하강구(DT)에서는 20℃에서 처음발아가 시작되었으며(1.34℃)에서 5.34%의 최종발아율을 나타내었고, 온도가 하강함에 따라 2차 휴면이 유도되었다. 저온에 의한 종자의 휴면타파가 고온에 의한 휴면타파보다 더 많이 유도되어, 돼지풀 종자는 늦가을에도 발아가 이루어지나 그 다음해 봄에 대부분의 종자발아가 이루어질 것으로 생각되어진다. 이와 같은 돼지풀종자들 내의 발아습성의 변이가 다양한 환경변화에 대해 자신의 생존과 자손의 번식을 위한 생리적·생태적 전략임을 알 수 있었다.
각 방사선량의 조사에 따른 사람 정상임파구, 마우스 정상임파구, 그리고 EL-4마우스 백혈병 세포의 DNA double strand breaks 발생율에 대하여 비교분석 하였던 바 다음과 같은 결과를 얻었다. LPS와 PHA를 첨가하여 각각 배양한 마우스 정상임파구의 DNA double strand breaks의발생율을 strand scission factor의 기울기로 비교평가해 본 바 LPS를 첨가배양한 군이 DNA DSB가 더 많이 형성되었다(P<0.005). 이것으로 볼 때 DNA double strand breaks발생에 있어서는 B cells이 T cells보다 더 민감하였다. 또한 EL-4 백혈병 세포는 정상 임파구보다 유의하게 DNA DSB가 더 많이 형성된 것이 관찰되었다(p<0.005). 한편 사람 정상임파구와 마우스 정상임파구 사이의 intrinsic radiosensitivity는 시험관내 실험에서 비교적 유사한 kinetics를 나타냈으나, 마우스 정상임파구가 사람 정상임파구보다 DNA DSB수율이 더 낮았다. 그래서 방사선을 조사하고 3.5시간이 지난후에 $10\%$ DNA DSB발생에 필요한 선량을 두 군간에 비교평가해 본 바 마우스 정상임파구의 선량이 더 높게 나타났다. 이상의 실험결과를 정확하게 설명하기는 어 렵지만 아마도 환경적인 요인과 유전적인 요인 때문인 것으로 사료되었다. 그리고 본 연구결과는 방사선조사에 따른 임상반응의 이해와 cytometric assessment의 방사선 생물학적 parameter로 이용될 수 있을 것으로 판단되었다.
탄성직물의 내구성은 탄성직물에 포함된 스판덱스사의 성질변화가 큰 영향을 미친다. 그러므로 본 연구에서는 세탁조건이 스판덱스사의 길이, 강도와 신도, $300\%$신장 후의 영구탄성 변화에 미치는 영향을 조사하였다. 시료로는 굵기가 다른 스판덱스사와 heat-set 시 신장률이 다른 편성물을 가정용 드림세탁기에서 세탁온도, 세탁 전 침지시간과 세탁휫수를 달리하여 세탁한 후, 편성물로부터 스판덱스사를 분리하여 기계적 성질을 측정하였다 스판덱스사의 길이는 세탁온도가 높아지거나, $40\%$에서 세탁휫수가 증가하면 계속 감소하였으나 세탁 전 침지시간에 따른 영향은 비교적 적었다 섬유가 가늘수록 길이 수축률이 크며 세척 조건변화에 따른 수축률이 크게 증가하였다. 스판덱스사의 강도와 신도는 반복 세척 시의 감소가 뚜렷하였으며, heat-set 시에는 강도와 신도도 크게 감소하였고, heat-set 시에 가해준 신장률이 클수록 감소가 더 컸다. 한편 스판덱스사의 영구변형률은 세탁온도가 높으며, 침지시간이 길고, 세탁횟수가 많을 때 현저히 높았다. 대체적으로 굵은 스판덱스사의 영구변형률이 크며, 140D는 30회 세척 후에 $28.0\%$의 영구변형 이 일어났다. Heat-set로 스판덱스사의 영구변형은 늘어나며, heat-set 시에 신장률이 큰 스판덱스사의 영구변형이 더 많았다. DSC 열분석 곡선에서 스판덱스 섬유는 반복 세탁과 heat-set여부와 관계없이 동일한 융해온도를 나타내었으며, 이로부터 스판덱스 섬유의 hard segment분자쇄 길이는 세탁 또는 heat-set후에도 변화가 없는 것으로 보여진다.
PKC는 그들의 cofactor-requirments에 따라 cPKC, nPKC 그리고 aPKC, 3그룹으로 나어진다. 마우스 난 성숙과정에 있어서 cPKC 및 nPKC의 activators인 PMA의 영향에 대한 많은 결과가 보고되었다. 그러나 각각의 그룹에 대한 차별화된 영향에 대하여는 밝혀져 있지 않다. Mezerein의 analog인 thymeleatoxin은 cPKC의 특이적인 activator로 보고되어져 있다. 본 연구에서는 specific cPKC activator인 thymeleatoxin의 마우스 난 성숙과정에의 영향을 제1감수분열 재개 능(germinal vesicle break down, GVBD)과 제1 극체 형성 능(1st polar body extrusion)을 조사하여 cPKC및 nPKC activator인 PMA와 비교 검토하였다. 그 결과 GVBD IC50는 thymeleatoxin에서 ~400nM, PMA에서는 ~50nM이었으며, 제1극체 방출의 IC50는 thymeleatoxin에서 ~200nM, PMA에서는 ~20nM이었다. 이들 결과는 Thymeleatoxin의 GVBD나 1st polar body extrusion 저해효과가 PMA에 비하여 1/8~1/10인 것으로 나타났다. 이들 결과는 GVBD나 제1극체 형성을 포함하는 난 성숙과정에서 cPKC보다 상대적으로 nPKC의 관여가 깊음을 보여 준다.
Semiconductor chip is bonded to the substrate by melting solder bumps. In general, the chip bonding is applied by a Reflow process or a Thermo-Compression(TC) bonding process. In this paper, we introduce a Laser Assisted Thermo-Compression bonding (LATCB) process to improve the anxiety of the existing process(Reflow, TC bonding). In the LATCB process, the chip is bonded to the substrate by irradiating a laser with a uniform energy density in the same area as the chip to melt only the solder bumps and press the chip with a Transparent Compression Module (TCM). The TCM consists of a fused silica header for penetrating the laser and pressurizing the chip, and a piezoelectric actuator (P.A.) coupled to both ends of the header for micro displacement control of the header. In addition, TCM is a structure that can pressurize the chip and deliver it to the chip and solder bumps without losing the energy of the laser. Fused silica, which is brittle, is vulnerable to deformation, so the header may be damaged when an external force is applied for pressurization or a displacement differenced is caused by piezoelectric actuators at both ends. On the other hand, in order to avoid interference between the header and the adjacent chip when pressing the chip using the TCM, the header has a notch at the bottom, and breakage due to stress concentration of the notch is expected. In this study, the thickness and notch length that the header does not break when the external force (500 N) is applied to both ends of the header are optimized using structural analysis and Coulomb-Mohr failure theory. In addition, the maximum displacement difference of the P.A.s at both ends where no break occurred in the header was derived. As a result, the thickness of the header is 11 mm, and the maximum displacement difference between both ends is 8 um.
목적: 본 연구에서는 반복적인 건조에 의해 유발되는 실리콘 하이드로겔 렌즈의 형태 변화 및 착용시의 자 타각적 증상의 변화에 대해 알아보고자 하였다. 방법: 재질 혹은 두께가 다른 실리콘 하이드로겔 렌즈를 4회씩 건조하고 수화시킨 후 전체 직경과 베이스커브의 변화를 비교하였으며, 건조되었던 실리콘 하이드로겔 렌즈를 착용한 후 착용자의 자각적 증상 및 비침입성 눈물막 파괴시간과 순목횟수를 측정하였다. 결과: 반복되는 건조와 수화로 인하여 모든 실리콘 하이드로겔 렌즈의 전체 직경과 베이스커브가 증가하였다. 전체 직경과 베이스커브가 변하는 정도는 재질에 따라 각기 상이하였으며 두꺼운 렌즈에서는 건조수화 횟수에 따라 불규칙적인 변화가 나타났다. 실리콘 하이드로겔 렌즈의 재질이나 두께에 관계없이 건조수화 과정을 거친 렌즈를 착용하였을 때에는 착용자의 비침입성 눈물막 파괴시간은 감소하였으며, 순목횟수는 증가하였다. 또한, 반복적인 건조수화는 렌즈의 착용감에도 영향을 미쳐 가려움, 통증, 자극감, 이물감, 건조감이 증가하는 경향이 있었다. 결론: 본 연구 결과를 통하여 반복적인 건조수화로 실리콘 하이드로겔 렌즈의 형태 변화 및 이에 따른 착용감 저하 유발을 확인하였으므로 건조한 환경에 대하여 강한 내구성을 가지는 실리콘 하이드로겔 콘택트렌즈의 개발 필요성을 제안할 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.