• 한국약용작물학회지
• /
• 제12권1호
• /
• pp.17-23
• /
• 2004

본 연구는 다수성 홍화 육종에 필요한 유전자원의 특성을 평가하여 교배모본으로 활용코자 원산지를 포함한 홍화 재배중심지에서 수집한 39개 계통을 대상으로 주요 농업형질의 재배적 특성을 비교하고 각 형질간의 상관 및 경로계수 등을 분석하였는 바 그 결과는 다음과 같다. 수집한 유전자원의 개화소요일수는 $83{\sim}100$일로 국내종 보다 만생인 계통이 많았다. 경장은 $75{\sim}165$\;cm$의 범위를 보여국내종 보다 국외 수집종이 대부분 장경이었고, 줄기 직경은 국외 수집종들이 국내종 보다 대부분 굵었다. 엽의 수와 면적은 국내종이 국외 수집종에 비해 많았고 큰 편이었다. 총분지수는 국외 수집종이 국내종보다 많았으며, 특히 3차 분지수의 범위는 $0{\sim}25$개로 큰 변이를 보였고 국내종의 경우는 3차 분지가 없었다. 화두수는 다분지 계통인 국외 수집종에서 많았다. 수량은 생육이 우수한 특성을 가진 중앙아시아와 미국에서 수집된 계통이 가장 높은 것으로 나타났다. 개화소요일수, 줄기직경, 분지수 및 화두수가 수량과 정의 상관관계를 보였다. 화두수와 총분지수의 직접효과가 높았으며 줄기직경, 엽수 및 2차분지수는 간접효과가 각각 컸다.

• 한국정보과학회논문지:시스템및이론
• /
• 제32권6호
• /
• pp.306-313
• /
• 2005

조건 분기예측은 프로세서 성능 개선을 위한 중요한 기술이다 그러나, 분기예측실패는 많은 사이클을 낭비시키며, 비순서적 실행을 방해하고, 잘못 예측된 명령어들을 수행하게 되므로 전력을 낭비한다. 따라서 높은 정확도를 갖는 분기 예측기는 좋은 성능을 갖는 프로세서를 위해 중요하다. gshare와 GAg같은 전역 히스토리를 기반으로 하는 예측기에서는 히스토리의 명령어 완료시간 갱신 (commit update)에 의해 많은 분기예측실패가 발생한다. 그런 문제를 해결하기 위해 히스토리를 모험적으로 갱신하고, 분기예측실패 시 히스토리를 복구시키는 메커니즘에 관한 연구의 필요성이 제시되었고, 연구 되었다. 본 논문에서는 분기예측실패 발생 후 분기 히스토리를 복구하는 간단한 복구 메커니즘을 제안한다. 제안한 복구 메커니즘은 기존 분기예측기에 age_counter를 추가하고 분기 히스토리 레지스터 크기를 2배로 확장시킨다. age_counter는 미해결 분기명령어 수를 저장하며, 분기예측실패 후 분기 히스토리 레지스터를 복구하는데 사용한다. Simplescalar 3.0/PISA 툴셋과 SPECINT95 벤치마크 프로그램에서 시뮬레이션 한 결과, 제안된 복구 메커니즘을 gshare와 GAg 예측기에 적용하였을 때 예측 정확도와 프로세서 성능을 개선시킬 수 있었음 을 보여준다. GAg와 gshare 예측기에서 예측정확도는 각각 9.21$\%$와 2.14$\%$가 개선되었고, WC는 18.08$\%$와 8.75$\%$ 개선되었다.

• 한국환경농학회지
• /
• 제39권4호
• /
• pp.360-367
• /
• 2020

BACKGROUND: The productivity and quality of blueberry (Vaccinium ashei Reade) greatly depend on the number of fruits in a plant. Especially, fruit set more than appropriate number negatively affects productivity and marketability due to the increased number of small fruits and delayed harvest time. This study was conducted to investigate proper timing and concentration for applying chemical blossom thinners such as ammonium thiosulfate (ATS) and UREA. METHODS AND RESULTS: ATS at 1.25% and 1.50%, and UREA at 6% and 8% were applied in four developmental stages, bud swell, pink bud, full bloom and petal fall. Fruit thinning rate was calculated based on the number of fruits harvested divided by that of flowers before applying blossom thinners. Ratios of leaf to flower and leaf to fruit were calculated based on the number of fully developed leaves in 25 days after full blossom divided by that of flowers or fruits, respectively. Chemical injury of leaves was investigated by calculating the number of leaves with chemical injury divided by the total number of leaves. Fruit thinning rates were 48% and 66% for UREA treatments at 6% and 8%, respectively, and 49% and 62% for ATS treatments at 1.25% and 1.50%, respectively, in the full bloom stage. In the petal fall stage, fruit thinning rates were 18% and 24% for UREA treatments at 6% and 8%, respectively, and 49% and 35% for ATS treatments at 1.25% and 1.50%, respectively. Leaf to fruit ratio (L/FR) increased by 109% and 188% compared to leaf to flower ratio in ATS treatments at 1.25% and 1.50%, respectively, and L/FR increased 93 and 196% in UREA treatments at 6% and 8%, respectively, in the full bloom stage. In the petal fall stage, leaf to fruit ratio increased by 60% to 100% in ATS treatments, but did not significantly differ from the control in UREA treatments. Fruit harvest was delayed in all treatments of all developmental stages except for 1.5% ATS and 6% UREA treatments at the petal fall stage, whose fruit harvest was two or three days faster than the control. CONCLUSION: The application of ATS and UREA for blossom thinning should be in the petal fall and full bloom stages for early and late harvest, respectively. Considering chemical injury, integrated harvesting and fruit size, however, it is appropriate to apply ATS at 1.5% in the petal fall stage to increase fruit productivity and quality in blueberry.

• 한국경영과학회지
• /
• 제23권2호
• /
• pp.83-101
• /
• 1998

Assembly U-lines are increasingly accepted in industry, especially just-in-time production systems, for the efficient utilization of workforce. In this paper, we present an integer programming formulation and a branch-and-bound method for balancing the U-line with the objective of minimizing the number of workstations with a fixed cycle time. In the mathematical model, we provide the method that can reduce the number of variables and constraints. The proposed branch-and-bound method searches the optimal solution based on a depth-first-search. To efficiently search for the optimal solutions to the problems, an assignment rule is used in the method. Bounding strategies and dominance rules are also utilized. Some problems require a large amount of computation time to find the optimal solutions. For this reason. some heuristic fathoming rules are also proposed. Extensive experiments with test-bed problems in the literature are carried out to show the performance of the proposed method. The computational results show that our method is promising in solution quality.

• Wind and Structures
• /
• 제30권2호
• /
• pp.133-140
• /
• 2020

In this paper, critical fluid velocity and frequency of laminated pipe conveying fluid are presented. Each layer of the pipe is reinforced by functionally graded carbon nanotubes (FG-CNTs). The internal fluid is assumed turbulent and the induced forces are calculated by momentum equations. The pipe is resting on viscoelastic foundation with spring, shear and damping constants. The motion equations are derived based on classical shell theory and energy method. Differential quadrature method (DQM) is used for solution and obtaining the critical fluid velocity. The effects of volume percent and distribution of CNT, boundary condition, lamina layer number, length to radius ration of pipe, viscoelastic medium and fluid velocity are shown on the critical fluid velocity. Results show that with increasing the lamina layer number, the critical fluid velocity increases.

• 한국동물위생학회지
• /
• 제34권2호
• /
• pp.149-152
• /
• 2011

From January to November in 2010, a result of chicken infectious anemia virus (CIAV) antibodies ELISA test about 500 number in 25 broiler breeder farms and 500 number in a broiler chickens slaughterhouse from 25 farms in Iksan area, Jeonbuk. The result of 100% (25/25) positive rate in broiler breeder farms group and 98.6% (493/500) positive rate from each individual. In each week-age group, 98.8% of 18~20 weeks and 98.3% of 21~24 weeks showed positive without any significant differences. In slaughterhouse case, broilers from the farms showed 36.0% (9/25) positive rate and each individual showed 20.4% (102/500) positive rate.

• 한국전자파학회논문지
• /
• 제11권5호
• /
• pp.731-737
• /
• 2000

본 논문에서는 기존의 컨볼루션 부호화(강판정 비터비 알고리즘 사용)에 이용된 Radix-trellis 개념의 디코딩 방법을 Ungerboeck의 TCM/PSK 부호화 변조에 적용하여 TCM/PSK의 고속 복호 방식을 제안한다. 구체적인 예로서 16-stage, trellis 부호화 8-ary PSK의 경우를 다루었다. Radix-4와 Radix-16 격자 디코딩에 대하여 path metric(PM) 및 branch metric(BM) 값의 계산과정을 설명하고 모의 실험을 통하여 I-Q 값, branch metric 값 및 path metric 값 양자화 레벨에 따른 성능을 분석하여 이들의 적정 양자화 이진 심별(binary digit)수를 도출하였다.

• 대한산업공학회지
• /
• 제24권4호
• /
• pp.661-671
• /
• 1998

It is important to minimize the number of disk accesses which is necessary to transfer data in disk into main memory when processing transactions in physical database design. A vertical file partitioning method is used to reduce the number of disk accesses by partitioning relations vertically and accessing only necessay fragments. In this paper, SOFM(Self-Organizing Feature Maps) network is used to solve vertical partitioning problems. This paper shows that SOFM network is efficient in solving vertical partitioning problem by comparing approximate solution of SOFM network with optimal solution of N-ary branch and bound method. And this paper presents a heuristic algorithm for allocating duplicate attributes to vertically partitioned fragments. As branch and bound method requires particularly much computing time to solve large-sized problems, it is shown that SOFM network is able to overcome this limitation of branch and bound method and solve large-sized problems efficiently in a short time.

• ETRI Journal
• /
• 제41권2호
• /
• pp.145-159
• /
• 2019

To reduce the number of radio frequency (RF) chains in multiple input multiple output (MIMO) systems, generalized spatial modulation (GSM) techniques have been proposed in the literature. In this paper, we propose a zero-forcing (ZF)-based detector, which performs an initial pruning of the search tree that will be considered as the initial condition in a sphere decoding (SD) algorithm. The proposed method significantly reduces the computational complexity of GSM systems while achieving a near maximum likelihood (ML) performance. We analyze the performance of the proposed method and provide an analytic performance difference between the proposed method and the ML detector. Simulation results show that the performance of the proposed method is very close to that of the ML detector, while achieving a significant computational complexity reduction in comparison with the conventional SD method, in terms of the number of visited nodes. We also present some simulations to assess the accuracy of our theoretical results.

• 한국약용작물학회지
• /
• 제2권1호
• /
• pp.26-31
• /
• 1994

토천궁(土川芎)의 재식밀도(栽植密度)가 생육(生育) 및 수양(收量)에 미치는 영향(影響)을 조사(調査) 분석(分析)하여 재배기술개선(栽培技術改善)을 위한 자료(資料)로 이용(利用)하고자 시험한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 주당(株當) 경수(莖數)와 엽수(葉數), 주경분지수(株莖分枝數)는 밀식(密植)할 수록 감소되었지만 단위면적당 경수(莖數)와 엽수(葉數), 주경분지수(株莖分枝數)는 증가되었다. 2. 경장(莖長)은 밀식(密植)할 수록 커졌으나 $50{\times}10cm$에서는 약간 작아졌으며 경태(莖太)는 재식밀도간(栽植密度間)에 큰 차이가 없었고 지표면에서 1차분지(分枝)까지의 높이는 밀식(密植)할 수록 높아졌으나 유의성은 인정되지 않았다. 3. 지상부(地上部)와 지하부(地下部) 생육특성(生育特性)은 $m^2$당 경수(莖數)가 많으면 주당(株當) 엽수(葉數)와 주경분지수(株莖分枝數)가 적어지고, $m^2$당 경수(莖數)와 엽수(葉數), 주경분지수(株莖分枝數)가 많아지면 지표면에 서의 1차분지착생(分枝着生)높이가 높아졌다. 4. 10a당 근경수양(根莖收量)은 주당(株當) 경수(莖數)와 엽수(葉數)와는 유의적인 부(負)의 상관(相關)이 인정되었으며, $m^2$당 경수(莖數)와 엽수(葉數), 주경분지수(株莖分枝數)와는 유의적인 정(正)의 상관(相關)이 인정되었다. 5. 개체당(個體當) 근경중(根莖重)과 세근중(細根重)은 밀식(密植)할 수록 작아졌으며 10a당 근경(根莖)과 세근(細根)의 수양(收量)은 오히려 밀식(密植)할 수록 증가되었다.