• 제목/요약/키워드: Brace

검색결과 441건 처리시간 0.025초

복합하중을 고려한 교체 가능한 강재 브레이스 시스템의 내진성능 (Seismic Performance of Replaceable Steel Brace System Subjected to Combined Loadings)

  • 노경민;김윤성;김민숙;이영학
    • 한국공간구조학회논문집
    • /
    • 제23권4호
    • /
    • pp.43-50
    • /
    • 2023
  • This study aims to assess the seismic performance of retrofitted reinforced concrete columns using a Replaceable Steel Brace (RSB) system, subjected to combined axial, lateral, and torsional loadings. Through experimental testing, one non-retrofitted concrete column specimen and two retrofitted specimens with variable sliding slot lengths were subjected to eccentric lateral loads to simulate realistic seismic loading. The retrofitted specimens with RSBs exhibited enhanced resistance against shear cracking, effective torsional resistance, and demonstrated the feasibility of easy replacement. The RSB system substantially improved seismic performance, achieving approximately 1.7 times higher load capacity and 3.5 times greater energy dissipation compared to non-retrofitted column, thus validating its efficacy under combined loading conditions.

브레이스트 아치 리브의 면내 좌굴 및 극한강도 평가 (Evaluation of In-plane Buckling and Ultimate Strength for Braced Arch Ribs)

  • 박용명;허택영;이필구;노경배
    • 한국강구조학회 논문집
    • /
    • 제16권6호통권73호
    • /
    • pp.759-768
    • /
    • 2004
  • 본 연구에서는 원형 강관을 수직 브레이스로 연결한 아치 리브의 면내 좌굴강도 및 극한강도를 평가하기 위한 매개변수 해석 연구를 수행하였다. 브레이스트 아치 리브의 탄소성 거동은 하중의 재하 상태와 아치 곡률뿐만 아니라 일반 단일 아치 리브와 달리 강관리브와 브레이스 부재의 휨강성비, 브레이스의 배치 간격, 강관 리브의 배치간격 등에 영향을 받게 된다. 이러한 영향을 분석하기 위해 본 해석에서는 라이즈비, 리브와 브레이스의 단면2차모멘트비, 수직브레이스의 간격비, 지간 대비 상 하 리브의 간격비, 초기 제작오차 및 세장비 등을 매개변수로 하고 하중의 재하 상태는 등분포 고정하중에 대한 활하중의 비를 고려하였다. 이러한 매개변수에 대한 해석 결과로부터 브레이스트 아치 리브의 적정 형상을 제안하였다. 또한, 브레이스트 아치 리브의 극한강도 평가를 위한 대형 구조 실험을 수행하였으며, 실험 결과는 해석에 의한 결과와 비교적 일치하였다.

철골 끼움가새골조로 보강된 학교건물의 내진성능평가를 위한 비선형 해석 모델에 관한 연구 (Study on the Nonlinear Analysis Model for Seismic Performance Evaluation of School Buildings Retrofitted with Infilled Steel Frame with Brace)

  • 유석형;고관욱
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권4호
    • /
    • pp.65-72
    • /
    • 2022
  • 최근 국내 지진으로 인한 건축물의 피해는 주로 학교건물과 필로티형 다가구 주택에서 발생함으로써 동일한 형식의 건물에 대한 내진보강 필요성을 부각시켰다. 학교시설 내진보강사업은 초기에 연성보강방법으로서 댐퍼를 활용한 다양한 특허공법들이 충분한 검증 절차 없이 적용되었다. 그러나 「학교시설 내진성능평가 및 보강 매뉴얼, 2021」에서는 특허공법 적용시 별도의 엄격한 검증절차를 통하여 적용토록 하고 대신 일반공법으로서 강도/강성보강공법의 활성화를 유도하였다. 학교건물의 강도/강성 보강공법으로서 활발히 적용되고 있는 철골 끼움가새골조보강을 위한 내진선능평가 시 실무에서는 일부 제한된 조건에서 안전측의 내진성능평가 결과를 도출할 것으로 판단하여 기존 RC 부재에 철골가새만을 직접연결하여 해석모델을 구성하고 있다. 그러나 철골 끼움가새골조의 해석모델에서 프레임을 제거할 경우 강성감소로 인한 보강 부근의 기존 RC부재에 발생하는 하중감소는 매우 클 것으로 사료되며 이는 보강부위 기초보강 유무 검토에도 영향을 미칠 것으로 판단된다. 따라서 본 연구에서는 철골 끼움가새골조를 이용하여 저층 RC 학교건물 내진보강 시 성능평가를 위한 해석모델에 대하여 철골 프레임 고려 유무, 프레임 링크방식 등을 변수로 한 예비해석과 실제 3층 학교 건물에 대한 비선형 정적해석에 따른 내진성능평가 를 수행하였으며, 변수별 예비해석 및 푸쉬오버 해석결과를 비교함으로써 합리적인 해석모델 설정을 위한 기초자료를 제시하였다.

4방향흔들림방지버팀대의 구조 안정성 및 내진 성능 연구 (Study of Structural Stability and Seismic Performances of 4-Way Sway Prevention Brace)

  • 오수언;이항준;좌성훈
    • 한국재난정보학회 논문집
    • /
    • 제18권3호
    • /
    • pp.646-659
    • /
    • 2022
  • 연구목적: 본 연구에서는 기존 소방 시설에 사용되고 있는 흔들림방지버팀대에 비하여 설치 면적을 효율적으로 감소시키고, 안정성과 내진 성능이 우수한 4방향 흔들림방지버팀대를 개발하였다. 개발된 4방향 흔들림방지버팀대의 성능 및 신뢰성을 인장 및 압축 시험과 내진 시험을 통하여 검증하였다. 연구방법: KFI 인증 기준에 따라 정적시험으로서 수평 및 수직 배관에 4방향 흔들림방지버팀태을 설치하여 인장 및 압축 시험을 수행하였으며, 정격 하중에 최대 움직임을 측정하였다. 또한 동적시험으로서 물이 채워진 배관에 4방향 흔들림방지버팀태를 설치하고 가속도센서를 통하여 입력 가진파에 대한 시험응답스펙트럼을 측정하였다. 또한 내진 시험 후 배관 및 흔들림방지버팀대의 이탈, 파손 및 국부변형을 관찰하였다. 연구결과: 인장 및 압축 실험을 수행한 결과, 인장 및 압축 시에 배관의 최대 움직임은 규정 기준 대비 50%~70% 이하로서 4방향 흔들림방지버팀태의 성능이 매우 우수함을 알 수 있었다. 4방향 흔들림방지버팀태의 내진 시험결과, 시험응답스펙트럼이 요구응답스펙트럼을 포괄하고 있음을 알 수 있었다. 시험 종료 후에 배관 및 흔들림방지버팀대의 이탈이나 파손 및 국부변형 등은 발생하지 않았으며, 시설물의 구조적 안정성이 유지됨을 확인할 수 있었다. 결론: 본 연구에서는 정적 실험 및 동적 실험을 통하여, 개발된 4방향 흔들림방지버팀대가 KFI 인중 기준을 만족하고 있음을 알 수 있었고, 기존 흔들림방지버팀대에 비하여 효율성과 경제성 및 안정성과 내진 성능이 우수함을 확인할 수 있었다.

능력스펙트럼을 이용한 가새형 소성 감쇠기의 설계 (Design of Unbend Braces Using Capacity Spectrum Method)

  • 최현훈;김유정;김진구
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
    • /
    • pp.260-267
    • /
    • 2001
  • In this study straightforward design procedure for unbond brace hysteretic dampers is developed. The required amount of equivalent damping to satisfy given performance acceptance criteria is obtained conveniently based on the capacity spectrum method without carrying out time-consuming nonlinear dynamic time history analysis. Then the size of the unbend braces is determined from the required equivalent damping. Parametric study is performed for the design variables such as natural period, yield strength, the stiffness after the first yield, yield stress of the unbond brace.

  • PDF

수추측만증에 관한 고찰

  • 오경환
    • 대한물리치료사협회지
    • /
    • 통권3호
    • /
    • pp.39-45
    • /
    • 1981
  • A Study on Scoliosis Milwaukee Brace , Therapeutic Exercise -Oh, Kuyung- Hwan Scoliosis implies an appreciable lateral deviation in the spine. There are numerous theories of the etiology of scolisosis. but the true causative factors remain unknown ;thus this affliction currently cannot be prevented. Treatment essentially consists of early recognition, correction of existing curves, and prevention of the further progression of the curves . Tremendous strides are being made in the treatment of severe scoliosis but the desire for early nonoperative treatment is of paramount important. Many conservative nonoperative procedures have been advocated. Among th-em .Milwaukee brace and therapeutic exercise are the most effective ones .

  • PDF

가새형 소성변형감쇠기의 설계 방법에 관한 연구 (Design of Energy Absorbing Braces)

  • 김진구;이강준
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2000년도 가을 학술발표회논문집
    • /
    • pp.265-272
    • /
    • 2000
  • Unbond brace hysteretic dampers are generally used to prevent or decrease structural damage in buildings subjected to strong earthquake by its energy dissipating hysteretic behavior. According to a previous research, the optimum ratio of device yield strength to story yield strength of the combined system has been identified as the most important parameter for characterizing the performance of this device. In this research, the validity and the applicability of the previous research has been investigated and a new approach has been proposed through earthquake response analysis of a steel structure installed with unbond brace type hysteretic damper.

  • PDF

Seismic behavior of composite walls with encased steel truss

  • Wu, Yun-tian;Kang, Dao-yang;Su, Yi-ting;Yang, Yeong-bin
    • Steel and Composite Structures
    • /
    • 제22권2호
    • /
    • pp.449-472
    • /
    • 2016
  • This paper studies the seismic behavior of reinforced concrete (RC) walls with encased cold-formed and thin-walled (CFTW) steel truss, which can be used as an alternative to the conventional RC walls or steel reinforced concrete (SRC) composite walls for high-rise buildings in high seismic regions. Seven one-fourth scaled RC wall specimens with encased CFTW steel truss were designed, manufactured and tested to failure under reversed cyclic lateral load and constant axial load. The test parameters were the axial load ratio, configuration and volumetric steel ratio of encased web brace. The behaviors of the test specimens, including damage formation, failure mode, hysteretic curves, stiffness degradation, ductility and energy dissipation, were examined. Test results indicate that the encased web braces can effectively improve the ductility and energy dissipation capacity of RC walls. The steel angles are more suitable to be used as the web brace than the latticed batten plates in enhancing the ductility and energy dissipation. Higher axial load ratio is beneficial to lateral load capacity, but can result in reduced ductility and energy dissipation capacity. A volumetric ratio about 0.25% of encased web brace is believed cost-effective in ensuring satisfactory seismic performance of RC walls. The axial load ratio should not exceed the maximum level, about 0.20 for the nominal value or about 0.50 for the design value. Numerical analyses were performed to predict the backbone curves of the specimens and calculation formula from the Chinese Code for Design of Composite Structures was used to predict the maximum lateral load capacity. The comparison shows good agreement between the test and predicted results.

Brace Compression for Treatment of Pectus Carinatum

  • Jung, Joonho;Chung, Sang Ho;Cho, Jin Kyoung;Park, Soo-Jin;Choi, Ho;Lee, Sungsoo
    • Journal of Chest Surgery
    • /
    • 제45권6호
    • /
    • pp.396-400
    • /
    • 2012
  • Background: Surgery has been the classical treatment of pectus carinatum (PC), though compressive orthotic braces have shown successful results in recent years. We propose a non-operative approach using a lightweight, patient-controlled dynamic chest-bracing device. Materials and Methods: Eighteen patients with PC were treated between July 2008 and June 2009. The treatment involved fitting of the brace, which was worn for at least 20 hours per day for 6 months. Their degree of satisfaction (1, no correction; 4, remarkable correction) was measured at 12 months after the initiation of the treatment. Results: Thirteen (72.2%) patients completed the treatment (mean time, $4.9{\pm}1.4$ months). In patients who completed the treatment, the mean overall satisfaction score was $3.73{\pm}0.39$. The mean satisfaction score was 4, and there was no recurrence of pectus carinatum in patients who underwent the treatment for at least 6 months. Minimal recurrence of pectus carinatum after removal of the compressive brace occurred in 5 (38.5%) patients who stopped wearing the compressive brace at 4 months. Conclusion: Compressive bracing results in a significant improvement in PC appearance in patients with an immature skeleton. However, patient compliance and diligent follow-up appear to be paramount for the success of this method of treatment. We currently offer this approach as a first-line treatment for PC.