• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.91-93
• /
• 1998

This paper describes the braking performance of the eddy current brake for high speed trains according to the number of poles. The eddy current brake systems have to be equipped with the maximum braking force and deceleration in the given volume or mass, high braking force rate, as small normal forces as possible and stable construction. The parameters, such as the number of poles, electric ampere turns, slot width have influence on the braking force characteristics. In this paper, the effect of braking performance from the variation of the number poles is calculated by using FEM, the number of the pole which makes the maximum braking force is proposed.

• Tribology and Lubricants
• /
• 제28권5호
• /
• pp.246-251
• /
• 2012

Disc brakes and brake linings are part of the braking system in automobiles; this system works due to the braking power between the disc and pad. Vehicle braking systems have complex environments due to the geometry of the disk and pad, the material properties, the braking conditions, etc. Braking energy is converted into thermal energy during the braking process, due to the frictional heat between the disc brake and pad. This heat is changed to a heat flux, which affects the thermal stress of the disc. The purpose of this study was to use the fluid dynamics software ANSYS CFX to investigate the inner flow characteristics of the air and the heat transfer of the disc, and to analyze the effects on the thermal stress of the disc brake.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1585-1588
• /
• 2003

Based on the design requirements for the rubber-tired AGT light rail vehicle. the braking system was designed. Its major components are a brake operating unit, a pneumatic-hydraulic transfer, screw compressor, oil separator. air dryer, hydraulic caliper. After the components of braking system were manufactured. some factory tests were executed to evaluate their performances. The Results of these tests can guarantee a performance. safety of the braking system developed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.85-86
• /
• 2006

It presented the approach method for the station braking noise present condition and a braking noise reduction plan escape of the KTX train. The research which it sees the technical ground it will be able to accomplish the station braking noise reduction of the KTX vehicle with base the questing matter where the escape one thing is big there is a possibility of doing.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1916-1921
• /
• 2008

In the braking process of rolling stocks, the equivalent braking force is applied to the all bogies. However, the load applied to the front and rear bogie are different in the actual commercial traveling. In the case, since the different slip situation is occurred in each bogie, it is essential to use the independent anti-slip control per bogie unit in order to reduce the loss of braking force. In this paper, the algorithm about bogie unit braking is proposed and verified.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.294-299
• /
• 2006

Korean high speed train(HSR-350x) has adopted a combined electrical and mechanical(friction) braking system. Brake blending control unit(BBCU) controls each brake system to fulfill the required brake performances such as braking distance, deceleration and jerk. When the disc brake is applied in the high speed region, the wear of pad is increased rapidly. In this paper, we discuss the optimized patterns of the disc brake force from the view point of braking energy.

• International Journal of Railway
• /
• 제2권4호
• /
• pp.139-146
• /
• 2009

Vehicle braking in non-electrified rail systems wastes energy. Advanced flywheel technology presents a way to capture and reuse this braking energy to improve vehicle efficiency and so reduce the operating costs and environmental impact of diesel trains. This paper highlights the suitability of flywheels for rail vehicle applications, and proposes a novel mechanical transmission system to apply regenerative braking using a flywheel energy storage device. A computational model is used to illustrate the operation and potential benefits of the energy storage system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.314-315
• /
• 2011

This paper introduces the design and control method of braking chopper circuit which can supply input power to ventilation inverter of traction control system. The DC input voltage from auxiliary block (static inverter) is normally used as an input of ventilation inverter. It converts DC input to AC output voltage to drive cooling fans for traction control system and traction motors. The electrical braking force is very important for high speed train to guarantee safety even though the train is running in the dead section where the pantograph voltage is not supplied. When the high speed train decelerate speed in dead section, the regenerative energy is dissipated by braking resistor. This paper proposed the braking chopper control method to implement rheostatic braking function and the appropriate chopper circuit for supplying voltage source to ventilation inverter during rheostatic braking mode. The proposed chopper circuit makes it possible for traction control system to regenerate power continuously regardless of the existence of pantograph voltage. The feasibility of proposed braking chopper control and circuit were proven by inertia load test and actual train field test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.519-524
• /
• 2004

This study is concerned with the braking distance estimation using frictional energy rate. First, steady state rolling analysis is performed, and using this result, the braking distance is estimated. Dynamic rolling analysis during entire braking time period is impratical, so that this study divides the vehicle velocity by 10km/h to reduce the analysis time. The multiplication of the slip rate and the shear stress provides the frictional energy rate. Using frictional energy rate, total braking distance is estimated, In addition, ABS(Anti-lock Brake System) is considered, and two type of slip ratios are compared, One is 15% slip ratio for the ABS condition, and the other is 100% slip ratio which leads lo the almost same braking distance as the elementary kinematic theory. A slip ratio is controlled by angular velocity in ABAQUS/Explicit, A 15% slip ratio gives the real vehicle's braking distance when the frictional energy occurred al disk pad is included. Disk pad's frictional energy rate is calculated by the theoretical approach.

• 한국도시철도학회논문집
• /
• 제6권4호
• /
• pp.319-326
• /
• 2018

열차제어시스템에서 열차간 추돌을 방지하기 위한 안전간격은 열차의 비상제동에 따른 제동거리를 기반으로 한다. 제동거리 성능평가는 동역학적 해석과 시운전시험을 통한 확인이 있으나 두 방법 모두 차륜과 레일의 점착계수의 약화 등과 같은 조건을 모두 고려할 수 없기 때문에 열차제어시스템의 설계에 활용하기에는 충분하지 않다. 따라서 본 연구에서는 다양한 환경을 고려할 수 있는 몬테카를로 방법을 이용하여 제동성능을 분석하고자 하였다. 제동모델은 비상제동에서 사용하는 공기제동을 기초로 하였으며, 제동압력, 제동효율, 제동 마찰계수, 점착계수, 차량의 질량분포 등을 고려할 수 있도록 모델링하였다. 영향 인자 분포의 변화에 따른 제동성능의 변화를 검토하고 이를 바탕으로 제동장치의 품질 제어를 통해 제동성능은 개선될 수 있음을 확인하였다. 또한, 열차를 구성하는 차량 편성에 따라 제동성능의 변화를 확인하였다. 본 연구의 결과는 향후 열차제어시스템의 안전간격 설계의 기초자료로 활용될 뿐 아니라 철도차량의 제동성능 향상의 근거자료로 활용될 수 있을 것으로 예상된다.