• Journal of the Korean Professional Engineers Association
• /
• v.17 no.4
• /
• pp.28-39
• /
• 1984

Experiments were carried out for the development of a processing method of soybean into full-fat or defatted flour, using two varieties of soybean (kwangkyo produced in Korea and Bragg produced in India) Samples were subjected to dry dehulling, size reduction and wet heat treatment processes to make soybean flours. The quality of soybean flours were evaluated, and the results obtained were summarized as follows. 1. Crude fiber content of dehulled soybean was under 3.0% which indicated satisfactory dehulling, and there was no significant difference in crude fibre content between two varieties. 2. When dehulled soybean was cracked into soy grits by a hammer mill, 98.71∼98.86％ of the soy grit was in the range of 10∼18 mesh which was the optimum size of particle for quick and uniform penetration of heat into the intra-particle air spaces. 3. Moisture content of soy flour after steam treatment at 15 psig for 5 to 30 min was only 0.29∼1.68% which did not hinder the next milling operation. 4. From the color analysis of soy flours, it was observed that the dominant wavelength for all the samples are in a very narrow range from 575 to 581 nm and the color variation was from yellow to yellowish orange. Twenty to twenty five ％ higher reflectance was observed in the defatted flours than full fat flours. The ％ chroma of the defatted flour slightly increased as the duration of steaming of soy grits increased, whereas that of the full-fat flour did not. 5. The protein extractability in the defatted flour at pH 7.6 showed progressive decrease in solubility from 48.40％ (Bragg), 75.20％ (kwangkyo) for untreated flours to 9.75％ (Bragg), 26.27％ (kwangkyo) for 30 min steaming. But Kwangkyo variety showed twice higher protein extractability than Bragg variety.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.421.2-421.2
• /
• 2016

고효율 태양전지에서 후면 반사 방지막은 장파장대(900nm~1200nm) 빛의 내부 반사를 증가시켜 광흡수도를 개선한다. 태양전지 후면에 박형 절연층 구조를 구성함으로써 특정 파장에서 높은 반사도를 얻을 수 있는 Bragg mirror 구조를 이론적으로 계산할 수 있다. Bragg mirror 구조를 이용하여 태양전지의 후면 반사층(Rear reflector layer)을 형성함으로써 태양전지 내부의 광흡수도를 개선할 수 있다. 후면 반사 방지막(Rear anti-reflection coating)으로 사용되는 Al2O3와 SiOxNy 또는 이러한 두 가지 물질의 겹층 구조를 구성하여 장파장대 빛의 반사도 차이에 의한 광흡수도 개선 정도를 광학 시뮬레이션을 통해 계산하였다. 광학 시뮬레이션은 TCAD를 이용하였으며 두 가지 겹층 구조에서 각 반사 방지막의 두께에 따른 단락 전류(Jsc)의 개선 정도, 후면 반사층 두께의 최적화 조건을 계산하였다. 후면 반사방지막을 제외한 기본적인 태양전지 구조는 n-type PERC 구조를 사용하였으며, 후면 반사방지막만의 광학적 특성을 살펴보기 위해 전극은 광학적으로 투명하다고 가정하였다. 반사방지막 두께의 범위는 Al2O3(5-30nm), SiNx(150-300nm), SiOxNy(150-300nm)에서 수행하였으며, 각각 1nm, 2nm 간격으로 진행하였다. Al2O3/SiOxNy 구조에서는 단락 전류가 32.45-32.87mA/cm2 값을 가진다. Al2O3/SiNx 구조에서는 단락 전류가 32.59-32.87mA/cm2 값을 가진다. 결론적으로, 후면 반사방지막의 겹층 구조를 통해 광흡수도를 증가 시킬 수 있으며, TCAD 시뮬레이션을 통하여 입사되는 태양광 스펙트럼에 최적화된 구조를 설계할 수 있다.

• Journal of Integrative Natural Science
• /
• v.7 no.4
• /
• pp.221-226
• /
• 2014

Optically encoded porous silicon smart particles were successfully fabricated from the free-standing porous silicon thin films using ultrasono-method. DBR PSi was prepared by an electrochemical etch of heavily doped $p^{{+}{+}}$-type silicon wafer. DBR PSi was prepared by using a periodic pseudo-square wave current. The surface-modified DBR PSi was prepared by either thermal oxidation or thermal hydrosilylation. Free-standing DBR PSi films were generated by lift-off from the silicon wafer substrate using an electropolishing current. Free-standing DBR PSi films were ultrasonicated to create DBR-structured porous smart particles. Optical characteristics of porous smart particles were measured by FT-IR spectroscopy. The surface morphology of porous smart particles was determined by FE-SEM.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.474-480
• /
• 2008

In order to make full color cholesteric displays, color filter-less R, G, B sub-pixel structured cholesteric LC cells have been studied. To make R, G, B colors, UV induced pitch variant chiral dopant was added to cholesteric LC mixtures. The concentration of the photo-sensitive chiral dopant was adjusted so that the initial state showed blue color and the color was changed from blue to green and red with increase of UV irradiation to the cholesteric cells. To prevent the mixing of R, G, B reflective sub-pixel liquid crystals, separation walls were formed using negative photo resister in boundary area between sub-pixels, Through the optimization of the material concentrations and UV irradiation condition, vivid R, G, B colors were achieved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.394-395
• /
• 2007

In order to make full color cholesteric displays, color filter-less R, G, B sub-pixel structured cholesteric LC cells have been studied. To make R, G, B colors, UV induced pitch variant chiral dopant was added to cholesteric LC mixtures. The concentration of the photo-sensitive chiral dopant was adjusted so that the initial state showed blue color and the color was changed from blue to green and red with increase of UV irradiation to the cholesteric cells. To prevent the mixing of R, G, B reflective sub-pixel liquid crystals, separation walls were formed using negative photo resister in boundary area between sub-pixels. Through the optimization of the material concentrations and UV irradiation condition, vivid R, G, B colors were achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.433-439
• /
• 2003

In this paper, we proposed a novel true time-delay (TTD) feeder for phased array antennas (PAAs) using fiber Bragg gratings (FBGs) and fibers coated with Cr/Au film. This structure requires less number of FBGs than the previously proposed FBG TTD feeders since one FBG is replaced with a metal film reflector in a strand of optical delay line connected to each antenna element and also provides the flexible wavelength selection since the metal film shows wide reflectance spectrum. A TTD for 10 GHz linear PAAs capable of steering beams in three different directions at 0$^{\circ}$and $\pm$30$^{\circ}$has been built. Experimental results on time delays are in good agreement with those calculated at all the steering angles. A 10 GHz linear array antenna with eight antenna elements red from the proposed TTD has been designed and the far-field radiation pattern or this antenna has been obtained by simulation.