• 한국세라믹학회지
• /
• 제31권6호
• /
• pp.587-594
• /
• 1994

(Ba, Sr)TiO3-based PTCR ceramics were sintered and cooled down with various cooling conditions in the air. AES was applied to investigate the composition change in the grain boundary and bulk area of oxidatively cooled samples. Ba component was deficit in grain boundary region, while oxygen was abundant than bulk region. The discrete changes of oxygen binding energies were confirmed in the grain boundary region of the heavily oxidized samples. It was supposed that the large binding energy shift resulted from the oxidation of the segregated Mn in grain boundary region and this idea was supported by the DV-X$\alpha$ molecular energy simulation.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.11-18
• /
• 2003

The soot formation and oxidation characteristics with different radiation boundary conditions have been studied experimentally in a co-flow ethylene/air laminar diffusion flame. The boundary conditions are two cases, one is a fully refractive radiation boundary condition by a polished aluminum cylinder(AL) and the other is a fully absorbing radiation boundary condition by a black body cylinder(BB). The AL case compared with BB condition show the lower inception point, denser soot volume fraction, wider and longer annular soot area owing to the reabsorption of radiating energy.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권11호
• /
• pp.637-642
• /
• 2000

IEEE 1149.1 boundary scan architecture is used as a standard in board-level system testing. The simplicity of this architecture is an advantage in system testing, but at the same time, it it makes a limitation of applications. Because of several problems such as 3-state net conflicts, or ambiguity issues, interconnect testing for multi-drop multi-board systems is more difficult than that of single board systems. A new approach using IEEE 1149.1 boundary scan architecture for multi-drop multi-board systems is developed in this paper. Adding boundary scan cells on backplane bus lines, each board has a complete scan-chain for interconnect test. This new scan-path insertion method on backplane bus using limited 1149.1 test bus less area overhead and mord efficient than previous approaches.

• Wind and Structures
• /
• 제7권2호
• /
• pp.131-144
• /
• 2004

A technique for the simulation of atmospheric boundary layers in wind tunnels is developed and tested experimentally. The device consists of a grid made of seven horizontal and vertical evenly distributed bars in which air injection holes are drilled in order to influence the flow in the wind tunnel. The air flow in each bar can be controlled independently. Firstly, the device is used together with a rough carpet, which covers the test section floor, in order to simulate the boundary-layer characteristics over an open rural area. Hot-wire measurements, performed at different positions in the test-section, show the capability of the grid in generating the required boundary layer. An acceptable agreement with statistical values of mean velocity and turbulence profiles has been achieved, together with a good span-wise homogeneity. The results are also compared with those of a passive simulation technique based on the use of spires.

• 한국연소학회지
• /
• 제18권3호
• /
• pp.31-37
• /
• 2013

Numerical simulations are conducted to investigate the feature of spontaneous ignition of hydrogen within a certain length of downstream tube released by the failure of pressure boundaries of various geometric assumption. The results show that the ignition feature can be varied with the shape of pressure boundary. The ignition at the contact region are developed at the spherical pressure boundaries due to multi-dimensional shock interactions, whereas the local ignition is developed in limited area such as boundary layer at the planar pressure boundary conditions. The spontaneous ignition inside the tube can be generated from the reaction region of only boundary layer regardless of existence of the reaction of core region.

• 대한설비공학회지:설비저널
• /
• 제14권4호
• /
• pp.293-299
• /
• 1985

This paper describes an economical prediction procedure for heat transfer phenomenon through a channel containing an abrupt asymmetric expansion in flow cross-seetional area. Numerical solutions for the flow field are obtained by the finite difference numerical method applied to the modified boundary layer equations. Modified boundary energy equation is used to analyze heat transfer as modified boundary momentum equation. Predictions of the method compare very favorable with exprimental data. Results of this study by modified boundary layer equation are as follows : 1. The computation time required for the scheme is at least an order of magnitude less than for the numerical solution of the full Navier-stokes and Energy eguations. 2. In laminar flow, the maximum heat transfer occurs downstream of the reattachment point.

• 지적과 국토정보
• /
• 제50권2호
• /
• pp.53-68
• /
• 2020

지적재조사사업은 지적공부의 등록사항을 조사·측량하여 기존의 지적공부를 디지털에 의한 새로운 지적공부로 대체함과 동시에 지적공부의 등록사항이 토지의 실제 현황과 일치하지 아니하는 경우 이를 바로 잡기 위하여 실시하는 국가사업이며 사업기간은 일반적으로 1년 6개월 내지 2년 정도 소요되지만 토지소유자간의 이해관계가 얽혀 복잡한 구조 및 내적 갈등으로 지적재조사 측량을 마치고 조정금 과정에서 발생되는 문제점으로 소요기간이 길어지고 있는 실정이다. 현실경계로 경계를 설정한 이후 토지소유자별로 필지의 면적을 확정하고 지적소관청은 확정된 면적과 지적공부상 면적의 증감에 따라 조정금 산정으로 정산하여 지적재조사사업을 완료하도록 하고 있다. 따라서 조정금과 관련하여 조정금 산정의 시기 및 조정금 산정방법에 대하여 적용한 실증연구를 통하여 합리적인 조정금이 적용될 수 있도록 해결방안을 제시하였다. 개선방법을 통하여 토지소유자와 합의를 최단기간으로 이끌 수 있는 기대효과가 나타났으며 지적재조사사업의 본 취지에 부합하는 현실경계로 설정이 가능하다는 효과도 나타났다. 지적재조사사업과 병행연구를 통하여 표준지 조정금 산정 방법과 조정금 부과방식과 조정금이 부과 되지 않는 경계조정방식의 개선방안을 제시한 본 연구로 지적재조사사업이 2030년까지 완료될 수 있기를 기대한다.

• 한국IT서비스학회지
• /
• 제19권5호
• /
• pp.33-47
• /
• 2020

In recent years, due to the demand for operating efficiency and cost reduction of industrial facilities, remote access via the Internet is expanding. the control network accelerates from network separation to network connection due to the development of IIoT (Industrial Internet of Things) technology. Transition of control network is a new opportunity, but concerns about cybersecurity are also growing. Therefore, manufacturers must reflect security compliance and standards in consideration of the Internet connection environment, and enterprises must newly recognize the connection area of the control network as a security management target. In this study, the core target of the control system security threat is defined as the network boundary, and issues regarding the security architecture configuration for the boundary and the role & responsibility of the working organization are covered. Enterprises do not integrate the design organization with the operation organization after go-live, and are not consistently reflecting security considerations from design to operation. At this point, the expansion of the control network is a big transition that calls for the establishment of a responsible organization and reinforcement of the role of the network boundary area where there is a concern about lack of management. Thus, through the organization of the facility network and the analysis of the roles between each organization, an static perspective and difference in perception were derived. In addition, standards and guidelines required for reinforcing network boundary security were studied to address essential operational standards that required the Internet connection of the control network. This study will help establish a network boundary management system that should be considered at the enterprise level in the future.

• 한국측량학회지
• /
• 제31권2호
• /
• pp.111-119
• /
• 2013

항공 라이다로부터 획득한 대용량의 3차원 점 데이터로부터 대상 물체의 윤곽정보를 추출하는 것은 데이터 처리 과정에서 필수적이며 기반적인 기술 중의 하나이다. 특히 인공 구조물인 건물은 복잡한 현대 도시를 구성하는 주요 구조물이며 그 형태가 명확하기에 윤곽 정보의 추출 과정이 더욱 중요하다 할 수 있다. 본 연구에서는 항공 라이다를 이용하여 얻어진 건물을 구성하는 3차원 점 데이터로부터 건물의 윤곽정보를 추출하기 위하여 점 데이터의 기하정보만을 이용한 확장 카이(${\chi}$-Chi) 알고리즘을 제안한다. 제안된 알고리즘은 임의의 점군을 델로니(Delaunay) 삼각망으로 구성하고 특정 조건을 만족하는 변(edge)를 제거하는 과정을 통하여 구현된다. 덧붙여, 전체적인 추출과정의 효율화를 위해서 델로니 삼각망의 구성을 스윕헐 알고리즘을 적용하여 수행하였다. 본 연구에서 제안하는 확장 카이 알고리즘의 성능을 확인하기 위하여 본 연구와 같은 목적으로 개발된 인케이싱 폴리곤 제작 알고리즘과 알파 쉐이프 알고리즘을 비교하였고 기 제작된 건물의 도화정보를 이용하여 윤곽정보 추출의 정확도를 비교하였다. 실험결과, 본 연구에서 제안한 알고리즘은 기존의 알고리즘들보다 윤곽정보 추출 속도 및 정확도가 향상됨을 확인하였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.460-465
• /
• 2001

Pollutant load using unit load method is calculated by simply equation, especially, very useful in the area that didn't exist about water quality data. However, it takes long time to calculate pollutant load with area in which there is various pollutants and if the boundary of a basin altered, the work of calculation about pollutant load must be begun from the first again. Therefore, a Total Daily Load Program(TDLP) was developed to calculate pollutant load automatically in rural area. The TDLP includes a geographic information system(GIS), relational database system(RDBS), User Interface. This Program can provide user with creating a boundary of the basin that user is concerned with to satisfy the water quality regulations and calculating daily load for various pollutants. The effort was conducted to apply the developed TDLP to calculating pollutant load in rural basin called Bok-ha river.