• Title/Summary/Keyword: Bps

Search Result 373, Processing Time 0.028 seconds

Implementation of a FLEX Protocol Signal Processor for High Speed Paging System (고속 페이징 시스템을 위한 FLEX 프로토콜 신호처리기의 구현)

  • Gang, Min-Seop;Lee, Tae-Eung
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.38 no.1
    • /
    • pp.69-78
    • /
    • 2001
  • This paper presents the design and FPGA implementation of a FLEX PSP(Protocol Signal Processor) for the portable high speed paging system. In this approach, two algorithms are newly proposed for implementing the PSP which provides capabilities of the maximum 6,400bps at speed, high-channel throughput, real time error correction and an effective frame search function. One is an accurate symbol synchronization algorithm which is applied for synchronizing the interleaved 4-level bit symbols which are received at input stage of A/D converter, and the other is a modified fast decoding algorithm which is provided for realizing double error correction of (31,21)BCH signal. The PSP is composed of six functional modules, and each module is modelled in VHDL(VHSIC Hardware Description Language). Both functional simulation and logic synthesis have performed for the proposed PSP through the use of Synopsys$^{TM}$ tools on a Axil-320 Workstation, and where Altera 10K libraries are used for logic synthesis. From logic synthesis, we can see that the number of gates is about 2,631. For FPGA implementation, timing simulation is performed by using Altera MAX+ PLUS II, and its results will be also given. The PSP which is implemented in 6 FPGA devices on a PCB has been verified by means of Logic Analyzer.r.

  • PDF

Well-Structured Inter-Oranizational Workflow Modeling for B2B e-Commerce

  • Li, Xizuo;Kim, Sun-Ho
    • The Journal of Society for e-Business Studies
    • /
    • v.9 no.4
    • /
    • pp.53-64
    • /
    • 2004
  • Today's enterprises take processes beyond their own organizational boundaries in order to electronically trade goods and services with partners under the concept of B2B e-commerce. In this environment, inter-organizational business processes are required and should be well defined not only in public processes between partners but in private processes within individual partners. For this purpose, we propose the method to represent inter-organizational business processes. First of all, a feasible modeling method for the inter-organizational workflow for B2B e-commerce is developed. This method is proposed based on BPSS in ebXML so that the binary and multiparty collaborations share a common process. In this method, message flows and control flows are separated in order to facilitate the design procedure of the inter-organizational workflow process. Second, a well-structured process modeling algorithm to design a well-structured inter-organizational workflow process is proposed. In the algorithm, a process is transformed to a Petri-net-based process model. This algorithm employs well-behaved modeling blocks, well-behaved control structures, and business transactions to develop well-structured process models by a top-down design.

  • PDF

A Design of Variable Rate Clock and Data Recovery Circuit for Biomedical Silicon Bead (생체 의학 정보 수집이 가능한 실리콘 비드용 가변적인 속도 클록 데이터 복원 회로 설계)

  • Cho, Sung-Hun;Lee, Dong-Soo;Park, Hyung-Gu;Lee, Kang-Yoon
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.20 no.4
    • /
    • pp.39-45
    • /
    • 2015
  • In this paper, variable rate CDR(Clock and Data Recovery) circuit adopting blind oversampling architecture is presented. The clock recovery circuit is implemented by using wide range voltage controlled oscillator and band selection method and the data recovery circuit is designed to digital circuit used majority voting method in order to low power and small area. The designed low power variable clock and data recovery is implemented by wide range voltage controlled oscillator and digital data recovery circuit. The designed variable rate CDR is operated from 10 bps to 2 Mbps. The total power consumption is about 4.4mW at 1MHz clock. The supply voltage is 1.2V. The designed die area is $120{\mu}m{\times}75{\mu}m$ and this circuit is fabricated in $0.13{\mu}m$ CMOS process.

Molecular Biological Characteristics of Vibrio cholerae O1 Isolated from Diarrheal patients in the Gyeongbuk province. (최근 경북지역 설사환자 검체에서 분리된 Vibrio cholerae O1의 분자생물학적 특성)

  • 이상조;이복권;이건주;이희무
    • Microbiology and Biotechnology Letters
    • /
    • v.31 no.4
    • /
    • pp.334-341
    • /
    • 2003
  • This study was carried out to investigate the cause of cholera outbreak in Gyeongbuk province in 2001.90 strains of Vibrio cholerae O1 El Tor serotype Inaba were isolated from diarrheal patients. By multiplex-PCR, all of the isolated strains revealed positive for detection ctxA, hlyA and tcpA genes. There were DNA sequence difference of the cholera-toxin subunit A gene and subunit B gene between isolated V. cholerae O1 and the strain of GenBank. In analysis of PFGE patterns, all of the isolated strains were showed the same DNA fragments. We also collected plankton samples in the east coast of Gyeongbuk to isolate V. cholerae O1 and V. cholerae O139 from August to October 2002. The samples were examined to detect the rfb gene and cholera-toxin gene by multiplex-PCR. The cholera-toxin gene was detected and then we tried to isolate V. cholerae O1 and V. cholerae O139, but they were not isolated.

Performance Evaluation of a New Helper Node Selection Scheme for Cooperative Communications (협력통신용 신규 도움노드 선정기법 설계 및 성능평가)

  • Jang, Jaeshin
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.8
    • /
    • pp.1811-1819
    • /
    • 2013
  • In this paper, we carried out a study on how to find an appropriate helper node for cooperative communications, the role of which is very import to enhance system throughput of wireless communication system. The busy tone cooperative MAC (BT-COMAC) protocol proposed in this paper is a new cooperative MAC protocol with a reactive helper node scheme and maximizes the benefits of existing schemes while making up for their shortcomings. We conducted performance evaluation of this new protocol using computer simulation experiment. System throughput in bps and channel access delay are utilized as performance measures. We used a random way point mobility model where every communication node moves independently one another, and slow fading channel where every communication node decided its transmission rate with received power basis. Numerical results show that the new MAC protocol enhances system throughput as much as 15% of the existing scheme.

A Study on Energy Savings in a Network Interface Card Based on Optimization of Interrupt Coalescing (인터럽트 병합 최적화를 통한 네트워크 장치 에너지 절감 방법 연구)

  • Lee, Jaeyoul;Han, Jaeil;Kim, Young Man
    • Journal of Information Technology Services
    • /
    • v.14 no.3
    • /
    • pp.183-196
    • /
    • 2015
  • The concept of energy-efficient networking has begun to spread in the past few years, gaining increasing popularity. A common opinion among networking researchers is that the sole introduction of low consumption silicon technologies may not be enough to effectively curb energy requirements. Thus, for disruptively boosting the network energy efficiency, these hardware enhancements must be integrated with ad-hoc mechanisms that explicitly manage energy saving, by exploiting network-specific features. The IEEE 802.3az Energy Efficient Ethernet (EEE) standard is one of such efforts. EEE introduces a low power mode for the most common Ethernet physical layer standards and is expected to provide large energy savings. However, it has been shown that EEE may not achieve good energy efficiency because mode transition overheads can be significant, leading to almost full energy consumption even at low utilization levels. Coalescing techniques such as packet coalescing and interrupt coalescing were proposed to improve energy efficiency of EEE, but their implementations typically adopt a simple policy that employs a few fixed values for coalescing parameters, thus it is difficult to achieve optimal energy efficiency. The paper proposes adaptive interrupt coalescing (AIC) that adopts an optimal policy that could not only improve energy efficiency but support performance. AIC has been implemented at the sender side with the Intel 82579 network interface card (NIC) and e1000e Linux device driver. The experiments were performed at 100 M bps transfer rate and show that energy efficiency of AIC is improved in most cases despite performance consideration and in the best case can be improved up to 37% compared to that of conventional interrupt coalescing techniques.

High Efficiency Switch-Mode LED driver for Visible Light Communication System (가시광 통신 시스템을 위한 고효율 스위치모드 LED 구동회로)

  • Kang, Jung-Min;Cho, Sang-Ho;Hong, Sung-Soo;Han, Sang-Kyoo;SaKong, Suk-Chin
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.16 no.4
    • /
    • pp.358-365
    • /
    • 2011
  • Recently, the LED(Light Emitting Diode) replacing incandescent light bulbs and fluorescent light has great attentions as a most promising candidate for the next generation lighting source due to its environment-friendly characteristics, long life and excellent efficiency. Moreover, since it is a semiconductor device which can convert the electric energy to visible light at a very high speed, it can also used as a communication device. Therefore, the VLC(Visible Light Communication) using the LED can perform the near field communication and lighting function at the same time without additional expenses. However, since the switching device of the conventional LED driver for VLC is operated in the linear region, there exist several drawbacks such as a poor power conversion efficiency and serious heat generation. On the other hand, since the proposed driver is operated in the on/off switching region, it features a higher efficiency and more improved heat generation. To verify the validity of the proposed LED driver, experimental results from a prototype of 20W rated LED driver applied to 3MHz bps broadcasting audio system are given.

Multiplex-Touchdown PCR to Simultaneously Detect Cryptosporidium parvum, Giardia lamblia, and Cyclospora cayetanensis, the Major Causes of Traveler's Diarrhea

  • Shin, Ji-Hun;Lee, Sang-Eun;Kim, Tong Soo;Ma, Da-Won;Chai, Jong-Yil;Shin, Eun-Hee
    • Parasites, Hosts and Diseases
    • /
    • v.54 no.5
    • /
    • pp.631-636
    • /
    • 2016
  • This study aimed to develop a multiplex-touchdown PCR method to simultaneously detect 3 species of protozoan parasites, i.e., Cryptosporidium parvum, Giardia lamblia, and Cyclospora cayetanensis, the major causes of traveler's diarrhea and are resistant to standard antimicrobial treatments. The target genes included the Cryptosporidium oocyst wall protein for C. parvum, Glutamate dehydrogenase for G. lamblia, and 18S ribosomal RNA (18S rRNA) for C. cayetanensis. The sizes of the amplified fragments were 555, 188, and 400 bps, respectively. The multiplex-touchdown PCR protocol using a primer mixture simultaneously detected protozoa in human stools, and the amplified gene was detected in > $1{\times}10^3$ oocysts for C. parvum, > $1{\times}10^4$ cysts for G. lamblia, and > 1 copy of the 18S rRNA gene for C. cayetanensis. Taken together, our protocol convincingly demonstrated the ability to simultaneously detect C. parvum, G. lamblia, and C. cayetanenesis in stool samples.

Lateral arthroplasty along with buccal fat pad inter-positioning in the management of Sawhney type III temporomandibular joint ankylosis

  • Malhotra, Vijay Laxmy;Singh, Virendra;Rao, JK Dayashankara;Yadav, Sunil;Gupta, Pranav;Shyam, Radhey;Kirti, Shruti
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.45 no.3
    • /
    • pp.129-134
    • /
    • 2019
  • Objectives: The objective of this study was to highlight the role of lateral arthroplasty along with interposition of the buccal fat pad (BFP) in the management of Sawhney type III temporomandibular joint (TMJ) ankylosis. Materials and Methods: Ten patients with TMJ ankylosis (7 unilateral and 3 bilateral, total of 13 joints) were treated with lateral arthroplasty and BFP interposition. The bony bridge of the ankylotic mass on the lateral aspect was resected, leaving a distance of 1.5 to 2.0 cm from the base of the skull to the neck of the condyle. The condyle was left intact. Coronoidectomy was performed on the ipsilateral side via the same approach in all cases. The inter-incisal opening was measured at that time, and if it was less than 35 mm, contralateral coronoidectomy was performed by using the intra-oral approach. After satisfactory inter-incisal mouth opening (${\geq}35mm$) was achieved, the TMJ surgical site was revisited, and BFP was retrieved and used to cover the lateral aspect of the medially placed condyle. Results: With lateral arthroplasty, the medially displaced condyle can be left in-situ to maintain the mandibular ramal height and function and to act as a growth center in children. Interposition of the BFP prevents reformation of the lateral bony bridge that was removed. Conclusion: Lateral arthroplasty along with interpositioning of the BFP is a novel technique for managing Sawhney type III ankylosis that achieves management goals while avoiding complex and advanced reconstructive surgical procedures.

Risk factors of medication-related osteonecrosis of the jaw: a retrospective study in a Turkish subpopulation

  • Sahin, Onur;Odabasi, Onur;Aliyev, Toghrul;Tatar, Birkan
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.45 no.2
    • /
    • pp.108-115
    • /
    • 2019
  • Objectives: Medication-related osteonecrosis of the jaw (MRONJ) is a well-known side effect of certain drugs that are used to influence bone metabolism to treat osteometabolic disease or cancers. The purpose of our study was to investigate how high-concentration and low-concentration bisphosphonate (BP) intake affects the disease severity. Materials and Methods: Data collected from the medical records of 52 patients treated with BPs, antiresorptive, antiangiogenic drugs and diagnosed with MRONJ were included in this study. Age, sex, type of systemic disease, type of drug, duration of drug treatment, jaw area with MRONJ, drug administration protocol, and MRONJ clinical and radiological findings were obtained. Patients were divided into two groups: anti-neoplastic (Group I, n=23) and anti-osteoporotic (Group II, n=29). Statistical evaluations were performed using the IBM SPSS ver. 21.0 program. Results: In both groups, more females had MRONJ. MRONJ was found in the mandibles of 30 patients (Group I, n=14; Group II, n=16). When we classified patients according to the American Association of Oral and Maxillofacial Surgeons staging system, significant differences were seen between groups (${\chi}^2=12.23$, P<0.01). More patients with advanced stage (stage 2-3) MRONJ were found in Group I (60.9%). Conclusion: According to our results, high-concentration BP intake, age and duration of drug intake increased disease severity.