• 한국지진공학회논문집
• /
• 제12권4호
• /
• pp.35-44
• /
• 2008

최근 새로운 지진하중 저항시스템으로 셀프센터링(SCED) 가새 시스템이 개발되었다. 진보된 가새 시스템인 비좌굴 가새(BRB) 시스템과는 달리 큰 지진이 발생한 후 구조물의 잔류 변형을 줄이거나 없앨 수 있는 셀프센터링 능력은 SCED 가새 시스템의 장점이다. 본 논문에서는 SCED 가새와 BRB 가새 시스템의 거동에 비틀림의 영향을 조사하기 위하여 세 가지 다른 편심을 가진 3차원 구조물의 응답을 비선형 동적해석을 수행하여 비교하였다. 해석결과에 따르면 층간변위의 높이방향의 변화는 비정형성에 관계없이 SCED 가새골조의 응답이 BRB 가새골조보다 일정하였으며, 잔류 층간변위와 잔류 회전 응답은 비정형성이 증가함에 따라 감소하였다. 중층 구조물에서 SCED 가새골조의 변형집중계수(DCF)는 BRB 가새골조보다 작은 것으로 나타났다. 이것은 SCED 가새골조가 건물 높이에 따라 보다 일정하게 변형함을 의미한다. DCF의 크기에 대한 비틀림 비정형의 효과는 작았다.

• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.863-882
• /
• 2016

This study aims to introduce a new bracing system by which even super-wide frames with large openings can be braced. The proposed system, hereafter called Cable-Pulley Brace (CPB), is a tension-only bracing system with a rectilinear configuration. In CPB, a wire rope passes through a rectilinear path around the opening(s) and connects the lower corner of the frame to its opposite upper one. CPB is a secondary load resisting system with a nonlinear-elastic hysteretic behavior due to its initial pre-tension load. As a result, the required energy dissipation would be provided by the MRF itself, and the main intention of using CPB is to contribute to the initial and post-yield stiffness of the whole system. Using a stiffness calibration technique, optimum placement of the CPBs is discussed to yield a uniform displacement demand along the height of the structure. A displacement-based design procedure is proposed by which the MRF with CPB can be designed to achieve a uniform distribution of inter-story drifts with predefined values. Obtained results indicated that CPB leads to significant reductions in maximum and residual deformations of the MRF at the expense of minor increase in the maximum base shear and developed axial force demands in the columns. In the case of a typical 5-story residential building, compared to SMRF system, CPB system reduces maximum amounts of inter-story and residual drifts by 35% and 70%, respectively. Moreover, openings of the frame are not interrupted by the CPB. This is the most appealing feature of the proposed bracing system from architectural point of view.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.745-757
• /
• 2018

The inclusion of a ductile steel bracing as means of repairing an earthquake-damaged bridge bent is evaluated and experimentally assessed for the purposes of restoring the damaged bent's strength and stiffness and further improving the energy dissipation capacity. The study is focused on substandard reinforced concrete multi-column bridge bents constructed in the 1950 to mid-1970 in the United States. These types of bents have numerous deficiencies making them susceptible to seismic damage. Large-scale experiments were used on a two-column reinforced concrete bent to impose considerable damage of the bent through increasing amplitude cyclic deformations. The damaged bent was then repaired by installing a ductile fuse steel brace in the form of a buckling-restrained brace in a diagonal configuration between the columns and using post-tensioned rods to strengthen the cap beam. The brace was secured to the bent using steel gusset plate brackets and post-installed adhesive anchors. The repaired bent was then subjected to increasing amplitude cyclic deformations to reassess the bent performance. A subassemblage test of a nominally identical steel brace was also conducted in an effort to quantify and isolate the ductile fuse behavior. The experimental data from these large-scale experiments were analyzed in terms of the hysteretic response, observed damage, internal member loads, as well as the overall stiffness and energy dissipation characteristics. The results of this study demonstrated the effectiveness of utilizing ductile steel bracing for restoring the bent and preventing further damage to the columns and cap beams while also improving the stiffness and energy dissipation characteristics.

• Advances in Computational Design
• /
• 제3권3호
• /
• pp.233-267
• /
• 2018

Conventional seismic design of concentrically braced frame (CBF) structures suggests that the gusset plate connecting a steel brace to beams and/or columns should be designed as non-dissipative in earthquakes, while the steel brace members should be designed as dissipative elements. These design intentions lead to thicker and larger gusset plates in design on one hand and a potentially under-rated contribution of gusset plates in design, on the other hand. In contrast, research has shown that compact and thinner gusset plates designed in accordance with the elliptical clearance method rather than the conventional standard linear clearance method can enhance system ductility and energy dissipation capacity in concentrically braced steel frames. In order to assess the two design methods, six cyclic push-over tests on full scale models of concentric braced steel frame structures were conducted. Furthermore, a 3D finite element (FE) shell model, incorporating state-of-the-art tools and techniques in numerical simulation, was developed that successfully replicates the response of gusset plate and bracing members under fully reversed cyclic axial loading. Direct measurements from strain gauges applied to the physical models were used primarily to validate FE models, while comparisons of hysteresis load-displacement loops from physical and numerical models were used to highlight the overall performance of the FE models. The study shows the two design methods attain structural response as per the design intentions; however, the elliptical clearance method has a superiority over the standard linear method as a fact of improving detailing of the gusset plates, enhancing resisting capacity and improving deformability of a CBF structure. Considerations were proposed for improvement of guidelines for detailing gusset plates and bracing members in CBF structures.

• 한국강구조학회 논문집
• /
• 제21권1호
• /
• pp.71-81
• /
• 2009

본 연구에서는 지진에 대해 보강 효과가 뛰어난 비좌굴 가새를 바탕으로 필로티를 가진 중저층 집합주택에 적합한 비좌굴 knee brace에 대해 총 5개의 실험체를 제작하여 실험을 실시하였다. 이는 공간활용이 우수하고 동선이나 시야를 방해하지 않으며, 시공 방법 또한 간단하여 필로티 층을 가진 중저층 건물에 대해 유리하다는 장점을 가지고 있다. 각 실험체의 변수로는 중심코어의 크기, 외부 보강재의 크기, 단부의 크기 및 형태로 정하였으며 실험결과 중심코어의 크기가 가장 큰 영향을 미치는 것으로 나타났다. 외부 보강재의 크기는 중심코어의 크기에 비해 효과는 미비하나, 파괴거동이나 연성도 측면에서는 영향을 미치는 것으로 나타났다. 실험을 통해 얻어진 힘-변위 그래프는 인장과 압축에서 비교적 안정적인 이력거동을 보였으며 AISC 2005 Seismic Provision 규정에서 제시한 연성도와 에너지 소산능력 측면에서도 충분한 효과를 발휘하였다. 또한 설계 층간 변위비의 2배까지 가력을 실시하였을 때, 가새의 전체 좌굴이나 국부적인 좌굴이 일어나지 않아야 한다는 조항을 만족하는 것으로 나타났다.

• Earthquakes and Structures
• /
• 제19권4호
• /
• pp.303-313
• /
• 2020

Spacious experimental and numerical investigation has been conducted by researchers to increase the ductility and energy dissipation of concentrically braced frames. One of the most widely used strategies for increasing ductility and energy dissiption, is the use of energy-absorbing systems. In this regard, the cyclic behavior of a chevron bracing frame system equipped with multi-pipe dampers (CBF-MPD) was investigated through finite element method. The purpose of this study was to evaluate and improve the behavior of the CBF using MPDs. Three-dimensional models of the chevron brace frame were developed via nonlinear finite element method using ABAQUS software. Finite element models included the chevron brace frame and the chevron brace frame equipped with multi-pipe dampers. The chevron brace frame model was selected as the base model for comparing and evaluating the effects of multi-tube dampers. Finite element models were then analyzed under cyclic loading and nonlinear static methods. Validation of the results of the finite element method was performed against the test results. In parametric studies, the influence of the diameter parameter to the thickness (D/t) ratio of the pipe dampers was investigated. The results indicated that the shear capacity of the pipe damper has a significant influence on determining the bracing behavior. Also, the results show that the corresponding displacement with the maximum force in the CBF-MPD compared to the CBF, increased by an average of 2.72 equal. Also, the proper choice for the dimensions of the pipe dampers increased the ductility and energy absorption of the chevron brace frame.

• 한국강구조학회 논문집
• /
• 제23권2호
• /
• pp.249-259
• /
• 2011

본 연구에서는 비틀림 하중을 받는 U형 강박스 거더의 뒤틀림 거동을 해석적으로 분석하여 거더 내부에 설치되는 수직브레이싱의 각 부재에 발생하는 부재력을 산정하는 수식이 개발되었다. 편심하중 또는 거더의 곡률에 의해 발생하는 비틀림하중을 박스단면내 상대적인 변형과는 무관한 순수 비틀림 성분력과 박스 단면내 뒤틀림을 유발하는 뒤틀림 성분력으로 분해하여 뒤틀림 성분력과 이에 저항하는 내부 수직브레이싱의 상호작용 효과를 분석함으로써 각 부재에 발생하는 부재력을 비틀림하중의 함수로 도출하였다. 제안식의 타당성을 검증하기 위하여 편심하중을 받는 단경간 직선거더 및 전경간 일정한 곡률을 가지는 3경간 거더 예제를 선정하여 3차원 유한요소 모델링을 수행하고 해석을 통해 얻은 내부 수직브레이싱의 각 부재력을 제안식으로 산정된 값과 비교 분석하였다. 해석 및 제안식으로 결정된 각각의 부재력은 높은 수준으로 일치함을 보였다.

• Physical Therapy Rehabilitation Science
• /
• 제3권2호
• /
• pp.93-100
• /
• 2014

Objective: The purpose of this study was to determine the effect of the abdominal bracing (AB) and abdominal bracing combined with ankle dorsiflexion (ABDF) on abdominal muscle thickness and strength in patients with chronic low back pain (LBP). Design: Two group pretest posttest design. Methods: Sixteen subjects were divided randomly into two group: ABDF group (n=8), and alone AB group (n=8). The ABDF group practiced AB exercise with additional ankle dorsiflexion. AB group practiced only AB exercises. Subjects in both groups received ABDF exercise and AB exercise for 40 min per day, three days per week during a period of three weeks, respectively. All the subjects were evaluated for abdominal muscle thickness and strength before and after intervention using ultrasonography and MedX machine. Results: The external oblique (EO), internal oblique, transverse abdominis (TrA) muscle thickness and the strength produced at $48^{\circ}$, $60^{\circ}$, $72^{\circ}$ showed a significant increase in the ABDF group after intervention, with a more significant improvement in EO and TrA muscle thickness in the ABDF group compared with the AB group (p<0.05). Also, the strength at $48^{\circ}$ strength showed a significant improvement in the ABDF group than the AB group (p<0.05). Conclusions: The study results showed that abdominal muscle contraction exercises with AD in patients with LBP had an influence on abdominal muscle thickness and strength. Therefore, these findings suggest that ABDF may be useful approach for enhancement of abdominal muscle thickness and strength in patients with chronic low back pain.

• 디지털융복합연구
• /
• 제17권3호
• /
• pp.205-213
• /
• 2019

건설현장의 굴토작업과 흙막이 가시설은 서로 밀접한 관계를 가지고 있다. 협소한 공간에서 가장 효율적으로 지하구조물을 축조하고 굴토작업시 외측 배면의 토사 이완을 방지하고 지하수위를 유지하기 위한 방안으로 안전성이 확보된 흙막이 가시설 설치는 반드시 필요하다. 본 연구는 기존 지하층 굴토공사에서 흙의 유실을 방지하기 위해 설치하는 가설흙막이를 종래에는 가설벽체를 형성하고 어스앵커, 래커, 스트러트 등을 이용하여 내부 지보를 하고 굴토공사를 시행하던 방식에서, RSB공법은 기존 재래식공법의 문제점을 개선하여, 내부 지보재를 제거하고 2열 엄지말뚝과 브레이싱을 이용하여 자립으로 토압에 저항하도록 하여 지반굴착을 진행하는 공법이다. 본 연구에서는 RSB공법 현장시범적용과 계측결과를 통하여 굴착방법에 따른 흙막이 가시설의 공법 적용성, 평가결과 발생변위가 모두 계측 허용치 만족하고. 기존 재래식공법에 비해 시공성과 경제성이 향상되었다.

• 대한통합의학회지
• /
• 제7권2호
• /
• pp.121-131
• /
• 2019

Purpose : Lower back pain is a common disorder experienced by approximately 90-% of the population at least once in a lifetime. This study examines changes in the thicknesses and ratios of the deep and superficial fibers of the multifidus according to the lumbar stabilization exercise used for spinal stabilization. Methods : Ten different lumbar stabilization exercises were implemented by 20 healthy men in random order, and the thickness of multifidus muscle was measured ultrasound image during each exercise. Results : The surface muscle fibers of the multifidus muscles significantly increased in the exercise method in which the arms and legs were lifted (p<.05), while the deep muscle fibers of the multifidus muscles increased significantly in the exercise in which the arms and legs were not lifted (p<.05). The ratio of the thickness of surface muscle fibers to the total thickness of muscle fibers was higher in the exercise method in which the arms and legs were lifted (p<.05), while the ratio of the thickness of deep muscle fibers to the total thickness of muscle fibers was higher in the hollowing and bracing exercise method in which the arms and legs were not lifted (p<.05). Conclusion : When lumbar stabilization exercise should be performed at clinics to strengthen the deep muscle fibers of the multifidus muscles that have larger effects on the stability of spinal segments, taking the stability of the spine into consideration indicates that, hollowing and bracing exercise methods that do not that cause isotonic extension to the spine are appropriate.