• 한국시뮬레이션학회논문지
• /
• 제30권3호
• /
• pp.31-39
• /
• 2021

포 사격 시에는 폭풍파 형태로 전파되는 과도한 수준의 충격소음이 발생한다. 포 사격 충격음은 주위 구조물의 안정성에도 영향을 미치게 되므로 아군의 포 사격으로 피해를 받지 않으려면 포와 구조물은 적정거리를 이격시켜야 한다. 그러나 이미 적정거리 이하로 건축되어 있는 경우에는 포와 구조물 사이에 방음벽을 세워 피해를 방지할 수 있다. 본 연구에서는 포와 구조물의 적정 이격거리를 산출하였으며, 경계요소법(Boundary Element Method)을 활용하여 방음벽의 다양한 높이와 형태에 의한 삽입손실을 시뮬레이션하였고 최적의 방음벽을 선정하였다.

• 한국세라믹학회지
• /
• 제34권1호
• /
• pp.23-30
• /
• 1997

SrCO3 TiO2, 그리고 Nb2O5를 출발원료로 하여 환원분위기하에서 반도성 SrTiO3 소결첼르 제조하였다. 반도성 다결정 소결체 내에서 acceptor 역할을 할 수 있는 Na과 K 이온을 입계를 따라 80$0^{\circ}C$~120$0^{\circ}C$ 온도범위에서 확산시킨 후, 열처리조건에 따른 입계의 전기적 화학적 특성을 고찰하였다. 이차열처리한 소결체의 입계에는 일정한 전기적 포텐셜장벽과 이에 상관된 전자고갈영역이 형성되어 비선형적인 전류-전압 특성을 보이고 문턱전압(threshold voltage)은 10~70V, 입계포텐셜장벽은 0.1~2eV의 크기를 나타내었다. Na과 K 이온은 입계로부터 입자내부로 확산하여 20~50 nm 깊이의 확산층을 형성하며, 이들 확산층에서 Na 또는 K과의 치환에 기인하여 Sr농도가 감소하였으며 치환에 따른 전기적 중성유지를 위하여 산소 vacancy 농도가 증가하였다.

• Wind and Structures
• /
• 제4권5호
• /
• pp.399-412
• /
• 2001

Simultaneous pressure and force measurements have been conducted on a stationary box deck section model for two configurations (namely without and with New Jersey traffic barriers) at various angles of incidence. The mean and fluctuating aerodynamic coefficients and pressure coefficients were derived, together with their spectra and with the coherence functions between the pressures and the total aerodynamic forces. The mean aerodynamic coefficients derived from force measurements are first compared with those derived from the integration of the pressures on the deck surface. Correlation between forces and local pressures are determined in order to gain insight on the wind excitation mechanism. The influence of the angle of incidence on the pressure distribution and on the fluctuating forces is also analysed. It is evidenced how particular deck section areas are more responsible for the aerodynamic excitation of the deck.

• 한국시스템다이내믹스연구
• /
• 제9권2호
• /
• pp.27-43
• /
• 2008

This study investigates market barriers in increasing the market share of Alternative Fuel Vehicles (AFVs). In particular, this study first conceptualizes the AFVs market model with the aid of generic system archetypes suggested by Wolstenholme. Among four generic system archetypes suggested by Wolstenholme, the market structure of AFVs can be explained by the 'relative achievement' archetype. Starting from the generic system archetype, this study extends the model boundary step by step to take account of various model assumptions necessary to simulate the model numerically. If there is a significant network effect on vehicle operating costs, it is difficult to achieve the shift to AFVs even in the long term without a policy intervention because the car market is locked into the current structure. There are several possible policy options to break the 'locked-in' structure of the car market, such as subsidies on vehicles, subsidies on fuels, and a niche management policy.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1778-1783
• /
• 2000

When visual intrusion is an important factor, it is desirable to find alternative methods of improving the insertion loss of a noise barrier without increasing the height. Therefore, the primary object of the work attenuates the noise due to transport vehicle by small interference device installed at noise barrier edge. In this paper the performance of noise barriers with attached interference device, in terms of shape, absorptive material and split panel, are examined using the boundary element approach. Also, the scale models are moanted in an anechoic chamber and the frequency of the sound sources are appropriately scaled to simulate full scale site conditions. Lastly, experimental measurements of the designs are executed for a range of frequencies and receiver positions, and are compared with the results of numerical modeling.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.31-38
• /
• 2016

The FDS-HCIB method is expanded to simulate water-oil-air flows around oil booms under relative motion, which is intended to increase the thickness of contained oil. The FDS scheme captures discontinuity in the density field and abrupt change of the tangential velocity across an interface without smearing. The HCIB method handles relative motions of thin oil booms with ease. To validate the developed FDS-HCIB code for water-oil-air flow around a moving body, the computed results are compared with the reported experimental results on the shape, length, and thickness of the oil slicks under towing. It is observed that the increase in pressure field between two barriers lifts the oil slick and the interfacial wave propagates and reflects as one barrier gets closer to the other barrier.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.537-542
• /
• 2000

When visual intrusion Is an Important factor, it is desirable to find alternative methods of Improving the insertion loss of a noise barrier without Increasing the height. Therefore, the primary object of the work attenuate the noise due to railway by small interference device installed at noise barrier edge. In this paper the performance of noise barriers with attached interference device, in terms of shape, absorptive material and split panel, we examined using the boundary element approach. Also, the scale models are mounted in an anechoic chamber and the frequency of the sound sources are appropriately scaled to simulate full scale site conditions. Lastly, experimental measurements of the designs are executed for a range of frequencies and receiver positions, and are compared with the results of numerical modeling.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.325-331
• /
• 2016

A bathtub vortex above the outlet of a rotating barrel is simulated. By analyzing the Ekman layer theory, it can be found that the main flow circulation is inversely proportional to the thickness of Ekman layer. The thicker the Ekman boundary layer, the weaker the rotational strength and the shorter of the length of gas core is. According to this law, models of barriers with rods of different heights are established. The reduction of air-core length in this air entrainment vortex and weakening the strength of rotation field were achieved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.202-205
• /
• 1997

We investigated grain boundary effect for terrestrial applications of solar cell\ulcorner with low cost, large area, and high efficiency. Grain boundaries are known as potential barriers and recombination centers for the photo-generated charge carriers, which make it difficult to achieve a high efficiency cell. To reduce these effects of grain boundaries, we investigated various influencing factors such as thermal treatments, various grid patterns, selective wet etchings for grain boundaries, buried contact metallizations along grain boundaries, and use of metallic thin films. From the various grid patterns we learned that the series resistance of solar cell reduced open circuit voltage and consequently decreased the cell efficiency. This paper describes the effect of various grid patterns and the employment of metallic thin films for a top electrode.

• Wind and Structures
• /
• 제29권1호
• /
• pp.33-41
• /
• 2019

The interaction of head waves with an infinite row of identical, equally spaced, rectangular breakwaters is investigated in the presence of uneven bottom topography. Using linear water wave theory and matched eigenfunction expansion method, the boundary value problem is transformed into a system of linear algebraic equations which are numerically solved to know the velocity potentials completely. Utilizing this method, reflected and transmitted wave energy are computed for different physical parameters along with the wave field in the vicinity of breakwaters. It is observed that the wave field becomes more complicated when the incoming wavelength becomes smaller than the channel width. A critical ratio of the gap width to the channel width, corresponding to the inflection point of the transmitted energy variation, is identified for which 1/3 of the total energy is transmitted. Similarly, depending on the incident wavelength, there is a critical breakwater width for which a minimum energy is transmitted. Further, the accuracy of the computed results is verified by using the derived energy relation.