• 통합자연과학논문집
• /
• 제2권1호
• /
• pp.45-49
• /
• 2009

Electrochemical etching of heavily doped p-type silicon wafers (boron doped, <100> orientation, resistivity; $0.8-1.2m{\Omega}/cm$) with different current density resulting two different refractive indices resulted in DBR (Distributed Bragg Reflectors) porous silicon, which exhibited strong in-plane anisotropy of refractive index (birefringence). Dielectric stacks of birefringent porous silicon acting as distributed Bragg reflectors have two distinct reflection bands depending on the polarization of the incident linearly polarized light. This effect is caused by a three-dimensional (in plane and in depth) variation of the refraction index. Optical characteristics of DBR porous silicon were investigated.

• 한국광학회지
• /
• 제15권6호
• /
• pp.485-489
• /
• 2004

색 분산과 색 분산 경사를 보상하기 위하여 결합 계수가 파장 축을 따라 첩 된 순 위상 샘플링 광섬유 Bragg 격자를 제안하였다. 기존의 샘플링 주기의 첩과 결합 계수의 첩을 동시에 이용하여 동일한 파장 다중 채널들의 대역폭들을 얻을 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.309-319
• /
• 2001

This paper demonstrates the development of optical temperature sensor based on the etched silica-based planar waveguide Bragg grating. Topics include design and fabrication of the etched planar waveguide Bragg grating optical temperature sensor. The typical bandwidth and reflectivity of the surface etched grating has been ∼0.2nm and ∼9%, respectively, at a wavelength of ∼1552nm. The temperature-induced wavelength change is found to be slightly non-linear over ∼200$^{\circ}C$ temperature range. Typically, the temperature-induced fractional Bragg wavelength shift measured in this experiment is 0.0132nm/$^{\circ}C$ with linear curve fit. Theoretical models with nonlinear temperature effect for the grating response based on waveguide and plate deformation theories agree with experiments to within acceptable tolerance.

• Journal of information and communication convergence engineering
• /
• 제4권2호
• /
• pp.88-91
• /
• 2006

In this paper, a novel physical structure for planar spiral inductors is proposed. The spiral inductors were designed and fabricated on multi-layered substrate Bragg-reflector/silicon (BR/Si) wafer. The impacts of multi-layered structure substrate and pattern on characteristics of inductor were studied. Experimental results show that the inductor embedded on Bragg reflector/silicon substrate can achieve the best improvement. At 0.4-1.6 GHz, the Bragg reflector seems to significantly increase the S11-parameter of the inductor.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.51-56
• /
• 2006

This paper shows the development of flexible force sensor using the fiber Bragg grating. This force sensor consists of a Bragg grating fiber and flexible silicone rubber (DC184, Dow corning co. Ltd). This sensor does not have special structure to maximize the deflection or elongation, but have good sensitivity and very flexible characteristics. In addition, this sensor has the immunity to the electro magnetic field and can be multiplexed easily, which is inherited from the characteristics of fiber Bragg grating sensor. In the future, this sensor can be utilized the tactile sensor system minimizing the sensor size and developing the fabrication method.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.87-88
• /
• 2006

Bragg fibers, consisting of a low index core (including air) surrounded by a series of periodic layers of alternate high and low refractive index materials, each being higher than that of the core, form a 1D photonic bandgap (PBG). In view of the multitude of individual physical parameters that characterize a Bragg fiber, they offer a wide choice of parametric avenues to tailor their propagation characteristics. Owing to their unique PBG guidance mechanism, Bragg fibers indeed exhibit unusual dispersion characteristics that are otherwise nearly impossible to achieve in conventional silica fibers. Solid core Bragg fibers, amenable to fabrication by the highly mature MCVD technology, could be designed to realize broadband supercontinuum light. This talk would review our recent works on modeling of propagation characteristics, dispersion tailoring in them for applications as metro as well as dispersion compensating fibers and also as supercontinuum light generators.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2303-2305
• /
• 2005

현재 광통신 분야는 보다 많은 정보를 동시에 전송하기 위해 다양한 다중화 방식들을 요구 받고 있다. 광섬유 Bragg 격자 소자를 이용한 모든 광 분기/결합 장치는 분기/결합할 수 있는 신호가 광섬유 격자 소자의 Bragg파장에 의해 정해지므로 하나의 광섬유 격자 소자는 고정된 한 채널만을 분기, 결합할 수 있다는 단점을 지니고 있다. 그러나 광섬유 격자에 온도와 스트레인(strain) 같은 외부 물리량을 가하게 되면 광섬유 격자의 주기가 변하게 되어 반사파장이 고정되지 않고 파장을 가변 할 수 있는 장점을 가지게 된다. 이에 본 논문에서는 광섬유 격자 소자에 가해진 온도, 스트레인에 의해 Bragg파장이 변화하는 성질을 이용하여 파장 가변형 Bragg 격자를 제작 및 실험을 통하여 전광필터 특성에 대하여 제시하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.255-258
• /
• 2006

In this paper, a novel physical structure for planar spiral inductors is proposed. The spiral inductors were designed and fabricated on multi-layered substrate Bragg-reflector/silicon (BR/Si) wafer. The impacts of multi-layered structure substrate and pattern on characteristics of inductor were studied. Experimental results show that the inductor embedded on Bragg reflector/silicon substrate can achieve the best improvement. At 0.4-1.6 GHz, the Bragg reflector seems to significantly increase the $S_{11}-parameter$ of the inductor.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.951-963
• /
• 2015

The water wave characteristics of Bragg reflections from a train of fixed floating pontoon breakwaters was studied numerically. A numerical model of boundary discretization type was developed to calculate the wave field. The model was verified by comparing to analytical data in literature and good agreements were achieved. Series of parametric studies were conducted systematically to investigate the dependence of the reflected coefficients by the Bragg scattering on the design variables, including the spacing between the breakwaters, the total number of installed breakwaters, the draft and width do the breakwater, and wave length. Certain wave characteristics of the Bragg reflections were observed and discussed in details which might be of help for practical engineering applications in shoreline protection from incident waves.

• 통합자연과학논문집
• /
• 제7권1호
• /
• pp.1-4
• /
• 2014

Distributed Bragg reflector porous silicon of different characteristics were formed to determine their optical constants in the visible wavelength range using a periodic square wave current between low and high current densities. The surface and cross-sectional SEM images of distributed Bragg reflector porous silicon were obtained using a cold field emission scanning electron microscope. The surface image of distributed Bragg reflector porous silicon indicates that the distributions of pores are even. The cross-sectional image illustrates that the multilayer of distributed Bragg reflector porous silicon exhibits a depth of few microns and applying of square current density during the etching process results two distinct refractive indices in the contrast. Distributed Bragg reflector porous silicon exhibited a porosity depth profile that related directly to the current-time profile used in etch. Its free-standing film was obtained by applying an electro-polishing current.