• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.148-150
• /
• 2006

This paper describes the overvoltage at the branch line in underground distribution systems when the direct lightning surge strikes on conductor of overhead line. Distribution systems are very complex because it includes many branch lines, transformers, switches and so on. Therefore model system consists of overhead distribution lines, underground cable include branch lines, lightning source and switches. Analysis are performed using EMTP to understand and evaluate the surge behavior on branch lines considering various conditions in underground distribution systems. Simulation results show overvoltage with location in various cases. It is evaluated that result will be used to establish protection methods in actual underground distribution systems.

• Korean Journal of Veterinary Service
• /
• v.15 no.2
• /
• pp.128-133
• /
• 1992

To obtain the basic data for blood chemistry, the effects of the time elapse of serum separation on bovine blood chemical values were investigated. The results obtained are summerized as follows : 1. The constant fluctuation tendency and significance was not detected in GOT, GPT, BUN, Creatinine, ALP, CPX, Cholesterol, Ca, Mg and Pi. 2. Glucose showed the decrease tendency according to the time elapse of serum separation. As the values at 12 and 24 hours showed significant lower values than those at 1 and 2 hours (p＜0.01) it was thougth that separation time of serum should be focussed for the glucose determination.

• Korean Journal of Veterinary Service
• /
• v.31 no.3
• /
• pp.363-367
• /
• 2008

This study was carried out to investigate an epidemiological state of neosporosis in Korean indigenous cattle in Uljin. Bloody samples were collected from 552 female cattle (337 farms), more than 5 years old, in 10 districts of Uljin, Antibody to N caninum were examined by enzyme linked immunosorbent assay (ELISA). Seroprevalence of individual and farm were 7.6% (42/552) and 8.6% (29/337), respectively. Positive rates by districts was variable $(0%{\sim}14,9%)$, and it was seemed to be a tendency that positive farms gathered with in a small zone. In seroprevalence by herd size farms having between 5-9 heads was top (37%), but there was no significant difference among herd size.

• Journal of Information Technology Applications and Management
• /
• v.22 no.2
• /
• pp.1-17
• /
• 2015

In this research, we develop and suggest branch and bound algorithms for a two-machine permutation flowshop scheduling problem with the objective of minimizing makespan. In this scheduling problem, after each job is operated on the machine 1 (first machine), the job has to start its second operation on machine 2 (second machine) within its corresponding limited waiting time. In addition, each job has its corresponding ready time at the machine 1. For this scheduling problem, we develop various dominance properties and three lower bounding schemes, which are used for the suggested branch and bound algorithm. In the results of computational tests, the branch and bound algorithms with dominance properties and lower bounding schemes, which are suggested in this paper, can give optimal solution within shorter CPU times than the branch and bound algorithms without those. Therefore, we can say that the suggested dominance properties and lower bounding schemes are efficient.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.273-274
• /
• 2001

This paper presents the effects on 154kV electrical power customers' productive activities by the instantaneous voltage sag or interruption in power system. According to the survey all respondents (8customers) experienced the breakdown of facilities when instantaneous voltage sag over about twenty percents of pre-fault occurred in power system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.8
• /
• pp.995-999
• /
• 2014

In this paper, a new size-reduction approach for branch-line coupler is introduced which uses parallel end-shorted coupled lines with lumped capacitors. The characteristic of the new design was analyzed using even-odd mode method, and simulated on HFSS before fabricated on the FR4 epoxy glass cloth copper-clad plat (CCL) PCB substrate at center frequency of 1 GHz. The electrical length of transmission line was reduced to 15 degrees, therefore the size of branch-line coupler was largely reduced approximately maintaining the same characteristic around the stable center frequency. The insertion loss of the branch-line coupler filter was -4.39 dB. The size of the overall hybrid is $20mm{\times}20mm$. Measurements results were well agreed with the simulated ones.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.189-194
• /
• 2011

Metallurgical grade silicon was recovered from slurry waste for ingot sawing process by acid leaching and thermal treatment. SiC abrasive was removed by gravity concentration and centrifugation. Metal impurities were removed by the acid leaching using HF/HCl. The remaining SiC was separated by the thermal treatment at $1600^{\circ}C$ in an inert atmosphere by the difference in melting points. The purity of the obtained silicon was found to be around 99.7%.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1704-1709
• /
• 2014

In order to increase the performance of multi-core system processor architectures, the multi-thread branch predictor which speculatively fetches and allocates threads to each core should be highly accurate. In this paper, the perceptron based multi-thread branch predictor is proposed for the multi-core processor architectures. Using SPEC 2000 benchmarks as input, the trace-driven simulation has been performed for the 2 to 16-core architectures employing perceptron multi-thread branch predictor extensively. Its performance is compared with the architecture which utilizes the two-level adaptive multi-thread branch predictor.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.299-304
• /
• 2008

This paper presents plastic limit loads of piping branch junctions with local wall thinning under combined pressure and in-plane bending, based on systematic three-dimensional finite element limit analyses using elastic-perfectly plastic materials. An ideal branch junction without weld or reinforcement around the intersection is considered with two locations of wall thinning; one in the run pipe, and the other in the branch pipe. Based on FE results, effects of thinning geometries on plastic limit moments are quantified and simple approximations of plastic limit loads are proposed.

• Journal of ILASS-Korea
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2015

Visualization of the mixing pattern in a non-element mixer was carried out using laser induced fluorescence(LIF) to evaluate characteristics of mixer consisting of the main flow pipe and branch flow pipes. The branch flows were injected periodically with the period $T_{in}$ normal to the main flow, and rhodamine B was mixed into the most upstream branch flow to visualize mixing pattern in the main flow pipe by LIF. The length of boundary line L of the LIF image was measured. In this study, a numerical analysis was performed to identify the mixing process of the non-element mixer, and the results were compared with experimental results. Each result was almost the same. When the number of branch flows is increased, the mixing pattern became complicated and was supposed to become chaotic. The length of boundary line L increased exponentially with an increase in the number of branch flows.