• Journal of the Korea Convergence Society
• /
• v.12 no.3
• /
• pp.281-286
• /
• 2021

This study aims to compare chest mobility, diaphragm contraction, and lung capacity when wearing a bra and per breast size. The subjects of this study included 10 adult women who were attending Chungnam B University: 5 women who wear underwear size 75A (group A) and 5 who wear underwear size 85B (group B). The chest mobility using a tape measure, the diaphragm contraction using ultrasound, and the lung capacity was measured using a Pony FX before and after bra wear. The chest mobility and diaphragm contraction were significantly reduced when bras were worn in group A and B. Lung capacity was significantly decreased only in group A. There was no significant difference between the groups. This study suggests that women's bras can have a negative effect on diaphragm movement, chest mobility, and lung capacity.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.41-41
• /
• 2015

BSA-seq technologies, combined Bulked Segregant Analysis (BSA) and Next-Generation Sequencing (NGS), are making it faster and more efficient to establish the association of agronomic traits with molecular markers or candidate genes, which is the requirement for marker-assisted selection in molecular breeding. Clubroot disease, caused by Plasmodiophora brassicae, is a serious threat to Brassica crops. Even we have breed new clubroot resistant varieties of Chinese cabbage (B. rapa ssp. pekinesis), the underlying genetic mechanism is unclear. In this study, an $F_2$ population of 340 plants were inoculated with P. brassicae from Xinye (Pathotype 2 on the differentials of Williams). Resistance phenotype segregation ratio for the populations fit a 3:1 (R:S) segregation model, consistent with a single dominant gene model. Super-BSA, using re-sequencing the parents, extremely R and S DNA pools with each 50 plants, revealed 3 potential candidate regions on the chromosome A03, with the most significant region falling between 24.30 Mb and 24.75 Mb. A linkage map with 31 markers in this region was constructed with several closely linked markers identified. A Major QTL for clubroot resistance, CRq, which was identified with the peak LOD score at 169.3, explaining 89.9% of the phenotypic variation. And we developed a new co-segregated InDel marker BrQ-2. Joint BSA-seq and traditional QTL analysis delimited CRq to an 250 kb genomic region, where four TIR-NBS-LRR genes (Bra019409, Bra019410, Bra019412 and Bra019413) clustered. The CR gene CRq and closely linked markers will be highly useful for breeding new resistant Chinese cabbage cultivars.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.226-237
• /
• 2004

Purpose: Four finite element models were constructed in the mandible having a single implant fixture connected to the first premolar-shaped superstructure, in order to evaluate how the shape of the fixture and the implant-abutment connection would influence the stress level of the supporting tissues fixtures, and prosthethic components. Material and methods : The superstructures were constructed using UCLA type abutment, ADA type III gold alloy was used to fabricate a crown and then connected to the fixture with an abutment screw. The models BRA, END , FRI, ITI were constructed from the mandible implanted with Branemark, Endopore, Frialit-2, I.T.I. systems respectively. In each model, 150 N of vertical load was placed on the central pit of an occlusal plane and 150 N of $40^{\circ}$ oblique load was placed on the buccal cusp. The displacement and stress distribution in the supporting tissues and the other components were analysed using a 2-dimensional finite element analysis . The maximum stress in each reference area was compared. Results : 1. Under $40^{\circ}$ oblique loading, the maximum stress was larger in the implant, superstructure and supporting tissue, compared to the stress pattern under vertical loading. 2. In the implant, prosthesis and supporting tissue, the maximum stress was smaller with the internal connection type (FRI) and the morse taper type (ITI) when compared to that of the external connection type (BRA & END). 3. In the superstructure and implant/abutment interface, the maximum stress was smaller with the internal connection type (FRI) and the morse taper type (ITI) when compared to that of the external connection type (BRA & END). 4. In the implant fixture, the maximum stress was smaller with the internal connection type (FRI) and the morse taper type (ITI) when compared to that of the external connection type (BRA & END). 5 The stress was more evenly distributed in the bone/implant interface through the FRI of trapezoidal step design. Especially Under $40^{\circ}$ oblique loading, The maximum stress was smallest in the bone/implant interface. 6. In the implant and superstructure and supporting tissue, the maximum stress occured at the crown loading point through the ITI. Conclusion: The stress distribution of the supporting tissue was affected by shape of a fixture and implant-abutment connection. The magnitude of maximum stress was reduced with the internal connection type (FRI) and the morse taper type (ITI) in the implant, prosthesis and supporting tissue. Trapezoidal step design of FRI showed evenly distributed the stress at the bone/implant interface.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.6
• /
• pp.880-889
• /
• 2021

The home meal replacement (HMR) market has attracted significant attention due to COVID-19 pandemic and products that utilize the combination of different processed ingredients are now being developed. In this study, Broughton's ribbed ark Scapharca broughtonii was soaked in seasoned soy sauce with the incorporation of mustard leaf Brassica juncea (M-BRA), which is known to have a unique texture as well as excellent functional properties such as antioxidation, to develop a regional specialty product. The optimal conditions for manufacturing M-BRA from the seasoned soy sauce (the sauce to be added [X₁] and the soaking time [X₂]), were examined using response surface methodology (RSM) to analyze the significance of the salinity (Y₁), amino-N content (Y₂), and overall acceptance (Y₃). The coefficient of determination (R²) between X₁-X₂ and Y₁-Y₃ were close to 1, thereby confirming the suitability of the RSM model. The optimal conditions were seasoned soy sauce addition of 140% and soaking time of 156 min. The M-BRA manufactured under these conditions exhibited superior overall acceptance compared to seasoned commercial soy sauce, which was used as a control. We expect that the market for M-BRA manufactured by combining marine and agricultural materials will expand owing to superior overall acceptance compared with commercial products.

• The International Journal of Costume Culture
• /
• v.12 no.2
• /
• pp.197-201
• /
• 2009

The meaning of brassieres much more than a piece of underwear for women because breasts are considered the symbol of feminine sexuality, througout the history, women have used various intimate apparel or device to shape their body. In this article, have highlighted the relationships between fashion and technology, attractiveness, identity and, all of which are important components of aspects and evaluation of bra.

• Women's Health Nursing
• /
• v.18 no.1
• /
• pp.49-61
• /
• 2012

Purpose: The purpose of this study was to examine the experiences of the use of external breast prostheses among breast cancer survivors in Korea. Methods: A qualitative descriptive study was conducted, using focus groups. Data were collected from breast cancer survivors who were patients of C women's hospital in Seoul, Korea. Data were analyzed using content analysis in order to identify significant themes. Results: Participants included forty breast cancer survivors who had mastectomy as a surgical treatment. Four themes emerged from the collected data were: 1) concern over the high price of external breast prosthesis, 2) irregular use of external breast prosthesis, 3) unsatisfied with mastectomy bra, and 4) wanting to hide or not to talk about using breast prosthesis openly. Conclusion: Since most participants reported irregular use and negative experiences related to external breast prosthesis or mastectomy bra use, healthcare workers should allow more time for proper fitting and counseling and consulting with breast cancer survivors. In addition, health care providers as well as family and friends should keep in mind that cancer survivors need support that can help them cope by using positive reframing. Furthermore, improvements in the coverage of costs and services are needed for these women. This would be helpful for breast prosthesis users.

• Journal of Periodontal and Implant Science
• /
• v.26 no.3
• /
• pp.725-734
• /
• 1996

The present study has been performed to revise the forms of early-onset periodontitis(EOP) into the homogeneous phenotypic subsets by cluster analysis using sets of clinical parameters. Retrospective radiographic interproximal alveolar bone levels were measured from cemento-enamel junctions on patients who have previously been diagnosed as having one of EOP during last 5 years. Mean interproximal bone levels(BL) and mesial bone level(Ratio) of 1st molars relative to mean interproximal bone levels of adjacent teeth(lst and 2nd premolars and canines)were calculated on each patient. Using parameters BL and Ratio(BR group) or BL, Ratio and age(BRA group), cluster analysis was performed to revise EOP patients into homogeneous subsets. At least three or four cluster could be homogeneously formed both in BR or BRA groups with statistically significant differences in parameters used among clusters as evidenced by MANOVA test. It was shown that the greater the BL, the smaller the Ratio was. It was also evident that mean interproximal bone levels were lowest aroud 1st molars and/or incisors regardless of cluster types. The results has provided cluster-based studies for identifying laboratory markers responsible for the development of EOP subsets.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.3 s.9
• /
• pp.40-44
• /
• 2006

This study is on the brassiere of reduce clothing pressure. To set the measurements of bras for women in their 20s, considering the comfortableness in wearing and tightness, this paper conducted a questionnaire survey concerning breasts and bras as well as measurements of body and contact surface pressure. As a result of comparing the discrepancies between the lower chest circumferences of the body and the bra, it was revealed that 67.0% were wearing one that was bigger than the body size. Most of them mentioned 'feeling of tightness' as a reason(60.4%), which suggests there are problems of the total length and elasticity in the process of making bras. The favorite bra types are wire type(57.9%), mold type(24.3%), and strapless type(10.4%).it is recommended that the total length of lower chest circumference be increased. The result and the recommendations of this study are as follows: First, the total length of brassiere be increased by 5cm from the current patterns in the process of manufacturing. Second, elasticity of the lower-side tapes be extended from 120% to 170%.

• Journal of the Korean Society of Costume
• /
• v.58 no.4
• /
• pp.99-112
• /
• 2008

The aim of the study was to look into the construction methods of historical corsetry and compare them with the construction methods of corsetry today. Through a comparative study, it was concluded that the design, material, sewing and functions of corsetry of a certain period are sum of the clothing techniques and fashion of the time. Corset was first appeared at the end of the 16th century. It has been through many changes in terms of items, materials, patterns, sewing methods in order to make right silhouettes of the time. Now corsetry has been developed into various items such as waist nipper, all-in-one, nipper bra, and girdle. All these items have a common purpose, that is to improve the body shape. The corsetry of the past was made of non stretchable materials, so they used to restrict body movements, and required individual fitting several times. Due to the development of thin durable stretchable fabrics, functional bones, and advanced sewing machines, construction methods of seam, hem and opening are simplified compare to their predecessors. Consequently corsetry became less weighted, easy to wear, easy to wash and easy to mass produce. Yet they have consistency in sewing techniques such as using bones or wires to support bodice shape, using durable twill fabrics over plain for attractive body shapes.

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.81-92
• /
• 2008

The purpose of this study is to develop the applied brassiere pattern of women which are fitting for 75A. The constructing of this experimental brassiere were lower cup, upper cup, front panel and U-wing as well as a full cup embcing the entire breasts. Basing on the bra model from domestic experiment results, development of an applied design, round side type pattern, has been suggested. Thus, suggesting the round variation design bra, which is an applied design based on the basic model based on the breast volume. Based on the sizes that are in reference to Size Korea (2004) and related previous researches, the basic model that has been experimented with 11.4% polyurethane and 88.6% Nylon as the materials, has been selected as the model of research. This takes 75A, the size of which is set according to the underbust circumference and the breasts circumference, as the basic model. It is an application in terms of design, and there is no change to the cup volume or size because it has been moved only from the cutting line. The applied design changes the right side of the lower cup into an easily-movable form and attaches it to the upper cup, and the lower cup takes the right part of the upper cup to form a cup shape of round variation design. It also changes basic straight form of the wings, and alters them into U-shape.