• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.152-157
• /
• 2000

Si3N4/SiC nanocomposite ceramics containing 5 wt%dispersed SiC particles were prepared by gas-pressure-sintering at 200$0^{\circ}C$ under nitrogen atmosphere. SiC particles with average sizes of 0.2 and 0.5${\mu}{\textrm}{m}$ were used, and the effect of the SiC particle size on the microstructure was investigated. The addition of SiC particles effectively suppressed the growth of the Si3N4 matrix grains. The effect of grain growth inhibition was higher in the nanocomposites dispersed with fine SiC. SiC particles were dispersed uniformly inside Si3N4 matrix grains and on grain boundaries. When the fine SiC particles were added, large fraction of the SiC particles was trapped inside the grains. On the other hand, when the large SiC particles were added, most of the SiC particles were located on grain boundaries. Typically, the fraction of SiC particles located at grain boundaries was higher in the specimen prepared from $\beta$-Si3N4 than in the specimen prepared from $\alpha$-Si3N4.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.518-522
• /
• 2011

Cartesian grid system has mainly been used in the casting simulation even though it does not nicely represent sloped and curved surfaces. These distorted boundaries cause several problems. A special treatment is necessary to clear these problems. A cut cell method on Cartesian grids has been developed to simulate three-dimensional mold filling Cut cells at a cast-mold interface are generated on Cartesian grids. Governing equations were computed using volume and areas of cast at cut cells. In this paper, we propose a new method that can consider the cutting cells which are cut by casting and mold based on the patial cell treatment (PCT). This method provides a better representation of geometry surface and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian gird system. Various test examples for several casting process were computed and validated. The analysis results of more accurate fluid flow pattern and less momentum loss owing to the stepped boundaries in the Cartesian grid system were confirmed. We can know the momentum energy at the cut cell is conserved by using the cut cell method. By using the cut cell method. performance of computation gets better because of reducing the whole number of meshes.

• 한국연소학회지
• /
• 제21권1호
• /
• pp.8-17
• /
• 2016

Downstream interactions between lean premixed flames with mutually different fuels of syngas and $CH_4$ have been numerically investigated particularly on and near lean extinction limits. The interaction characteristics between lean premixed (50% $H_2$ + 50% CO)-air and $CH_4$-air flames were shown to be quite different from those between the same hydrocarbon flames. The lean extinction boundaries were of slanted shape, thereby implying strong interactions. The weaker flames had negative flame speeds on the upper extinction boundaries, whereas the weaker flame speeds on the lower extinction boundaries were both negative and positive. The results also showed that the flame interaction characteristics did not follow the general tendency with the dependency of Lewis number in downstream interactions between the same hydrocarbon flames. Importance of chemical interaction in flame characteristics is discussed in the downstream interactions between lean premixed (50% $H_2$ + 50% CO)-air and $CH_4$-air flames.

• 열처리공학회지
• /
• 제5권2호
• /
• pp.85-94
• /
• 1992

Microstructural evolution of wrought Inconel 718 superalloy with different heat treatment conditions was studied. Heat treatment was performed via conventional(CHT), modified(MHT), Merrick(MeHT) and modified Merrick (MMeHT) methods. The size of ${\gamma}^{\prime}$ and ${\gamma}^{\prime\prime}$ precipitates which are principal strengthening phases in Inconel 718 superalloy increase in order of CHT, MHT, MeHT. For the case of MMeHT, a coexistence of fine ${\gamma}^{\prime\prime}$ precipitate and very coarse particles due to exess growth of ${\gamma}^{\prime\prime}$, which is called bimodal distribution, was observed. CHT gave the finest grain size. (Ti, Nb)C carbide and needle-like ${\delta}$ phase were formed together at grain boundaries for CHT, and were formed both inside and at boundaries of grains for MHT, MeHT and MMeHT. Morphology of partially serrated grain boundaries was developed in all heat treatment conditions except CHT.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.377-379
• /
• 2005

This study has been conducted to clarify the effect of sulfur content and welding thermal cycles on reheat cracking susceptibility in the multi-pass weld metal of Fe-36%Ni alloy. Reheat cracking occurred in the preceding weld pass reheated by subsequent passes. Microscopic observations showed that reheat cracking propagated along grain boundaries which resulted in intergranular brittle fractures. The region where reheat cracking occurred and the number of cracks increased with the increase in sulfur content of the alloys. These experimental results suggested that reheat cracking was associated with the embrittlement of grain boundaries, which was promoted by sulfur and subsequent welding thermal cycles. AES analysis indicated that the sulfur segregation occurred at grain boundaries in the reheated weld metal. On the basis of these results, the cause of reheat cracking in multi-pass welding can be attributed to hot ductility loss of weld metals due to sulfur segregation which was accelerated by the reheating with multi-pass welding thermal cycles.

• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.3-13
• /
• 2016

The development impact fee (DIF) zoning is used to adequately provide the pre-planned urban infrastructures in those urban and regional sectors where significant urban sprawl has already taken place followed by the rapid population growth. The infrastructure installation fees are levied to those landowners whose properties belong to the DIF zone in which they enjoy the direct benefits that accrue from the installed infrastructures. While the law is deemed to be equitable in that the actual beneficiaries pay for their benefits, it is required to designate the zone boundaries accurately and consistently since they are the very dividers that differentiate the legitimate fee-payers and the free-riders. This study, especially, tries to test a seemingly advanced alternative, so-called the cost-weighted distance measure, as a potential candidate to replace the current air-distance measures to designate the zone boundaries. The statistics indicate that the coefficient of variation for major indices spread from 11.75 to 35.6 in the case of the latter method, it only ranges from 0.21 to 0.76 in the case of the former. The zonal outcomes also show much higher consistency in their shapes. It is hoped, in this context, that the study findings could possibly be adopted in the future research efforts expected soon to amend and improve the current DIF zoning law.

• Ocean and Polar Research
• /
• 제29권1호
• /
• pp.55-67
• /
• 2007

A reference to natural prolongation appeared for the first time in the North Sea Judgement. Although it was not suggested that the concept of natural prolongation would automatically allow for the fixing of a continental shelf boundary, that concept encouraged States to request international tribunals to determine continental shelf boundaries on the basis of the geological and geomorphological features of the seabed. In the Libya v. Malta Case, however, the rejection of geological and geomorphological factors was total. Especially, Natural prolongation was the then checkmated as a relevant fact in delimitation between coasts situated less than 400 nm. apart. There can be no doubt that, in several disputed cases, prominent geomorphological variations are simply ignored ; nevertheless, there are also a few agreements where geological and geomorphological characteristics come into play and, to a certain extent, affect maritime boundaries. Physical characteristics of sea-bed are generally given serious consideration in the boundary delimitation such as the final negotiated boundary of the Australia-Indonesia Continental Shelf boundary Agreement(Timor and Arafura seas) which follows the continental slope bordering the Timor Trench.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.120-125
• /
• 2000

This study analyzes agricultural water demand nationwide which calculated by the estimation system for agricultural water demand(ESAD) with the data are observed in the other Studies. The results are as follows. Maximum, minimum and average values of annual evapotranspiration in paddy in 1,767 boundaries covering all the country are estimated as 819.2mm, 595.2mm and 702.9mm respectively. In the case of transplant seeding, the annual effective rainfall is estimated as 834.7mm to 464.3mm, while the average is 635.3mm. The amount of effective rainfall is largest in case of transplant seedlings and then come watered direct seeding and dry direct seeding regardless of region. Maximum, minimum and average values of annual evapotranspiration in upland in 1,767 boundaries are estimated as 659.97mm, 129.3mm and 411.8mm respectively. The annual effective rainfall is estimated as 607.2mm to 68.3mm while the average is 257.4mm. infiltration ratio in paddy in 1,767 boundaries applied in ESAD is 5.06mm/day in average, varying from 12.0mm/day to 2.0mm/day. Applied conveyance loss is 12.8% in average, varying from 18.0% to 8.0%.

• 대한조선학회지
• /
• 제24권4호
• /
• pp.19-36
• /
• 1987

In this research the coupling problem between the elastic structure and the fluid, specially the hydroelastic harmonic vibration problem, is studied. In order to couple the domains, i.e., the structural domain and the fluid domain, the boundary integral method(direct boundary integral formulation) is used in the fluid domain in combination with the finite element method for the structure. The boundary integral method has been widely developed to apply it to the hydroelastic vibration problem. The hybrid boundary integral method using eigenfunctions on the radiation boundaries and the boundary integral method using the series form image-functions to replace the even bottom and free surface boundaries in case of high frequencies have been developed and tested. According to the boundary conditions and the frequency ranges the different boundary integral methods with the different idealizations of the fluid boundaries have been studied. Using the same interpolation functions for the pressure distribution and the displacement the two domains have been coupled and using Hamilton principle the solution of the hydroelastic have been obtained through the direct minimizing process. It has become evident that the finite-boundary element method combining with the eigenfunction or the image-function method give good results in comparison with the experimental ones and the other numerical results by the finite element method.

• 정보처리학회논문지B
• /
• 제10B권5호
• /
• pp.521-526
• /
• 2003

본 논문에서는 영역의 경계를 추출하기 위해 영상의 밝기 정보와 곡선전개 방식을 이용한 기하 활성 모델을 제안한다. 영역의 경계를 추출하는 문제를 추출한 영역의 평균 밝기 값과 전개중인 폐곡선 영역의 밝기 값의 차론 최소화시키는 것으로 설정한다. 최적의 해를 구하는 방법으로 레벨세트 이론을 적용한 곡선전개 방법을 이용한다. 이 방식은 일반적인 활성 모델에 비해 초기 곡선 설정에 제약이 없고 동시에 여러 영역의 경계 추출이 가능하다. 제안 모델은 에지 정보가 충분치 못한 영상의 경우에도 일반적인 에지 기반 방식에 비해 추출 결과가 양호하였다. 비등방성 확산 필터를 사용하여 영상을 전처리 함으로써 보다 나은 추출이 수행되었다. CT나 MRI 영상을 이용하여 모델의 성능을 확인하였다.