• 제목/요약/키워드: Break area

검색결과 316건 처리시간 0.027초

재해저류지 위치결정과 용량결정 과정에 관한 연구 (Study of a Process for Flood Detention Location and Storage Capacity)

  • 오건흥;박기범;장인수
    • 한국환경과학회지
    • /
    • 제17권6호
    • /
    • pp.601-609
    • /
    • 2008
  • In this study for the development of area due to the increasing of industry, population and spreading of urbanization is rapidly increasing but about seventy percent of our nation's areas consists of the mountainous districts. In such case, when those areas have the heavy rains break, they are washed away by a fast-flowing stream of a valley and overflowed. Thus it could result on human life and property damage and also the widespread of flood damage in the downstream area. To decrease those damage, the construction of flood control reservoir is necessary. This research was aim to construct the flood runoff models of a mountainous small district and to determine the probability rainfall by analyzing precipitation. The study also examined the effects of location and size of flood control reservoir on flood reduction. The result showed that the construction of detention basin was an effective way to ensure the safety of flood control and multiple detention basin had superior result for reducing amount of runoff in the down stream area than the single detention basin.

시·도 교육청별 중·고등학교의 시설기준과 충북지역 현상설계 학교의 스페이스프로그램 비교 연구 (A Comparative Research on the Facility Criteria of Cities·Provinces Education Office and Space Program of Competition School in Chung-buk Province)

  • 장동훈;정진주
    • 교육시설 논문지
    • /
    • 제22권3호
    • /
    • pp.3-11
    • /
    • 2015
  • Under the establishment and operating regulations of school presented only minimum standard for the founding of the school. Therefore, It is intended to suggest the reasonable space standard of the school facility, through comparison & analysis of facility standard in each city and provincial education office. Especially, The facilities standard of Chungcheongbuk-do Office Of Education has been exceeded standardization of architectural space which is proposed the Ministry of Education, and they has made the various learning space reflected creative ideas by designing all of the new school competition since 2000. In order to deal with reacting the changing method of studying like as the examples of Middle & High school in Chungcheongbuk-do, they need to set aside the enough required area for a head of students and the common space which is more than 40% in the total area according to the various learning space, securing the supporting facilities, and break & movement of the students. Moreover, Each of the city and provincial education offices are needed to establish the standardization of proper area for space organization of the planned school throughout upcoming competition.

느타리버섯 재배용 배지 입상 장치 개발(2) - 시작기 성능시험 및 경제성 평가 - (Development of Loading Machine of Culture Medium for Oyster Mushroom Production - Performance Test and Economic Analysis of Loading System -)

  • 이경진;임학규;김태한
    • Journal of Biosystems Engineering
    • /
    • 제34권4호
    • /
    • pp.220-227
    • /
    • 2009
  • In the process of oyster mushroom production, loading work of culture medium needs the most intensive labor power. Therefore, development of culture medium machine causes to reduce the manpower and cost. The main objective of this study is to develop the culture medium loading machine and investigate the optimal operation conditions and to evaluate the economic value of the machine. The results are summarized as follows: 1. Optimum transporting velocity of the conveyor was 0.61 m/s 2. Optimum speed of blower was 3183 rpm at the transporting velocity of 0.61 m/s with the loading quantity of 3.41 t/hr 3. Recommendable opening area ratio of pressure controller was 1/2 at the blower speed of 3183 rpm and the transporting velocity of 0.61 m/s 4. The break even point resulted in $240\;m^2$ of cultivating area compared to the method of with portable workbench, and $350\;m^2$ of cultivating area compared to the method of with a tractor and a truck.

다중흐름방향법과 평수가정법을 이용한 분포형 침수추적모형(SIMOD)의 적용성 평가 (Evaluation of the Application on Distributed Inundation Routing Model (SIMOD) Using MDM and FWA Method)

  • 김진혁;이석호;김병식
    • 대한토목학회논문집
    • /
    • 제38권2호
    • /
    • pp.261-268
    • /
    • 2018
  • 본 연구에서는 홍수총량을 시간에 따라 분포시키는 단순홍수범람해석 모형인 SIMOD(Simplified Inundation MODel)를 이용하여 도심지 침수분석을 실시하고자 하였다. 기존의 침수분석 모형들은 입력자료 구축이 어렵고, 분석시간이 오래 걸리는 등의 단점을 가지고 있다. SIMOD는 다중흐름방향법(Multi Direction Method, MDM)과 평수가정법(Flat-Water Assumption, FWA)의 두 흐름 방정식으로 홍수흐름을 단순화시킨 모형으로, 대상지역의 지형자료와 유입 홍수량 등 간단한 수문자료만을 이용하여 홍수범람에 의한 침수경로 분석이 가능하여 신속한 모델링으로 빠른 의사결정을 할 수 있다는 장점이 있다. 따라서 SIMOD 모형을 이용하여 도심지 침수분석을 실행한 뒤, 기존의 침수분석 모형인 FLO-2D 모형분석결과와 비교를 시행하여 모형의 적용성을 분석하였다. 대상지역은 도심지 지역의 제방 월류-파제 시나리오를 적용하기 위해 하천이 인접해 있고, 충분한 높이의 제방이 있는 금호강 하류에 위치한 성서제를 대상지역으로 선정하였으며, 지형자료는 기존의 침수분석에 사용하는 DEM지형자료와 도심지 건물군, 도로 분포 등을 표출할 수 있는 DSM지형자료를 이용하였다. 입력 홍수량은 200년 빈도계획홍수위를 기준으로 제방파제시나리오를 적용 사각웨어식을 적용하여 산정하였으며, 1~24시간의 모의시간과 침수면적을 비교 분석하였다. SIMOD의 경우 24시간 모의시간이 7분 안으로 나타났으며 면적차이는 FLO-2D와 비교했을 때 20% 내외로 나타났다. 또한 DSM을 이용하여 분석한 결과 도로나 건물의 영향이 반영되어 앞으로 도심지에서 DSM을 이용한 지형자료의 필요성을 확인하였다.

간선도로 교차로의 TOD 시간계획 최적화 및 현장적용 평가 (Optimization of TIME-OF-DAY and Estimation on the Field Application for Arterial Road)

  • 이인규;이호상;김영찬
    • 대한교통학회지
    • /
    • 제29권4호
    • /
    • pp.113-123
    • /
    • 2011
  • 최근에 활발히 진행된 ITS사업과 신호개선사업으로 인해 신호제어 시스템의 온라인화와 실시간 신호제어시스템이 도입되어 교통신호제어기의 첨단화가 진행되었다. 하지만 실시간 신호제어 운영변수 산정의 기초가 되고, 현재 가장 일반적으로 이용되는 신호교차로의 제어방법으로 사용되는 TOD제어의 운영을 위한 효과적인 신호시간계획을 위한 방법론이 부재되어 왔다. TOD 시간계획의 최적화를 수행하는 과정은 신호교차로의 효율성 제고를 위해 매우 중요한 작업이며, 최적화 수행과정의 정립이 필요한 실정이다. 본 연구에서는 TOD 시간계획 작성 시 가장 선행되어야 할 Sub Area 결정 방법과 첨두시와 비첨두시의 시간 경계를 결정하는 방법론에 대해서 정의하고, 각 방법론에 의해 결정된 시간경계 구간의 신호제어 변수를 신호최적화 모형을 통해 산출하였다. 최적화된 신호제어 변수의 효과를 분석하기 위해 서울시의 동2로 간선도로 구간에 새로운 TOD 시간계획을 적용하고 필드테스트를 수행하였으며, 이러한 TOD 시간계획의 적용 효과를 사전/사후 분석을 통해 검증하였다.

IoT Enabled Smart Emergency LED Exit Sign controller Design using Arduino

  • Jung, Joonseok;Kwon, Jongman;Mfitumukiza, Joseph;Jung, Soonho;Lee, Minwoo;Cha, Jaesang
    • International journal of advanced smart convergence
    • /
    • 제6권1호
    • /
    • pp.76-81
    • /
    • 2017
  • This paper presents a low cost and flexible IoT enabled smart LED controller using Arduino that is used for emergency exit signs. The Internet of Things (IoT) is become a global network that put together physical objects using network communications for the purpose of inter-communication of devices, access information on internet, interaction with users as well as permanent connected environment. A crucial point in this paper, is underlined on the potential key points of applying the Arduino platform as low cost, easy to use microcontroller with combination of various sensors applied in IoT technology to facilitate and establishment of intelligent products. To demonstrate the feasibility and effectiveness of the system, devices such as LED strip, combination of various sensors, Arduino, power plug and ZigBee module have been integrated to setup smart emergency exit sign system. The general concept of the proposed system design discussed in this paper is all about the combination of various sensor such as smoke detector sensor, humidity, temperature sensor, glass break sensors as well as camera sensor that are connected to the main controller (Arduino) for the purpose of communicating with LED exit signs displayer and dedicated PC monitors from integrated system monitoring (controller room) through gateway devices using Zig bee module. A critical appraisal of the approach in the area concludes the paper.

경복궁 석조조형물의 재질 및 손상특성 분석 (Material and Deterioration Characteristic Analysis for Stone Sculptures in Gyeongbokgung Royal Palace, Seoul)

  • 김지영;조영훈;이찬희
    • 보존과학회지
    • /
    • 제29권4호
    • /
    • pp.407-420
    • /
    • 2013
  • 경복궁 석조조형물은 주로 화강암(884점, 96.7%)과 대리암(25점, 2.7%)으로 구성되었으며, 다양한 산지의 석재가 혼용되어 조성되었다. 이 석조조형물에서 나타나는 주요 손상은 균열(24%), 탈락(21%), 박리박락(36%), 입상분해(9%) 및 흑색변색(20%)으로써, 균열과 탈락은 높은 물리적 손상도에, 흑색변색은 높은 변색 손상도에 주로 기여하는 손상유형이다. 구역별로는 경회루(3등급 55%), 근정전(3등급 29%) 및 품계석(3등급 11%) 구역의 석조조형물에서 상대적으로 손상도가 높아 이들을 우선관리대상으로 설정하여 집중적으로 관리하고 정기모니터링 하는 것이 필요하다. 특히 품계석은 대리암으로 구성되어 외부환경에 노출될 시 풍화민감도가 크므로 강우와 일사를 제어할 수 있는 보호시설이 요구된다.

천리안 위성 자료를 이용한 대류권계면 접힘 난류 탐지 가능성 연구 (Feasibility Study for Detecting the Tropopause Folding Turbulence Using COMS Geostationary Satellite)

  • 김미정;김재환
    • 대기
    • /
    • 제27권2호
    • /
    • pp.119-131
    • /
    • 2017
  • We present and discuss the Tropopause Folding Turbulence Detection (TFTD) algorithm for the Korean Communication, Ocean, Meteorological Satellite (COMS) which is originally developed for the Tropopause Folding Turbulence Product (TFTP) from the Geostationary Operational Environmental Satellite (GOES)-R. The TFTD algorithm assumes that the tropopause folding is linked to the Clear Air Turbulence (CAT), and thereby the tropopause folding areas are detected from the rapid spatial gradients of the upper tropospheric specific humidity. The Layer Averaged Specific Humidity (LASH) is used to represent the upper tropospheric specific humidity calculated using COMS $6.7{\mu}m$ water vapor channel and ERA-interim reanalysis temperature at 300, 400, and 500 hPa. The comparison of LASH with the numerical model specific humidity shows a strong negative correlation of 80% or more. We apply the single threshold, which is determined from sensitivity analysis, for cloud-clearing to overcome strong gradient of LASH at the edge of clouds. The tropopause break lines are detected from the location of strong LASH-gradient using the Canny edge detection based on the image processing technique. The tropopause folding area is defined by expanding the break lines by 2-degree positive gradient direction. The validations of COMS TFTD is performed with Pilot Reports (PIREPs) filtered out Convective Induced Turbulence (CIT) from Dec 2013 to Nov 2014 over the South Korea. The score test shows 0.49 PODy (Probability of Detection 'Yes') and 0.64 PODn (Probability of Detection 'No'). Low POD results from various kinds of CAT reported from PIREPs and the characteristics of high sensitivity in edge detection algorithm.

양식 넙치가격 변동성의 구조변화와 비대칭성 검증 (Tests for the Structure Change and Asymmetry of Price Volatility in Farming Olive Flounder)

  • 강석규
    • 수산경영론집
    • /
    • 제45권2호
    • /
    • pp.29-38
    • /
    • 2014
  • This study is to analyse the timing of the structural change of price volatility and the asymmetry of price volatility during the period before and after the timing of the structural change of price volatility using Jeju Farming Olive Flounder's production area market price data from January 1, 2007 to June 30, 2013. The analysis methods of Quandt-Andrews break point test and Threshold GARCH model are employed. The empirical results of this study are summarized as follows: First, the result of Quandt-Andrews break point test shows that a single structural change in price volatility occurred on May 4, 2010 over the sample period. Second, during the period before structural change, daily price change rate has averagely positive value which means price increase, but during the period after structural change daily price change rate has averagely negative value which means price decrease. Also, daily volatility of price change rate during the period before structural change is higher than during the period after structural change. This indicates that price volatility decreases after structural change. Third, the estimation results of Threshold GARCH Model show that the volatility response against price increase is larger during the period after structural change than during the period before structural change. Also the result shows the volatility response against price decrease is larger during the period after structural change than during the period before structural change. And, irrespective of the timing of structural change, price increase has an larger effect on volatility than price decrease. This means volatility is asymmetric at price increase.

IPSec 환경에서 연속적인 이동성 제공을 위한 MBB 시스템 설계 (Design of MBB System for provide Mobility continuity in Environment IPSec)

  • 김선영;조인준
    • 한국정보통신학회논문지
    • /
    • 제12권3호
    • /
    • pp.478-484
    • /
    • 2008
  • 이동 노드가 이동했을 경우 MIPv6에서는 새로운 연결을 위한 인증과정이 진행된다. 잦은 바인딩 갱신작업과 인증과정은 많은 트래픽을 초래하므로 서비스를 지연시킨다. 이러한 문제를 해결하기 위해 PMIPv6에서는 이동 노드의 부담을 덜고자 네트웍 기반의 이동성 프로토콜을 지원한다. 그러나 도메인간 혹은 도메인내에서 옮겨질 경우 새로운 주소를 생성해야 함으로 MIPv6의 문제점을 그대로 내포하게 된다. IPSec에서도 외부망으로 이동시 신규협상이 이루어져야 한다. 이는 이동노드에 부담을 발생시킨다. 본 논문에서는 주소 변화 및 보안 재협상으로 인한 끊김 현상과 지연을 해결하기 위해 MBB(Make Before Break) 시스템을 제안한다. 이동 노드가 CoA주소를 받을 경우 IPsec 협약이 진행된다. 기존 협약내용에 사용된 식별자를 제안한 BID 메시지를 통해 CN(Correspondent Node)에게 전송하여 신원을 확인시킨다. 그 후 협약을 간소화하여 협상하므로 연결 끊김을 방지할 수 있고, IPSec 협약단계에서 이동 노드의 부담을 덜고, 두개의 주소로 동시에 통신함으로 패킷 손실의 확률을 줄일 수 있다.