• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.798-803
• /
• 2007

The brake system of railway plays an important role to enhance the speed of train, and the brake disc is one of major components relating to frictional braking. The performance enhancement of brake disc directly affects the braking performance of train. It is required to understand and investigate the factors need to be considered for the development of new brake disc with improved materials and performance. In this study, through the literature reviews of previous study, several factors including thermal crack phenomena, friction coefficient, materials and durability of disc, temperature characteristics, etc., were introduced for the design of improved brake disc. Moreover, based on the review results, the design direction of new brake disc was suggested. Eventually, a new brake disc with improved performance would be developed based on this investigation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.26-31
• /
• 2000

There are various noises generated by friction. Among the rest, eliminating squeal noise generated during braking is an important task for the improvement of vehicle passengers' comfort. The parameters affecting brake squeal noise are the material properties of the braking pad, the dynamic properties of the brake parts and the dimensions of the brake assembly etc. Also, the squeal noise changes its inherent form with the normal load and sliding speed. In this study, the characteristics of brake squeal noise generated by friction is analyzed experimentally. The experiment focused on the analysis of friction self-excited vibration and squeal noise level. Friction self-excited vibration is caused by the dry friction between pads and rotor, and occurs as a function of their relative sliding speeds. And Friction self-excited vibration is raised the brake squeal noise.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2561-2563
• /
• 2000

In this paper, a mathematical vehicle model, the braking force control parameters, the wheel control logic, and vehicle control strategy are presented, in order to analyze the dynamic characteristics of a vehicle equipped with ABS(Antilock Brake System). The full vehicle dynamics model is constructed with sprung mass, brake system, and wheels to verify control algorithms. The valve control algorithms are designed with the wheel accelerations and slip ratio take into consideration. Theses algorithms are applied to the front and rear wheels independently. Simulation is performed under the wet road condition at initial braking speed of 60 [km/h].

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.274-280
• /
• 2006

The study is to analyze dynamo test results for various commercial pads in order to verify the performance of brake disk with CV-NCM cast iron. The developed brake disk will apply to 200 km/h tilting trains that is being developed as one part of project for speed-up on Korean existing railroad. The test program is made out suitably for braking condition and performance of test equipment by referring UIC 541-3. Two kinds of resin pad and one kind of foreign sintered pad suitable for 200 km/h trains are used as various commercial pad for the dynamo test. The data aquisition for the maximum and smallest temperature, hot spot, etc. on disk and pad is performed by using the thermocouples and thermal imaging cameras. From this research, we obtained braking characteristics between CV-NCM cast iron disk and pad of various material and will be utilized usefully as basis data of performance optimization of developing sintered pad.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.31-42
• /
• 2012

Urban transit vehicle that uses electrical energy, is faster, safer and energy-efficient public transit than other means. As a Research method, the Matlab/Simulink are used to modeling a regenerative brake-capable train, and actual parameters such as powering and braking characteristics, all kinds of resistance, passenger load, velocity, gradient, radius of curve etc and powering and breaking commands per time or distance are inputted to train's dynamic equation, then a simulation program is made and used to yield train driving pattern and driving time and the amount of driving energy used thereby at auto and manual operation and at all sector.

• 대한전기학회논문지
• /
• 제34권3호
• /
• pp.115-123
• /
• 1985

A two phase chopper system with two separate groups of DC motors for regenerative braking is dealt with in this article. The main circuit consists of two sets of chopping parts, four diodes and two separate groups of DC motors. Although the proposed chopper circuit requires more circuit elements than the conventional two phase chopper system with combined output, it has the following advantages`(1). Ripple frequency of smoothing reactor current becomes twice as high as that of the conventional system, so the continuous current range and the ripple ratio are improved greatly. Therefore, the efficiency becomes even higher, the capacity of commutation equipment is reduced and the inductive interference become less.(2). Load current division becomes equalized. Therefore it is possible to drive not only series motors but also shunt, separately excited and compound motors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.451-454
• /
• 1995

Increasing the transfortation efficiency is very important issue in railway system. Speed-up of train and shortage of headway can be its solution. Headway can vary with blocksection length, characteristics of the railway and signalling systems. Safety braking distance needed for passenger's safety is very important factor in block section division method. In this study, basic block section division program was developed with the differential ratio of braking distance resulted by grade value of the track. More complete block section division program is going to be developed by the help of experienced experts.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.120-127
• /
• 1996

Anti-lock Brake System has been developed to reduce tendency for wheel lock and improve vehicle control during sudden braking on slippery road surfaces. This is achieved by controlling the braking pressure, avoiding wheel lock, while retaining handling and brake performance. This paper is concerned about pressurecharacteristics of hydraulic modulator. Experimental sets which is consists of hydraulic modulator, duty controller, pressure regulator, pressure senset is consuructed. System modelling and computer simulation are performed for comparison with experimental results. Brake wheel pressure are measured under various driving pulse. The result of experiment show fairly agreement with the simulation. As a result, it is known that wheel pressure is affected by duty ratio, orifice diameter through computer simulation.

• 자동차안전학회지
• /
• 제9권2호
• /
• pp.13-19
• /
• 2017

This paper presents safety assessment scenarios for cyclist autonomous emergency braking(AEB) system. To assess the safety performance of AEB in real traffic situation with limited number of scenarios, scenario should reflect the characteristics of real traffic collision cases. For this, statistic data of real traffic car-to-cyclist collision in Korea are analyzed. Many types of accidents are listed and categorized based on the movement of vehicle and cycle just before the collision. Then, the characteristics, main issues and limitations of each scenarios are discussed. Not only the test scenario itself but also the cost and time for the test are very important issues for the test scenarios to actually repeat the test for various systems. Also, the performance of AEB can be effected by the algorithm of AEB and the technical limitation of the sensors and hardwares. Therefore, required number of tests, possibility of dummy destruction and other technical issues are discussed for each scenarios. Based on these information, typical scenarios are selected. Also, using this information, vehicle speed range, cyclist speed and collision point are established. Proposed scenarios are verified and modified based on the vehicle test results. vehicle test was evaluated 5 times for each scenarios. Based on this results, final test scenarios are modified and proposed.

• 융복합기술연구소 논문집
• /
• 제11권1호
• /
• pp.19-23
• /
• 2021

These days, sales of battery electric vehicles have been rapidly increasing due to the strict CO₂ regulations. However, since it take too long to measure the energy economy of electric vehicles, it has been required to improve the procedure of energy economy measurement. In order to improve this problem, the present study analyzed the battery charge/discharge pattern according to the changes in battery SOC (state of charge). In general, the energy economy test is started with a battery SOC charged to 100 %. However, it was identified that when the battery is fully charged, it can actually be charged over the 100 % (e.g., 100.5 %). This can induce errors in the energy economy measurement. Therefore, the present study recommend to start the test at SOC 99.9 %. The regenerative braking was partly restricted for the SOC over 90 %. This made it difficult to estimate the overall energy economy of the electric vehicle. However, it was identified that there was no change in the battery charge/discharge characteristics under the SOC 90 %. Therefore, the energy economy test can be shortened by predicting the overall energy economy through a short mileage test.