• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.83-90
• /
• 2012

Driver ordinarily takes sudden braking when urgent situation is developed or when the vehicle is involved in an unexpected accident. Therefore, the most common trace at a traffic accident scene is skid mark. Currently, in investigating traffic accident, overspeed is determined by the length of skid mark. However, in order to identify accurate cause of accident, estimation of pre-braking speed which takes into account speed reduction during transient time should be considered as a requirement. In a recent study, several ways to estimate pre-braking speed were suggested, but none considered to differentiate the decelerating transient brake section and skidding section. This study analyzed trends of decelerating transient brake section and skidding section by real braking test.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.314-315
• /
• 2011

This paper introduces the design and control method of braking chopper circuit which can supply input power to ventilation inverter of traction control system. The DC input voltage from auxiliary block (static inverter) is normally used as an input of ventilation inverter. It converts DC input to AC output voltage to drive cooling fans for traction control system and traction motors. The electrical braking force is very important for high speed train to guarantee safety even though the train is running in the dead section where the pantograph voltage is not supplied. When the high speed train decelerate speed in dead section, the regenerative energy is dissipated by braking resistor. This paper proposed the braking chopper control method to implement rheostatic braking function and the appropriate chopper circuit for supplying voltage source to ventilation inverter during rheostatic braking mode. The proposed chopper circuit makes it possible for traction control system to regenerate power continuously regardless of the existence of pantograph voltage. The feasibility of proposed braking chopper control and circuit were proven by inertia load test and actual train field test.

• Journal of Environmental Science International
• /
• v.15 no.3
• /
• pp.287-292
• /
• 2006

The purpose of this paper is to evaluate the noise level and source, reduce the subway line II noise. As a result of measurement of subway line II in Busan the highest value section of uproad line was from Jigegol to Motgol by 89 dB(A). The sections of conversation and listening interference(over 80 dB(A)) were 21 sections(55%) of 38 sections. Among these sections, 15 sections(71%) were produced rolling noise, 3 sections(14%) squeal noise, 2 sections(10%) braking noise and 1 section(5%) fan noise, and then a main noise source was the rolling noise. In case of downroad line, the highest value section was from Busan Metro Art Museum to Centum city, Motgol to Jigegol by 88 dB(A). The sections of conversation and listening interference(over 80 dB(A)) were 18 sections(47%) of 38 sections. Among these sections, 15 sections(83%) produced rolling noise, 2 sections(11%) squeal noise and 1 section(6%) braking noise were investigated in this study. and then a main noise source was the rolling noise.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.451-454
• /
• 1995

Increasing the transfortation efficiency is very important issue in railway system. Speed-up of train and shortage of headway can be its solution. Headway can vary with blocksection length, characteristics of the railway and signalling systems. Safety braking distance needed for passenger's safety is very important factor in block section division method. In this study, basic block section division program was developed with the differential ratio of braking distance resulted by grade value of the track. More complete block section division program is going to be developed by the help of experienced experts.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.115-122
• /
• 2011

This paper investigates the accuracy of the vehicle pre-braking speed estimated based upon measured skidding distance. Driver ordinarily takes sudden braking when urgent situation is developed in the front or when the driver is involved in an unexpected situation, and the driver may be inflicted upon an accident depending on the required stopping distance. Among factors influencing the stopping distance of vehicle such as recognition response time of driver, performance of vehicle's braking device, and state of road surface etc, pre-braking speed is seemingly the most important influencing factor. Currently, in the investigating section of traffic accidents, the state of overspeed is determined by the pre-skidding speed calculated based on the length of skid mark. In order to identify the accurate cause of the accident, it is strongly recommended that estimation of pre-braking speed should be estimated taking into account speed reduction during transient time. In this study, we propose a method for estimating more accurate exact speed information of vehicle at the time of traffic accident. The outcomes from this study potentially help better understanding of the characteristics of vehicle for traffic safety in the future.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2135-2146
• /
• 2011

The rail surface irregularity is generated severely by train braking effect in the section of station. The braking force increases slip rate and friction factors caused by wheel-rail contact points. It brings rail surface irregularity as well. In this study, interactions between wheel and rail were investigated using rolling contact fatigue theory and mechanism of rail degradation through fracture mechanics. For the more, the Von-Mises stress occurred on the rail due to the interaction between wheel and rail was analyzed using 3-D finite element method. The amounts of surface irregularity of rail were measured according to accumulated passing tonnage in urban railway in fields. Therefore, the maintenance of rail should be separated by running and braking sections to prevent RCF defects.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.316-323
• /
• 2000

In railway train operations, a braking distance between two trains must be controlled on their speeds to avoid rear end collisions. The distance is decided by some parameters such that propulsion and braking performance of trains, gradient and etc. When determining this block distance, it is important to consider the two aspects that safety insurance at train running and increase of train running frequency. In this paper, we showed a methodologies of equiblock by consideration gradients and calculated optimal block speeds on the basis of the equivalent block distance.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.99-106
• /
• 2011

In this study, the analysis technique, which can estimate the temperature rise and thermal deformation of the ventilated disc considering the vehicle information, braking condition and properties of the disc and pad, is developed. The analytical process of the braking power generation during braking is mathematically derived. The thermal energy, which is applied to the surface of a disc as heat flux, is calculated. Then, the temperature rise and thermal deformation of a disc are estimated using FE software, SAMCEF. Shape of the cross section of the disc is optimized according to the response surface analysis method in order to minimize the temperature rise and thermal deformation. The hot judder analysis is done using the optimized disc, and the analysis results are discussed.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.607-612
• /
• 2007

In this paper, operation mode of train was divided into powering, coasting, and braking and rail wear phenomenon has been done comparative analysis by each section. Data of train velocity is transferred to acceleration and deceleration from ATO Logging data. Amount of rail wear has been done comparative analysis by traction force of acceleration and braking force of deceleration and a plan for management of track irregularity is come up with by the result of the analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.93-101
• /
• 2010

The effects of braking of trains and roughness of rails on the dynamic behavior of bridges are studied. The train-bridge interaction is considered by solving Lagrange's equation of motions. Newmark's direct integration is used to solve the governing equations. Dynamic train loads acting on piers at each time step are evaluated, and the wheel-rail roughness effect is considered by using the PSD curve of the rail. The model of braking forces in bridge section is based on the change of deceleration mentioned in ASTM(American Society for Testing and Materials) E503-82. Only skidding frictions without considering rolling frictions are modeled, and the friction coefficient of 0.25 is assumed. Parametric studies in a simply supported PC Box girder bridge are carried out to verify the present method and to analyze the effects of train speed, wheel-rail roughness, braking forces on dynamic train loads.